I tried to play with almost all options in gigether-options section without any
results. Port is UP but it still not working properly.
admin@mx1> show configuration interfaces xe-0/1/4
description TEST;
gigether-options {
no-flow-control;
no-auto-negotiation;
speed 1g;
}
unit 0 {
family inet {
address xx.xx.xx.xx/30;
}
}
When i removed "speed 10g" from chassis section and bounced FPC port was DOWN.
> Wiadomość napisana przez Tobias Heister <[email protected]> w dniu
> 09.10.2020, o godz. 14:44:
>
> Hi,
>
> Am 09.10.2020 um 13:12 schrieb Łukasz Trąbiński:
>> In Lab I'm trying to set up 1G port on MX204.
>
> You might need to play around with autoneg options. we have a working 1G LX
> SFP running on 18.4R1-S7 on MX204
>
> in our case thats the gigether section:
> gigether-options {
> no-flow-control;
> no-auto-negotiation;
> speed 1g;
> }
>
> Not sure if the Flow Control stuff was mandatory, but without the
> no-auto-negotation the link was not useable. It might also help to check
> autoneg settings on the other end (if you have access).
>
> --
> Kind Regards
> Tobias Heister
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
