I get the 404, but I don't get any errors on the management pages. I don't think that referring to mod_jk as a proxy is strictly correct. See the following for a detailed explanation.
http://tomcat.apache.org/connectors-doc/generic_howto/proxy.html As an aside - mod_proxy_ajp is basically mod_jk. It's just that the configuration is different (both use AJP/1.3 under the covers). You may run into some problems if you're serving Jenkins from differing contexts. For example: 1. Web server - http://hostname/ --> gets to Jenkins 2. Tomcat - http://hostname:8080/jenkins/ --> gets to Jenkins In those cases you'll probably have to do some rewriting. I haven't done extensive Jenkins programming, so I don't know if my setup breaks for any of the use cases mentioned here: https://wiki.jenkins-ci.org/display/JENKINS/Hyperlinks+in+HTML I've also not trolled through all the pages to see if the Location header is being rewritten properly (no port 8080). However, I suspect that it is since the site works. The only issue I'm observing is that pages representing modules in multi-module builds aren't being rendered correctly in Chrome. Much of the formatting and hyperlinks are missing. However, the same pages render correctly in Firefox. I suspect it's a Chrome vs. Jenkins issue. . . . . just my two cents /mde/ On Thursday, March 12, 2015 at 2:00:28 AM UTC-7, Marcos Rey wrote: > > > Forgot to append the output: > > HTTP/1.1 302 Found > Date: Thu, 12 Mar 2015 08:57:51 GMT > Server: Apache/2.2.15 (CentOS) > Cache-Control: private > Expires: Thu, 01 Jan 1970 01:00:00 CET > Location: > https://hostname/jenkins/administrativeMonitor/hudson.diagnosis.ReverseProxySetupMonitor/testForReverseProxySetup/https%3A%2F%2Fhostname%2Fjenkins%2Fmanage/ > Content-Length: 0 > Connection: close > Content-Type: text/plain; charset=UTF-8 > > HTTP/1.1 404 Not Found > Date: Thu, 12 Mar 2015 08:57:52 GMT > Server: Apache/2.2.15 (CentOS) > Content-Length: 442 > Connection: close > Content-Type: text/html; charset=iso-8859-1 > > <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> > <html><head> > <title>404 Not Found</title> > </head><body> > <h1>Not Found</h1> > <p>The requested URL > /jenkins/administrativeMonitor/hudson.diagnosis.ReverseProxySetupMonitor/testForReverseProxySetup/ > https://hostname/jenkins/manage/ was not found on this server.</p> > <hr> > <address>Apache/2.2.15 (CentOS) Server at hostname Port 443</address> > </body></html> > > > > El jueves, 12 de marzo de 2015, 9:55:59 (UTC+1), Marcos Rey escribió: >> >> >> You are totally right, my bad. If I try the curl test, I get a 404 (as >> expected). >> >> El jueves, 12 de marzo de 2015, 9:47:08 (UTC+1), Daniel Beck escribió: >>> >>> That's why the curl command specifies a referer, something you don't >>> have if you just open that URL. >>> >>> On 12.03.2015, at 09:16, Marcos Rey <sole...@gmail.com> wrote: >>> >>> > If it helps, if i manually try the url: >>> https://hostname/jenkins/manage >>> https://hostname/jenkins/administrativeMonitor/hudson.diagnosis.ReverseProxySetupMonitor/test, >>> >>> tomcat returns this: >>> > >>> > HTTP 404 - https://hostname/jenkins/manage vs. NO-REFERER >>> > >>> > El jueves, 12 de marzo de 2015, 9:14:49 (UTC+1), Marcos Rey escribió: >>> > Thanks Rui, i would consider mod_ajp. The weird thing is that i have a >>> similar production deployment that does not have this issue. >>> > >>> > Mark, thanks for sharing your config, mine is quite similar, but I >>> still get the proxy reverse broken error. The weird thing is that >>> everything seems to be working fine, so I might skip this for the >>> meanwhile. Also, could you please verify that your installation passes the >>> 'curl' test? >>> > >>> > curl -iL -e https://hostname/jenkins/manage >>> https://hostname/jenkins/administrativeMonitor/hudson.diagnosis.ReverseProxySetupMonitor/test >>> >>> > >>> > Also, I'm using https... I'm not sure if that's what's causing the >>> issue. >>> > >>> > Thanks both for your help and for taking your time to answer. >>> > >>> > El jueves, 12 de marzo de 2015, 0:54:57 (UTC+1), Mark Eggers escribió: >>> > I've not seen this. >>> > >>> > For my Jenkins URL: >>> > >>> > http://[hostname]/jenkins/ >>> > >>> > In my uriworker.properties file: >>> > >>> > /jenkins|/*=[workername] >>> > >>> > Then in the Apache HTTPD host that manages Jenkins: >>> > >>> > JkMountFile conf.d/uriworkermap.properties >>> > >>> > There's a good base workers.properties configuration example in conf >>> subdirectory of the mod_jk source code. >>> > >>> > I'm running 1.602 on CentOS 6.6, Apache HTTPD 2.2.15-39, mo_jk 1.40, >>> Tomcat 7.0.57, and Oracle JRE 1.7.0_76 64 bit. I'm using the APR connector >>> (Tomcat native compiled and in Java library path). All my connectors are >>> set to UTF-8. >>> > >>> > . . . just my two cents >>> > /mde/ >>> > >>> > On Wednesday, March 11, 2015 at 2:25:13 PM UTC-7, Rui Fernando Hayashi >>> wrote: >>> > I've managed to solve that using mod_proxy_ajp. >>> > >>> > On Wed, Mar 11, 2015 at 7:37 AM, Marcos Rey <sole...@gmail.com> >>> wrote: >>> > Hello! >>> > >>> > I've been reading the messages around the list and I see that more >>> people see this message on 'Manage Jenkins' when running apache+mod_jk with >>> Jenkins. Any input would be greatly appreciated. >>> > >>> > Regards, >>> > >>> > >>> > >>> > >>> > -- >>> > You received this message because you are subscribed to the Google >>> Groups "Jenkins Users" group. >>> > To unsubscribe from this group and stop receiving emails from it, send >>> an email to jenkinsci-use...@googlegroups.com. >>> > To view this discussion on the web visit >>> https://groups.google.com/d/msgid/jenkinsci-users/c66b22b3-b92b-440b-be5c-97be4e2e2d40%40googlegroups.com. >>> >>> >>> > For more options, visit https://groups.google.com/d/optout. >>> > >>> > >>> > -- >>> > You received this message because you are subscribed to the Google >>> Groups "Jenkins Users" group. >>> > To unsubscribe from this group and stop receiving emails from it, send >>> an email to jenkinsci-use...@googlegroups.com. >>> > To view this discussion on the web visit >>> https://groups.google.com/d/msgid/jenkinsci-users/ce205e87-be25-4b28-b033-8c70268e0ecb%40googlegroups.com. >>> >>> >>> > For more options, visit https://groups.google.com/d/optout. >>> >>> -- You received this message because you are subscribed to the Google Groups "Jenkins Users" group. To unsubscribe from this group and stop receiving emails from it, send an email to jenkinsci-users+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/2958fdd1-709a-4594-ad07-49f09fde2656%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
