Hello, Thank you very much everyone for the help.
It seems that `netraven` nailed it. I missed the part where QFX5110 could not support multiple forwarding instances. I will have to go back to the legacy protocol then :/ Replacing IPv6 addresses with IPv4 addresses, keeping the same config, worked on first try. Thank you again ! Denis Le Mon, Nov 27, 2023 at 10:52:52AM +0100, [email protected] a écrit : > Dennis, > > On Sat, 25 Nov 2023 at 15:26, Denis Fondras via juniper-nsp > <[email protected]> wrote: > > Can you give a clue ? I haven't found any information on wether it could > > work on > > QFX5110. > > Looking at the two pages below. > 1. The QFX5120 (assuming this also applies to the QFX5120-32C model) > *only* supports the default-switch forwarding instance. > 2. And IPv6 underlays seem to be *exactly not* supported for the > default-switch forwarding instance. > > If I take this from what it reads. It looks like you cannot archive > what you are trying atm. > > Try asking JTAC to confirm this? > > From: > https://www.juniper.net/documentation/us/en/software/junos/evpn-vxlan/topics/concept/mac-vrf-routing-instance-overview.html#xd_4081e20476f017c2--1e138ae7-1795628658a--7dbc__subsection_mac-vrf-service-types > """ > EX4400, QFX5100, QFX5110, QFX5120, QFX5200, QFX5130-32CD, and QFX5700 > switches, and PTX10001-36MR, PTX10004, PTX10008, PTX10016 routers > These devices support only one forwarding instance (default-switch). (...) > """ > > From: > https://www.juniper.net/documentation/us/en/software/junos/evpn-vxlan/topics/topic-map/vxlan-ipv6-underlay-overview.html > """ > (QFX Series switches) You must use MAC-VRF routing instances with EVPN > protocol and VXLAN encapsulation. We don't support IPv6 underlays with > other instance types such as evpn, evpn-vpws, virtual-switch or the > default switching instance. > """ _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
