Rename the interface ge-0/1/4
admin@mx1> show interfaces xe-0/1/4
Physical interface: xe-0/1/4, Enabled, Physical link is Up
Interface index: 154, SNMP ifIndex: 530
Description: TEST
Link-level type: Ethernet, MTU: 1514, MRU: 1522, LAN-PHY mode,
Speed: 10Gbps,
On 09/10/2020, 13:16, "juniper-nsp on behalf of Łukasz Trąbiński"
<[email protected] on behalf of [email protected]> wrote:
Hello
In Lab I'm trying to set up 1G port on MX204.
admin@mx1> show configuration interfaces xe-0/1/4
description TEST;
gigether-options {
speed 1g;
}
unit 0 {
family inet {
address 192.168.1.138/30;
}
}
admin@mx1> show configuration chassis fpc 0 pic 1 port 4
speed 10g;
Port is UP, but I can’t see any MAC address from remote side or I can’t
ping remote side.
admin@mx1> show interfaces xe-0/1/4
Physical interface: xe-0/1/4, Enabled, Physical link is Up
Interface index: 154, SNMP ifIndex: 530
Description: TEST
Link-level type: Ethernet, MTU: 1514, MRU: 1522, LAN-PHY mode, Speed:
10Gbps,
BPDU Error: None, Loop Detect PDU Error: None, MAC-REWRITE Error: None,
Loopback: None, Source filtering: Disabled, Flow control: Enabled,
Speed Configuration: 1G
Junos: 18.4R3-S5.4 but also tried on 18.4R3.3. I also setup
auto-negotiation and fec options but without success.
SFP:
Xcvr 4 REV 01 740-011614 PJD2XXX SFP-LX10
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
