Hello,
Egress scheduling/shaping on MIC ports - correct, that's why I said
"roughly" equal.
Ingress scheduling/shaping requires Q or EQ MPC which is not supported
on MX80.
Thanks
Alex
------ Original Message ------
From: [email protected]
To: [email protected]; [email protected]
Sent: 05/10/2018 20:20:06
Subject: Re: [j-nsp] MX80 Input Scheduling/Shaping
Ingress scheduling is supported only on Q and EQ MPCs - Juniper MX
series book, 2nd ed, page 598.
MX80 COS capabilities are roughly equal to MPC1, without Q.
Disagree. MX80 does per-VLAN queuing/scheduling/shaping just fine for
ports on MICs. *Not* for the builtin 10G ports.
Steinar Haug, Nethelp consulting, [email protected]
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
