Yes there is no equivalent MX Services to SPC3 at this time, but this is being worked on. This is supposed to be coming in 19.3, via software only; new SW architecture.
Many [large] customers are running large scale IPSEC termination, but 5G max, from what [little] I know. If someone needs more throughput, they will bond multiple IPSEC tunnels together. As for failover, any failure should cause a switch to redundant module, assuming one is present. HTH, Rich Richard McGovern Sr Sales Engineer, Juniper Networks 978-618-3342 I’d rather be lucky than good, as I know I am not good I don’t make the news, I just report it On 7/18/19, 8:00 AM, "harbor235" <[email protected]> wrote: Is anyone using the ms-mpc for large scale IPSEC termination? above 10G? Data shows 16-24Gps per card 4-6 per NPU. I am interested in real world performance with IMIX. The new SPC3 cards look promising - 40Gbps per slot IMIX juniper marketing data, I dont think these cards are released yet for the MX series. Also, is anyone familiar with service sets for IPSEC on the MS-MPC cards, how is physical interface failures of the inside and outside interfaces handled? thanks in advance, Mike _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
