Paul has sent you an engineer's trick to create a stereo effect.  He's
obviously a top flight sound pro.  It isn't something I'd attempt using the
method he suggests and I've been editing audio for more than fifty years.
My hats off to him.  The way we did it was with something called a closed
loop.  You send the signal out through a mixer and then bring it back into
the recording.  The tiny difference creates somewhat of a stereo effect.
Paul suggests Reverb as a possibility and that too can help.
But in my opinion, none of those methods really creates stereo; just a poor
substitution.
 

JOHN AND LINDA JUSTICE
WITH GUIDE DOGS EDWIN AND CALYPSOE
PERSONAL E-MAIL: [email protected]

-----Original Message-----
From: JAWS-Users-List [mailto:[email protected]] On
Behalf Of Kevin
Sent: Saturday, December 31, 2016 6:27 PM
To: [email protected]
Subject: Re: [JAWS-Users] gold wave recordings

John

ok it's ok, I increased the volume using dynamics I think that was the
problem because I made a copy and increased the volume in the volume heading
it's fine now.
one thing is it possible to convert a mono recording to stereo?

-----Original Message-----
From: john_Justice
Sent: Saturday, December 31, 2016 1:13 PM
To: [email protected]
Subject: Re: [JAWS-Users] gold wave recordings

Kevin,
That effect is sometimes called "wave distortion".  It can be caused by
several factors and so I'm going to recommend that you try a few things to
isolate the issue and eliminate other causes of that distortion.
1. To make sure that the distortion isn't being caused by your computer's
sound card, plug in a set of headphones and then try experimenting with the
volume.

If you have a digital recorder such as Olympus, try transferring the file to
the recorder.  Then play it on there.  If the wave distortion doesn't
continue, then it's your sound card or amplifier.

There are many features available in Gold Wave which can change the way a
sound is heard by passing it through various filters.  First, make a copy of
the file.
Then, try filtering the sound using the Gold Wave  features.

Finally, a distortion like that might be a part of the original recording
but isn't as noticeable at lower volumes.  It is a given fact that when you
add more power to an output, you add more headroom giving the signal a
chance to distort.
Good luck.

JOHN AND LINDA JUSTICE
WITH GUIDE DOGS EDWIN AND CALYPSOE
PERSONAL E-MAIL: [email protected]

-----Original Message-----
From: JAWS-Users-List [mailto:[email protected]] On
Behalf Of Kevin
Sent: Saturday, December 31, 2016 1:26 PM
To: [email protected]
Subject: [JAWS-Users] goldwave recordings

does anyone know if it is possible to fix a goldwave recording.  my
recording is of a poem and it sounds fine when the volume is low, but if I
increase the volume the speech of the poem gets like bubbly.  it actually
sounds bubbly.
using jaws 18.0.2118 and windows 10 16 07 latest build.
Email is golden!!!
Kevin Lee
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/ 


For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/


For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/

Reply via email to