For 6PE you have to: - delete the iBGP ipv6 groups - add family ipv6 labeled-unicast explicit-null to the IPv4 iBGP groups - add ipv6-tunneling to protocol mpls. - make sure your IGP is not advertising IPv6 addresses
This is the way it's configured, with either RSVP-TE or LDP. > Le 29 août 2018 à 15:10, craig washington <[email protected]> a > écrit : > > When I set this up in the lab (logical systems) and followed the Juniper > documentation for setting up 6PE the IPV6 prefixes didn't resolve to LSP's. > The documentation says to add labeled unicast with explicit null and > tunneling. > I had 2 groups, one for v4 and one for v6. I added the commands to v4 group > and didn't see a change. > I removed it all and tried adding it to v6 group and no change. > The only way I got it to work was with mpls tunneling for v6 and on the > export policy for the v6 group I changed the next hop from self to the v4 > address of the advertising PE. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
