From: "Dr. David Alan Gilbert" <li...@treblig.org>
i40e_blink_phy_link_led() was added in 2016 by
commit fd077cd3399b ("i40e: Add functions to blink led on 10GBaseT PHY")
but hasn't been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <li...@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.pura...@broadcom.com>
---
drivers/net/ethernet/intel/i40e/i40e_common.c | 74 -------------------
.../net/ethernet/intel/i40e/i40e_prototype.h | 4 -
2 files changed, 78 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c
b/drivers/net/ethernet/intel/i40e/i40e_common.c
index 47e71f72d87b..ba780a949a47 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -4428,80 +4428,6 @@ u8 i40e_get_phy_address(struct i40e_hw *hw, u8 dev_num)
return (u8)(reg_val >> ((dev_num + 1) * 5)) & 0x1f;
}
-/**
- * i40e_blink_phy_link_led
- * @hw: pointer to the HW structure
- * @time: time how long led will blinks in secs
- * @interval: gap between LED on and off in msecs
- *
- * Blinks PHY link LED
- **/
-int i40e_blink_phy_link_led(struct i40e_hw *hw,
- u32 time, u32 interval)
-{
- u16 led_addr = I40E_PHY_LED_PROV_REG_1;
- u16 gpio_led_port;
- u8 phy_addr = 0;
- int status = 0;
- u16 led_ctl;
- u8 port_num;
- u16 led_reg;
- u32 i;
-
- i = rd32(hw, I40E_PFGEN_PORTNUM);
- port_num = (u8)(i & I40E_PFGEN_PORTNUM_PORT_NUM_MASK);
- phy_addr = i40e_get_phy_address(hw, port_num);
-
- for (gpio_led_port = 0; gpio_led_port < 3; gpio_led_port++,
- led_addr++) {
- status = i40e_read_phy_register_clause45(hw,
- I40E_PHY_COM_REG_PAGE,
- led_addr, phy_addr,
- &led_reg);
- if (status)
- goto phy_blinking_end;
- led_ctl = led_reg;
- if (led_reg & I40E_PHY_LED_LINK_MODE_MASK) {
- led_reg = 0;
- status = i40e_write_phy_register_clause45(hw,
- I40E_PHY_COM_REG_PAGE,
- led_addr, phy_addr,
- led_reg);
- if (status)
- goto phy_blinking_end;
- break;
- }
- }
-
- if (time > 0 && interval > 0) {
- for (i = 0; i < time * 1000; i += interval) {
- status = i40e_read_phy_register_clause45(hw,
- I40E_PHY_COM_REG_PAGE,
- led_addr, phy_addr, &led_reg);
- if (status)
- goto restore_config;
- if (led_reg & I40E_PHY_LED_MANUAL_ON)
- led_reg = 0;
- else
- led_reg = I40E_PHY_LED_MANUAL_ON;
- status = i40e_write_phy_register_clause45(hw,
- I40E_PHY_COM_REG_PAGE,
- led_addr, phy_addr, led_reg);
- if (status)
- goto restore_config;
- msleep(interval);
- }
- }
-
-restore_config:
- status = i40e_write_phy_register_clause45(hw,
- I40E_PHY_COM_REG_PAGE,
- led_addr, phy_addr, led_ctl);
-
-phy_blinking_end:
- return status;
-}
-
/**
* i40e_led_get_reg - read LED register
* @hw: pointer to the HW structure
diff --git a/drivers/net/ethernet/intel/i40e/i40e_prototype.h
b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
index 29f6a903a30c..c0a4bd53501c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_prototype.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
@@ -72,8 +72,6 @@ int i40e_led_set_phy(struct i40e_hw *hw, bool on,
u16 led_addr, u32 mode);
int i40e_led_get_phy(struct i40e_hw *hw, u16 *led_addr,
u16 *val);
-int i40e_blink_phy_link_led(struct i40e_hw *hw,
- u32 time, u32 interval);
/* admin send queue commands */
@@ -446,8 +444,6 @@ int i40e_read_phy_register(struct i40e_hw *hw, u8 page, u16
reg,
int i40e_write_phy_register(struct i40e_hw *hw, u8 page, u16 reg,
u8 phy_addr, u16 value);
u8 i40e_get_phy_address(struct i40e_hw *hw, u8 dev_num);
-int i40e_blink_phy_link_led(struct i40e_hw *hw,
- u32 time, u32 interval);
int i40e_aq_write_ddp(struct i40e_hw *hw, void *buff,
u16 buff_size, u32 track_id,
u32 *error_offset, u32 *error_info,
--
2.47.1
