We preassign some ports in a special bank via the new defined
banks_portmsk. Put it in the plat_data means it is not expected to be
adjusted dynamically.
If the iommu id in the iommu consumer's dtsi node is inside this
banks_portmsk, then we switch it to this special iommu bank, and
initialise the IOMMU bank HW.
Each bank has the independent pgtable(4GB iova range). Each bank
is a independent iommu domain/group. Currently we don't separate different
iova ranges inside a bank.
Signed-off-by: Yong Wu <yong...@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno
<angelogioacchino.delre...@collabora.com>
---
drivers/iommu/mtk_iommu.c | 55 ++++++++++++++++++++++++++++++++++-----
1 file changed, 48 insertions(+), 7 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 023bb7d3ffb2..5f3e88c44514 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -191,6 +191,7 @@ struct mtk_iommu_plat_data {
u8 banks_num;
bool banks_enable[MTK_IOMMU_BANK_MAX];
+ unsigned int banks_portmsk[MTK_IOMMU_BANK_MAX];
unsigned char larbid_remap[MTK_LARB_COM_MAX][MTK_LARB_SUBCOM_MAX];
};
@@ -467,6 +468,30 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static unsigned int mtk_iommu_get_bank_id(struct device *dev,
+ const struct mtk_iommu_plat_data
*plat_data)
+{
+ struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+ unsigned int i, portmsk = 0, bankid = 0;
+
+ if (plat_data->banks_num == 1)
+ return bankid;
+
+ for (i = 0; i < fwspec->num_ids; i++)
+ portmsk |= BIT(MTK_M4U_TO_PORT(fwspec->ids[i]));
+
+ for (i = 0; i < plat_data->banks_num && i < MTK_IOMMU_BANK_MAX; i++) {
+ if (!plat_data->banks_enable[i])
+ continue;
+
+ if (portmsk & plat_data->banks_portmsk[i]) {
+ bankid = i;
+ break;
+ }
+ }
+ return bankid; /* default is 0 */
+}
+
static int mtk_iommu_get_iova_region_id(struct device *dev,
const struct mtk_iommu_plat_data
*plat_data)
{
@@ -619,13 +644,14 @@ static int mtk_iommu_attach_device(struct iommu_domain
*domain,
struct list_head *hw_list = data->hw_list;
struct device *m4udev = data->dev;
struct mtk_iommu_bank_data *bank;
- unsigned int bankid = 0;
+ unsigned int bankid;
int ret, region_id;
region_id = mtk_iommu_get_iova_region_id(dev, data->plat_data);
if (region_id < 0)
return region_id;
+ bankid = mtk_iommu_get_bank_id(dev, data->plat_data);
mutex_lock(&dom->mutex);
if (!dom->bank) {
/* Data is in the frstdata in sharing pgtable case. */
@@ -797,27 +823,42 @@ static void mtk_iommu_release_device(struct device *dev)
iommu_fwspec_free(dev);
}
+static int mtk_iommu_get_group_id(struct device *dev, const struct
mtk_iommu_plat_data *plat_data)
+{
+ unsigned int bankid;
+
+ /*
+ * If the bank function is enabled, each bank is a iommu group/domain.
+ * Otherwise, each iova region is a iommu group/domain.
+ */
+ bankid = mtk_iommu_get_bank_id(dev, plat_data);
+ if (bankid)
+ return bankid;
+
+ return mtk_iommu_get_iova_region_id(dev, plat_data);
+}
+
static struct iommu_group *mtk_iommu_device_group(struct device *dev)
{
struct mtk_iommu_data *c_data = dev_iommu_priv_get(dev), *data;
struct list_head *hw_list = c_data->hw_list;
struct iommu_group *group;
- int regionid;
+ int groupid;
data = mtk_iommu_get_frst_data(hw_list);
if (!data)
return ERR_PTR(-ENODEV);
- regionid = mtk_iommu_get_iova_region_id(dev, data->plat_data);
- if (regionid < 0)
- return ERR_PTR(regionid);
+ groupid = mtk_iommu_get_group_id(dev, data->plat_data);
+ if (groupid < 0)
+ return ERR_PTR(groupid);
mutex_lock(&data->mutex);
- group = data->m4u_group[regionid];
+ group = data->m4u_group[groupid];
if (!group) {
group = iommu_group_alloc();
if (!IS_ERR(group))
- data->m4u_group[regionid] = group;
+ data->m4u_group[groupid] = group;
} else {
iommu_group_ref_get(group);
}
--
2.18.0
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
