On Fri, May 8, 2015 at 3:32 PM, Leon Anavi <leon.an...@konsulko.com> wrote: > Hi Pedro, > > On 8.05.2015 14:59, pedro.quei...@elektrobit.com wrote: >> >> Hi all, >> I have started an attempt to build tizen ivi for the Renesas R-Car M2 ARM >> platform (Koelsch board), one of the goals would be to attempt graphics hw >> acceleration with the proprietary drivers.
Can you tell us about which driver set do you plan to use >> There are some instructions available in the wiki regarding using gbs. yes everything is there : https://wiki.tizen.org/wiki/Renesas >> Nevertheless I wonder whether someone did or is in the process going the >> same using yocto? Probably yes but nothing was shared in public ? wasnt it ? > Building Tizen:Common or any of the Tizen profiles based on it (like IVI) > for ARM using Yocto isn't easy task. In my opinion the Yocto recipes are not > perfect and you will have numerous challenges if you try to build them for > any devices with CPU different from Intel. Yes it still require efforts so ask for free or professional help here :) > Recently my colleagues and I have managed to build Tizen:Common with > hardware acceleration in Wayland/Weston for HummingBoard-i2eX using Yocto. I > am still working on improvements of the recipes. You can find all the > details at Tizen wiki: > https://wiki.tizen.org/wiki/HummingBoard AFAIK this is the 1st ARM device that fully support Tizen Yocto congratulation leon and your collegues , I knew you will manage to :) > Another very useful article is the tutorial from Samsung Open Source Group > about building Tizen:Common for Raspberry Pi 2 (without hardware > acceleration): > http://blogs.s-osg.org/bringing-tizen-to-a-raspberry-pi-2-near-you/ Any other boards candidates now ? I am considering Odroid C1 ... but time is missing _______________________________________________ IVI mailing list IVI@lists.tizen.org https://lists.tizen.org/listinfo/ivi
