Am 11.11.24 um 00:39 schrieb Crist Clark:
https://www.juniper.net/documentation/us/en/software/junos/cli-reference/topics/ref/statement/auto-negotiation-edit-interfaces.html
<https://www.juniper.net/documentation/us/en/software/junos/cli-reference/topics/ref/statement/auto-negotiation-edit-interfaces.html>
NOTE: 1G optical transceivers do not support auto-negotiation on EX4100
1G/10G uplink module (PIC 1/PIC 2) and EX4400 1G/10G interface. 1G-T
supports auto-negotiation on these ports.
Shit, I figured as much.
In the lab I have just successfully tested Arista SFP-10G-RA-1G-LX (rate
adapting transceivers, 10G on the electrical side and 1G on the optical
side) and the link came up just fine. So that's an option for
small-scale, but these transceivers are quite expensive. Haven't found
them 3rd party yet.
Bernhard
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
