I don't know if it is completely clear. I would like to know whether is possible to remap remote usb ports (e.g. my_remote_host@/dev/ttyUSB*) to be used as local usb ports on the server running Jenkins. Otherwise I think the only other distribute solution is to set up a Jenkins slave on a remote PC and build remote jobs from there. In this case it should see the local usb ports correctly.
Il giorno martedì 7 marzo 2017 14:07:40 UTC+1, alessand...@qbrobotics.com ha scritto: > > I'd like to do what follows, but I don't know if it is easy to setup > Jenkins to do so: > > - Run Jenkins from a virtual machine on a server (locate in room A); > - Connect many serial HW devices to a non intelligent system located > in room B and connected to the local network (therefore to the server), > e.g. a switch or something similar which provides USB connection; > - Schedule periodic tests that involves the connected devices, e.g. > request a service from a device and wait for its responce. > - Schedule other tests that involves only the SW. > > I am wondering if this setup could be easily configurated or it is far > better to connect the devices directly to the server (or to the machine > running Jenkins). > -- You received this message because you are subscribed to the Google Groups "Jenkins Users" group. To unsubscribe from this group and stop receiving emails from it, send an email to jenkinsci-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/0de87c3e-510c-4e78-b503-8ea149b64099%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
