On Tue, 29 Oct 2019 14:40:16 +0800
Zhangfei Gao <zhangfei....@linaro.org> wrote:
> Register qm to uacce framework for user crypto driver
>
> Signed-off-by: Zhangfei Gao <zhangfei....@linaro.org>
> Signed-off-by: Zhou Wang <wangzh...@hisilicon.com>
Hi.
This shows there is probably a race during setup that you should close.
Userspace interface is exposed before the driver is ready to handle it.
Few other bits inline.
Thanks,
Jonathan
> ---
> drivers/crypto/hisilicon/qm.c | 253
> ++++++++++++++++++++++++++++++--
> drivers/crypto/hisilicon/qm.h | 13 +-
> drivers/crypto/hisilicon/zip/zip_main.c | 39 ++---
> include/uapi/misc/uacce/qm.h | 23 +++
> 4 files changed, 292 insertions(+), 36 deletions(-)
> create mode 100644 include/uapi/misc/uacce/qm.h
>
> diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
> index a8ed6990..4b9cced 100644
> --- a/drivers/crypto/hisilicon/qm.c
> +++ b/drivers/crypto/hisilicon/qm.c
> @@ -9,6 +9,9 @@
> #include <linux/log2.h>
> #include <linux/seq_file.h>
> #include <linux/slab.h>
> +#include <linux/uacce.h>
> +#include <linux/uaccess.h>
> +#include <uapi/misc/uacce/qm.h>
> #include "qm.h"
>
> /* eq/aeq irq enable */
> @@ -465,17 +468,22 @@ static void qm_cq_head_update(struct hisi_qp *qp)
>
> static void qm_poll_qp(struct hisi_qp *qp, struct hisi_qm *qm)
> {
> - struct qm_cqe *cqe = qp->cqe + qp->qp_status.cq_head;
> -
> - if (qp->req_cb) {
> - while (QM_CQE_PHASE(cqe) == qp->qp_status.cqc_phase) {
> - dma_rmb();
> - qp->req_cb(qp, qp->sqe + qm->sqe_size * cqe->sq_head);
> - qm_cq_head_update(qp);
> - cqe = qp->cqe + qp->qp_status.cq_head;
> - qm_db(qm, qp->qp_id, QM_DOORBELL_CMD_CQ,
> - qp->qp_status.cq_head, 0);
> - atomic_dec(&qp->qp_status.used);
> + struct qm_cqe *cqe;
> +
> + if (qp->event_cb) {
> + qp->event_cb(qp);
> + } else {
> + cqe = qp->cqe + qp->qp_status.cq_head;
> +
> + if (qp->req_cb) {
> + while (QM_CQE_PHASE(cqe) == qp->qp_status.cqc_phase) {
> + dma_rmb();
> + qp->req_cb(qp, qp->sqe + qm->sqe_size *
> + cqe->sq_head);
> + qm_cq_head_update(qp);
> + cqe = qp->cqe + qp->qp_status.cq_head;
> + atomic_dec(&qp->qp_status.used);
> + }
> }
>
> /* set c_flag */
> @@ -1397,6 +1405,220 @@ static void hisi_qm_cache_wb(struct hisi_qm *qm)
> }
> }
>
> +static void qm_qp_event_notifier(struct hisi_qp *qp)
> +{
> + wake_up_interruptible(&qp->uacce_q->wait);
> +}
> +
> +static int hisi_qm_get_available_instances(struct uacce_device *uacce)
> +{
> + int i, ret;
> + struct hisi_qm *qm = uacce->priv;
> +
> + read_lock(&qm->qps_lock);
> + for (i = 0, ret = 0; i < qm->qp_num; i++)
> + if (!qm->qp_array[i])
> + ret++;
> + read_unlock(&qm->qps_lock);
> +
> + return ret;
> +}
> +
> +static int hisi_qm_uacce_get_queue(struct uacce_device *uacce,
> + unsigned long arg,
> + struct uacce_queue *q)
> +{
> + struct hisi_qm *qm = uacce->priv;
> + struct hisi_qp *qp;
> + u8 alg_type = 0;
> +
> + qp = hisi_qm_create_qp(qm, alg_type);
> + if (IS_ERR(qp))
> + return PTR_ERR(qp);
> +
> + q->priv = qp;
> + q->uacce = uacce;
> + qp->uacce_q = q;
> + qp->event_cb = qm_qp_event_notifier;
> + qp->pasid = arg;
> +
> + return 0;
> +}
> +
> +static void hisi_qm_uacce_put_queue(struct uacce_queue *q)
> +{
> + struct hisi_qp *qp = q->priv;
> +
> + /*
> + * As put_queue is only called in uacce_mode=1, and only one queue can
We got rid of the modes I think so comment needs an update.
> + * be used in this mode. we flush all sqc cache back in put queue.
> + */
> + hisi_qm_cache_wb(qp->qm);
> +
> + /* need to stop hardware, but can not support in v1 */
> + hisi_qm_release_qp(qp);
Should we just drop support for the v1 hardware if we can't do this?
> +}
> +
> +/* map sq/cq/doorbell to user space */
> +static int hisi_qm_uacce_mmap(struct uacce_queue *q,
> + struct vm_area_struct *vma,
> + struct uacce_qfile_region *qfr)
> +{
> + struct hisi_qp *qp = q->priv;
> + struct hisi_qm *qm = qp->qm;
> + size_t sz = vma->vm_end - vma->vm_start;
> + struct pci_dev *pdev = qm->pdev;
> + struct device *dev = &pdev->dev;
> + unsigned long vm_pgoff;
> + int ret;
> +
> + switch (qfr->type) {
> + case UACCE_QFRT_MMIO:
> + if (qm->ver == QM_HW_V2) {
> + if (sz > PAGE_SIZE * (QM_DOORBELL_PAGE_NR +
> + QM_DOORBELL_SQ_CQ_BASE_V2 / PAGE_SIZE))
> + return -EINVAL;
> + } else {
> + if (sz > PAGE_SIZE * QM_DOORBELL_PAGE_NR)
> + return -EINVAL;
> + }
> +
> + vma->vm_flags |= VM_IO;
> +
> + return remap_pfn_range(vma, vma->vm_start,
> + qm->phys_base >> PAGE_SHIFT,
> + sz, pgprot_noncached(vma->vm_page_prot));
> + case UACCE_QFRT_DUS:
> + if (sz != qp->qdma.size)
> + return -EINVAL;
> +
Comment style in here is inconsistent. Match the existing code.
> + /* dma_mmap_coherent() requires vm_pgoff as 0
> + * restore vm_pfoff to initial value for mmap()
> + */
> + vm_pgoff = vma->vm_pgoff;
> + vma->vm_pgoff = 0;
> + ret = dma_mmap_coherent(dev, vma, qp->qdma.va,
> + qp->qdma.dma, sz);
> + vma->vm_pgoff = vm_pgoff;
> + return ret;
> +
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int hisi_qm_uacce_start_queue(struct uacce_queue *q)
> +{
> + struct hisi_qp *qp = q->priv;
> +
> + return hisi_qm_start_qp(qp, qp->pasid);
> +}
> +
> +static void hisi_qm_uacce_stop_queue(struct uacce_queue *q)
> +{
> + struct hisi_qp *qp = q->priv;
> +
> + hisi_qm_stop_qp(qp);
I'm a great fan of minimalism on these
hisi_qm_stop_qp(q->priv); doesn't really loose any clarity.
> +}
> +
> +static int qm_set_sqctype(struct uacce_queue *q, u16 type)
> +{
> + struct hisi_qm *qm = q->uacce->priv;
> + struct hisi_qp *qp = q->priv;
> +
> + write_lock(&qm->qps_lock);
> + qp->alg_type = type;
> + write_unlock(&qm->qps_lock);
> +
> + return 0;
> +}
> +
> +static long hisi_qm_uacce_ioctl(struct uacce_queue *q, unsigned int cmd,
> + unsigned long arg)
> +{
> + struct hisi_qp *qp = q->priv;
> + struct hisi_qp_ctx qp_ctx;
> +
> + if (cmd == UACCE_CMD_QM_SET_QP_CTX) {
> + if (copy_from_user(&qp_ctx, (void __user *)arg,
> + sizeof(struct hisi_qp_ctx)))
> + return -EFAULT;
> +
> + if (qp_ctx.qc_type != 0 && qp_ctx.qc_type != 1)
> + return -EINVAL;
> +
> + qm_set_sqctype(q, qp_ctx.qc_type);
> + qp_ctx.id = qp->qp_id;
> +
> + if (copy_to_user((void __user *)arg, &qp_ctx,
> + sizeof(struct hisi_qp_ctx)))
> + return -EFAULT;
> + } else {
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static struct uacce_ops uacce_qm_ops = {
> + .get_available_instances = hisi_qm_get_available_instances,
> + .get_queue = hisi_qm_uacce_get_queue,
> + .put_queue = hisi_qm_uacce_put_queue,
> + .start_queue = hisi_qm_uacce_start_queue,
> + .stop_queue = hisi_qm_uacce_stop_queue,
> + .mmap = hisi_qm_uacce_mmap,
> + .ioctl = hisi_qm_uacce_ioctl,
> +};
> +
> +static int qm_register_uacce(struct hisi_qm *qm)
> +{
> + struct pci_dev *pdev = qm->pdev;
> + struct uacce_device *uacce;
> + unsigned long mmio_page_nr;
> + unsigned long dus_page_nr;
> + struct uacce_interface interface = {
> + .flags = UACCE_DEV_SVA,
> + .ops = &uacce_qm_ops,
> + };
> +
> + strncpy(interface.name, pdev->driver->name, sizeof(interface.name));
> +
> + uacce = uacce_register(&pdev->dev, &interface);
> + if (IS_ERR(uacce))
> + return PTR_ERR(uacce);
Is there a potential race here as we have exposed the character device before
the driver is ready for it to be used? Probably need to split the code that
allocates a uacce interface from the bit that actually exposes it to userspace.
> +
> + if (uacce->flags & UACCE_DEV_SVA) {
> + qm->use_sva = true;
> + } else {
> + /* only consider sva case */
> + uacce_unregister(uacce);
> + return -EINVAL;
> + }
> +
> + uacce->is_vf = pdev->is_virtfn;
> + uacce->priv = qm;
> + uacce->algs = qm->algs;
> +
> + if (qm->ver == QM_HW_V1) {
> + mmio_page_nr = QM_DOORBELL_PAGE_NR;
> + uacce->api_ver = HISI_QM_API_VER_BASE;
> + } else {
> + mmio_page_nr = QM_DOORBELL_PAGE_NR +
> + QM_DOORBELL_SQ_CQ_BASE_V2 / PAGE_SIZE;
> + uacce->api_ver = HISI_QM_API_VER2_BASE;
> + }
> +
> + dus_page_nr = (PAGE_SIZE - 1 + qm->sqe_size * QM_Q_DEPTH +
> + sizeof(struct qm_cqe) * QM_Q_DEPTH) >> PAGE_SHIFT;
> +
> + uacce->qf_pg_size[UACCE_QFRT_MMIO] = mmio_page_nr;
> + uacce->qf_pg_size[UACCE_QFRT_DUS] = dus_page_nr;
> +
> + qm->uacce = uacce;
> +
> + return 0;
> +}
> +
> /**
> * hisi_qm_init() - Initialize configures about qm.
> * @qm: The qm needing init.
> @@ -1421,6 +1643,10 @@ int hisi_qm_init(struct hisi_qm *qm)
> return -EINVAL;
> }
>
> + ret = qm_register_uacce(qm);
> + if (ret < 0)
> + dev_warn(&pdev->dev, "fail to register uacce (%d)\n", ret);
> +
looks like there are error paths in qm_init in which we should call
the uacce_unregister?
> ret = pci_enable_device_mem(pdev);
> if (ret < 0) {
> dev_err(&pdev->dev, "Failed to enable device mem!\n");
> @@ -1433,6 +1659,8 @@ int hisi_qm_init(struct hisi_qm *qm)
> goto err_disable_pcidev;
> }
>
> + qm->phys_base = pci_resource_start(pdev, PCI_BAR_2);
> + qm->size = pci_resource_len(qm->pdev, PCI_BAR_2);
> qm->io_base = ioremap(pci_resource_start(pdev, PCI_BAR_2),
> pci_resource_len(qm->pdev, PCI_BAR_2));
Use qm->phys_base/size in the ioremap here to avoid repeating the code.
> if (!qm->io_base) {
> @@ -1504,6 +1732,9 @@ void hisi_qm_uninit(struct hisi_qm *qm)
> iounmap(qm->io_base);
> pci_release_mem_regions(pdev);
> pci_disable_device(pdev);
> +
> + if (qm->uacce)
> + uacce_unregister(qm->uacce);
Can we make uacce_unregister check the input?
Might make for cleaner users.
> }
> EXPORT_SYMBOL_GPL(hisi_qm_uninit);
>
> diff --git a/drivers/crypto/hisilicon/qm.h b/drivers/crypto/hisilicon/qm.h
> index 103e2fd..84a3be9 100644
> --- a/drivers/crypto/hisilicon/qm.h
> +++ b/drivers/crypto/hisilicon/qm.h
> @@ -77,6 +77,10 @@
>
> #define HISI_ACC_SGL_SGE_NR_MAX 255
>
> +/* page number for queue file region */
> +#define QM_DOORBELL_PAGE_NR 1
> +
1 blank line only is almost always enough.
> +
> enum qp_state {
> QP_STOP,
> };
> @@ -161,7 +165,12 @@ struct hisi_qm {
> u32 error_mask;
> u32 msi_mask;
>
> + const char *algs;
> bool use_dma_api;
> + bool use_sva;
> + resource_size_t phys_base;
> + resource_size_t size;
> + struct uacce_device *uacce;
> };
>
> struct hisi_qp_status {
> @@ -191,10 +200,12 @@ struct hisi_qp {
> struct hisi_qp_ops *hw_ops;
> void *qp_ctx;
> void (*req_cb)(struct hisi_qp *qp, void *data);
> + void (*event_cb)(struct hisi_qp *qp);
> struct work_struct work;
> struct workqueue_struct *wq;
> -
unrelated change.
> struct hisi_qm *qm;
> + u16 pasid;
> + struct uacce_queue *uacce_q;
> };
>
> int hisi_qm_init(struct hisi_qm *qm);
> diff --git a/drivers/crypto/hisilicon/zip/zip_main.c
> b/drivers/crypto/hisilicon/zip/zip_main.c
> index 1b2ee96..48860d2 100644
> --- a/drivers/crypto/hisilicon/zip/zip_main.c
> +++ b/drivers/crypto/hisilicon/zip/zip_main.c
> @@ -316,8 +316,14 @@ static void hisi_zip_set_user_domain_and_cache(struct
> hisi_zip *hisi_zip)
> writel(AXUSER_BASE, base + HZIP_BD_RUSER_32_63);
> writel(AXUSER_BASE, base + HZIP_SGL_RUSER_32_63);
> writel(AXUSER_BASE, base + HZIP_BD_WUSER_32_63);
> - writel(AXUSER_BASE, base + HZIP_DATA_RUSER_32_63);
> - writel(AXUSER_BASE, base + HZIP_DATA_WUSER_32_63);
> +
> + if (hisi_zip->qm.use_sva) {
> + writel(AXUSER_BASE | AXUSER_SSV, base + HZIP_DATA_RUSER_32_63);
> + writel(AXUSER_BASE | AXUSER_SSV, base + HZIP_DATA_WUSER_32_63);
> + } else {
> + writel(AXUSER_BASE, base + HZIP_DATA_RUSER_32_63);
> + writel(AXUSER_BASE, base + HZIP_DATA_WUSER_32_63);
> + }
>
> /* let's open all compression/decompression cores */
> writel(DECOMP_CHECK_ENABLE | ALL_COMP_DECOMP_EN,
> @@ -671,24 +677,12 @@ static int hisi_zip_probe(struct pci_dev *pdev, const
> struct pci_device_id *id)
> qm = &hisi_zip->qm;
> qm->pdev = pdev;
> qm->ver = rev_id;
> -
Try to avoid noise from white space changes. No huge help to delete the blank
line here.
> + qm->use_dma_api = true;
> + qm->algs = "zlib\ngzip\n";
> qm->sqe_size = HZIP_SQE_SIZE;
> qm->dev_name = hisi_zip_name;
> qm->fun_type = (pdev->device == PCI_DEVICE_ID_ZIP_PF) ? QM_HW_PF :
> QM_HW_VF;
Unrelated changes I think. Can we clean out the old left overs
of uacce from the driver in a precursor patch? Also if it's no longer
used can we drop the module param?
> - switch (uacce_mode) {
> - case 0:
> - qm->use_dma_api = true;
> - break;
> - case 1:
> - qm->use_dma_api = false;
> - break;
> - case 2:
> - qm->use_dma_api = true;
> - break;
> - default:
> - return -EINVAL;
> - }
>
> ret = hisi_qm_init(qm);
> if (ret) {
> @@ -976,12 +970,10 @@ static int __init hisi_zip_init(void)
> goto err_pci;
> }
>
> - if (uacce_mode == 0 || uacce_mode == 2) {
> - ret = hisi_zip_register_to_crypto();
> - if (ret < 0) {
> - pr_err("Failed to register driver to crypto.\n");
> - goto err_crypto;
> - }
> + ret = hisi_zip_register_to_crypto();
> + if (ret < 0) {
> + pr_err("Failed to register driver to crypto.\n");
> + goto err_crypto;
> }
>
> return 0;
> @@ -996,8 +988,7 @@ static int __init hisi_zip_init(void)
>
> static void __exit hisi_zip_exit(void)
> {
> - if (uacce_mode == 0 || uacce_mode == 2)
> - hisi_zip_unregister_from_crypto();
> + hisi_zip_unregister_from_crypto();
> pci_unregister_driver(&hisi_zip_pci_driver);
> hisi_zip_unregister_debugfs();
> }
> diff --git a/include/uapi/misc/uacce/qm.h b/include/uapi/misc/uacce/qm.h
> new file mode 100644
> index 0000000..d79a8f2
> --- /dev/null
> +++ b/include/uapi/misc/uacce/qm.h
Given generic directory (assuming uacce becomes heavily used) probably
want to prefix that if it is unique to hisilicon.
hisi_qm.h?
> @@ -0,0 +1,23 @@
> +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
> +#ifndef HISI_QM_USR_IF_H
> +#define HISI_QM_USR_IF_H
> +
> +#include <linux/types.h>
> +
> +/**
> + * struct hisi_qp_ctx - User data for hisi qp.
> + * @id: Specifies which Turbo decode algorithm to use
What's a Turbo algorithm? I don't know and I have the manuals ;)
> + * @qc_type: Accelerator algorithm type
> + */
> +struct hisi_qp_ctx {
> + __u16 id;
> + __u16 qc_type;
> +};
> +
> +#define HISI_QM_API_VER_BASE "hisi_qm_v1"
> +#define HISI_QM_API_VER2_BASE "hisi_qm_v2"
> +
> +/* UACCE_CMD_QM_SET_QP_CTX: Set qp algorithm type */
> +#define UACCE_CMD_QM_SET_QP_CTX _IOWR('H', 10, struct hisi_qp_ctx)
> +
> +#endif
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu
