Just played with the examples in GR.jl/examples. Works really well. Thank you!
On Saturday, 30 July 2016 16:25:44 UTC+1, Josef Heinen wrote: > > The first animation (slide 10) updates a 3d surface frame by frame - the > noise added could also be the result of an intensive calculation or a > real-time signal. There is a demo in the GR example section showing a 3d > power spectrum calculated from the microphone audio input ... > > On Saturday, July 30, 2016 at 11:12:43 AM UTC+2, Thomas Hudson wrote: >> >> This isn't quite what I want: as with the discussion above, while >> the example code has a sequence of predetermined graphs to be plotted, what >> I'm really interested in is plotting the results of a more >> intensive calculation frame by frame as it runs, rather than doing the >> calculation of the entire trajectory, and plotting a manipulable plot after >> the fact. >> >> Nevertheless, it's useful to know that you can do some fancy plot >> manipulation in this way! >> >> On Saturday, 30 July 2016, Josef Heinen <[email protected]> wrote: >> >>> This >>> <https://www.google.com/url?q=https%3A%2F%2Ftwitter.com%2Fjosef_heinen%2Fstatus%2F702885176385380352&sa=D&sntz=1&usg=AFQjCNEJK8hXL6FHoVnKwwDh6beMFSxM5w> >>> is >>> probably what you are looking for. If you need special Matplotlib features, >>> you can even mix GR and PyPlot (see slides 10 and 13 from my >>> <http://www.google.com/url?q=http%3A%2F%2Fpgi-jcns.fz-juelich.de%2Fpub%2Fdoc%2FSciPy_2016%2Fhtml&sa=D&sntz=1&usg=AFQjCNGc29rCC-bHqkKzSLgCf7DP3t0iFQ> >>> SciPy >>> 2016 talk which demonstrate the performance and interoperability) >>> >>> On Friday, July 29, 2016 at 5:03:11 PM UTC+2, Christoph Ortner wrote: >>>> >>>> Thanks for figuring this out, Tom. I'd also be interested in >>>> a Reactive and Interact solution. >>>> >>> >>>
