l2circuit configuration on r03 is fine. I just made mistake putting post on j-nsp. Why should I push and pop on R03 ? See that QinQ (so adding second dot1q tag) is done on catalyst switch.
On Sat, Oct 6, 2018 at 3:07 PM Aaron1 <[email protected]> wrote: > And if that doesn’t work, you might need to push and pop on the R03 side... > > ...also, is customer sending you 300 tagged frames on r01? If not then I > don’t think you should tag and push and pop there on r01 Uni port > > Aaron > > > On Oct 6, 2018, at 8:03 AM, Aaron1 <[email protected]> wrote: > > > > At least fix this on r03... > > > > interface xe-0/0/0.300 > > Should be ... > > interface xe-0/0/1.300 > > > > Aaron > > > >> On Oct 6, 2018, at 2:19 AM, Robert Hass <[email protected]> wrote: > >> > >> interface xe-0/0/0.300 > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
