I figured I'd bring this up again - I'm really hoping someone here has some advice for me on this.
Buehler? JK From: jquery-en@googlegroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Jeffrey Kretz Sent: Friday, October 31, 2008 4:56 PM To: jquery-en@googlegroups.com Subject: [jQuery] Advice on sIEve/Drip While debugging my application (which makes heavy use of jQuery), after several hours IE had consumed about 300MB. So I figure I've got some memory leaks. I tried sIEve 0.8 and wasn't able to find anything specific that was leaking or causing problems. I tried the system, dragged things around, opened various popups, etc. Basically used a while series of functions on the CMS. No leaks reported at any time. I then pulled up one of heavier js pages and put it auto-refresh for about 10 minutes. It slowly went from 61MB to 66MB over a 10 minute period. At no point during the auto-refresh, or during the other stages when I was actually using the system, dragging things around, etc. were any specific leaks reported. Are there other actions I can take to track down the problem? I noticed that sIEve/Drop hasn't been updated in over 2 years, so I'm guessing it's not a maintained project. Is there a better alternative? JK
