I know of a few methods for steering traffic in MPLS-TE/RSVP-TE, I've done this in IOS-XR, but not in Junos at this point... but i found this link that might help in Junos... https://www.inetzero.com/in-control-with-rsvp/
One way is to change the te-metric on that P router that you don't want lsp to pass through...but that might be too global as it would seem to affect all TE LSP's passing through there. set protocols isis interface ge-0/0/1 level 1 te-metric 100 clear lsp to re-signal Make sure to do that on the opposite side te tunnel as you usually need to setup one in each direction as a te tunnel is unidirectional... however, i just learned of corouted-bidirectional, seems interesting https://www.juniper.net/documentation/en_US/junos/topics/topic-map/basic-lsp -configurtion.html#id-configuring-corouted-bidirectional-lsps again, this seems to be a nice and easy way to exclude a P router in cisco ios-xr from the te head-end, i don't know of the junos equivelent for this conf explicit-path name not-r2 index 1 exclude-address ipv4 unicast 10.2.2.2 commit -Aaron _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
