Hi Ivan, I did not, and that did indeed fix it. I don’t understand why it’s necessary so that’ll be my next read.
Thanks! > On Sep 12, 2018, at 7:22 AM, Ivan Ivanov <[email protected]> wrote: > > Hi Jason. > > Do you have 'family mpls' configured for the vRR interfaces? Although the RR > is out of band you need that family configured on the RR interface. > > Ivan, > > On Wed, Sep 12, 2018 at 12:10 PM Jason Lixfeld <[email protected] > <mailto:[email protected]>> wrote: > Hi all, > > Trying to learn more about JunOS, I’m playing around with a vRR instance > (18.2R1-S1.5), and I haven’t been able to get something sorted. > > This vRR instance is running as an out-of-band RR for a few LDP enabled PEs. > vRR is not running LDP so inet.3 is empty, but as far as I understand, any > one of the two routing-options knobs configured below should be enough to > provide for the prefixes in bgp.l3vpn.0 to be able to resolve their > respective next-hops and bring the routes in the table out of hidden to > active. However that’s not happening. > > jlixfeld@rr01# show routing-options | display set | match rib > set routing-options rib inet.3 static route 0.0.0.0/0 <http://0.0.0.0/0> > discard > set routing-options resolution rib bgp.l3vpn.0 resolution-ribs inet.0 > > [edit] > jlixfeld@rr01# run show route table bgp.l3vpn.0 9.9.9.9/32 > <http://9.9.9.9/32> detail hidden > > bgp.l3vpn.0: 29 destinations, 49 routes (0 active, 0 holddown, 49 hidden) > 12345:4:9.9.9.9/32 <http://9.9.9.9/32> (1 entry, 0 announced) > BGP Preference: 170/-391 > Route Distinguisher: 12345:4 > Next hop type: Unusable, Next hop index: 0 > Address: 0x27b17bc > Next-hop reference count: 53 > State: <Hidden Int Ext ProtectionPath ProtectionCand> > Local AS: 12345 Peer AS: 12345 > Age: 1:52:31 Metric: 0 > Validation State: unverified > Task: BGP_12345.10.15.48.11+179 > AS path: 11670 ? > Communities: 12345:2000 12345:2010 target:12345:4 > Accepted > VPN Label: 217 > Localpref: 390 > Router ID: 10.15.48.11 > > [edit] > jlixfeld@rr01# run show route table inet.0 10.15.48.11 > > inet.0: 10 destinations, 10 routes (10 active, 0 holddown, 0 hidden) > + = Active Route, - = Last Active, * = Both > > 10.15.48.11/32 <http://10.15.48.11/32> *[IS-IS/18] 01:51:14, metric 30 > > to 10.15.49.67 via em1.0 > > [edit] > jlixfeld@rr01# > > Is there something less obvious that needs to happen before one of those two > knobs above will work? > > FWIW, I haven’t played around with enabling LDP here, or configuring RIB > groups because I’m not really interested in exploring those as solutions if I > can help it; they seem a little too heavy handed when the aforementioned two > knobs should probably work fine? > > Thanks in advance! > _______________________________________________ > juniper-nsp mailing list [email protected] > <mailto:[email protected]> > https://puck.nether.net/mailman/listinfo/juniper-nsp > <https://puck.nether.net/mailman/listinfo/juniper-nsp> > > > -- > Best Regards! > > Ivan Ivanov _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
