Dear Jukka I do not test the plugin on every build, I have tested up to openjump-20070820-0017. If you can send to me your project/layers that cause the problem I will take a look at it.
It may be that if there is no printer installed this may cause a problem - why don't you try installing a printer and let me know hat happens Geoff Rahkonen Jukka wrote: > Hi, > > Daily build works OK as far as I have tested it. Printer plugin seems to > work also, it is just that feeding a new value to the scale box makes system > freese. Actually I don't have any printer installed on my laptop so I have > not been able to test if I could print with the plugin. Ii may well be so > that the printer plugin has never been tested without printer. > > -Jukka- > > > -----Original Message----- > From: [EMAIL PROTECTED] on behalf of Stefan Steiniger > Sent: Fri 21.9.2007 18:56 > To: List for discussion of JPP development and use. > Subject: Re: [JPP-Devel] Cadplan Printer plugin kills my computer > > so it means.. it will work without the plugins well? > > stefan > > Rahkonen Jukka schrieb: > >> Hi, >> >> I was able to reproduce this several times: >> - fresh OJ nightly build openjump-20070921-0020 >> - JumpPrinter and VertexSymbols extensions installed >> - open one polygon layer >> - scale is something like 1:12 633 636 >> >> If I now insert 5000 as scale nominator and press Enter my computer (Windows >> XP) freezes totally. I can't open task manager, even Shut down cannot be >> used. Only way to shut down is to use the power switch. >> >> -Jukka Rahkonen- >> >> >> >> ------------------------------------------------------------------------- >> This SF.net email is sponsored by: Microsoft >> Defy all challenges. Microsoft(R) Visual Studio 2005. >> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ >> _______________________________________________ >> Jump-pilot-devel mailing list >> Jump-pilot-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel >> >> >> > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Jump-pilot-devel mailing list > Jump-pilot-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Jump-pilot-devel mailing list > Jump-pilot-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel > > > -- Dr Geoffrey G Roy Cadplan 129 Gloster Street, Subiaco WA 6008 Tel: (08) 9381 4870 Fax: (08) 9382 4459 Email: [EMAIL PROTECTED] http://www.cadplan.com.au ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Jump-pilot-devel mailing list Jump-pilot-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/jump-pilot-devel
