On 2/6/2025 6:13 AM, Stephen Hemminger wrote:
On Wed, 5 Feb 2025 12:36:31 +0200
"Lifshits, Vitaly" <vitaly.lifsh...@intel.com> wrote:
On 1/31/2025 3:21 AM, Stephen Hemminger wrote:
On Thu, 30 Jan 2025 21:17:30 +0200
"Lifshits, Vitaly" <vitaly.lifsh...@intel.com> wrote:
On 1/30/2025 7:11 PM, Stephen Hemminger wrote:
I am using:
5a:00.0 Ethernet controller: Intel Corporation Ethernet Controller I226-LM (rev
04)
Subsystem: Intel Corporation Device 0000
Flags: bus master, fast devsel, latency 0, IRQ 19, IOMMU group 20
Memory at 6c500000 (32-bit, non-prefetchable) [size=1M]
Memory at 6c600000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
Capabilities: [70] MSI-X: Enable+ Count=5 Masked-
Capabilities: [a0] Express Endpoint, IntMsgNum 0
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 58-47-ca-ff-ff-7a-98-3d
Capabilities: [1c0] Latency Tolerance Reporting
Capabilities: [1f0] Precision Time Measurement
Capabilities: [1e0] L1 PM Substates
Kernel driver in use: igc
Kernel modules: igc
Using both Debian testing and my own kernel built from 6.12, the igc
driver appears broken after resume.
From which system state are you resuming?
After resuming the device is down and no address present.
Attempts to set link up manually fail.
Did you get any errors in the dmesg log?
What is the firmware version on your device (you can get it by running
ethtool -i)?
If I do rmmod/modprobe of igc it comes back.
Doing a bit of bisectting but it is slow going.
Meanwhile, we'll also try to reproduce this issue in our lab. Could you
share more details about your system so we can create a similar setup?
Given that error reported is -ENODEV, might be a generic netdev problem not
just for igc device.
We weren't able to reproduce this issue on our systems, even though we
tried several suspend-resume cycles on different kernels and different
systems.
However, a few days ago we received a comment in a BZ about an issue
similar to yours. In there adding a short delay in igc_resume function
https://bugzilla.kernel.org/show_bug.cgi?id=219143
https://bugzilla.kernel.org/show_bug.cgi?id=219143#c123
Can you try to see if it fixes your issue as well?
I tried the proposed delay and it had no impact.
Any idea of other things to instrument?
Has the adapter worked with a different kernel? Can you try to reproduce
the issue over kernel 6.9?
Is the LAN cable connected to the igc adapter? Does it maintain link
during suspend?
Also, I saw that on your board you have three more adapters, I assume
that enp2s0f0np0 and enp2s0f0np1 are i40e adapters. Does this issue also
happen to enp87s0?
