--- Begin Message ---
Hello,
Firstly, Your example configuration with static /24 routes and
qualified-NH to IFL does not commit - even after fixing the host portion
- with error message "subnet routes are not allowed with MAC NH".
Secondly, You could have second static 198.51.100.0/24 resolve via 1st
/32:
set routing-instances internet routing-options static route
192.0.2.11/32 qualified-next-hop et-0/0/0.2766
set routing-instances internet routing-options static route
198.51.100.0/24 next-hop 192.0.2.11 resolve
Thanks
Alex
------ Original Message ------
From: "Baldur Norddahl" <[email protected]>
To: "Juniper List" <[email protected]>
Sent: 12/02/2020 23:04:37
Subject: [j-nsp] static arp with unnumbered-address
Hello
How do you program in a static arp entry on an interface that is using
family inet unnumbered-address ?
Eg.:
interface ps1 {
unit 2766 {
proxy-arp restricted;
vlan-tags outer 402 inner 1016;
family inet {
unnumbered-address lo0.1;
}
}
}
routing instance internet routing-options {
interface et-0/0/0.2766;
static {
route 192.0.2.11/24 {
qualified-next-hop et-0/0/0.2766;
}
route 198.51.100.22/24 {
qualified-next-hop et-0/0/0.2766;
}
It is not possible to have the juniper router do correct arp in this case.
You can have the 192.0.2.0/24 range working or you can have the
198.51.100.0/24 working using preferred source address but not both. So I
figured I could get away with simply hard coding the arp entry. However
static arp is in the family inet address subtree so can not be specified
here. Seriously ?
Regards,
Baldur
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
--- End Message ---
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
