ptp4l application reports too high offset when ran on E823 device
with a 100GB/s link. Those values cannot go under 100ns, like in a
PTP working case when using 100 GB/s cable.
This is due to incorrect frequency settings on the PHY clocks for
100 GB/s speed. Changes are introduced to align with the internal
hardware documentation, and correctly initialize frequency in PHY
clocks with the frequency values that are in our HW spec.
To reproduce the issue run ptp4l as a Time Receiver on E823 device,
and observe the offset, which will never approach values seen
in the PTP working case.
Fixes: 3a7496234d17 ("ice: implement basic E822 PTP support")
Reviewed-by: Milena Olech <milena.ol...@intel.com>
Signed-off-by: Przemyslaw Korba <przemyslaw.ko...@intel.com>
---
drivers/net/ethernet/intel/ice/ice_ptp_consts.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_consts.h
b/drivers/net/ethernet/intel/ice/ice_ptp_consts.h
index 6620642077bb..bdb1020147d1 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp_consts.h
+++ b/drivers/net/ethernet/intel/ice/ice_ptp_consts.h
@@ -761,9 +761,9 @@ const struct ice_vernier_info_e82x
e822_vernier[NUM_ICE_PTP_LNK_SPD] = {
/* rx_desk_rsgb_par */
644531250, /* 644.53125 MHz Reed Solomon gearbox */
/* tx_desk_rsgb_pcs */
- 644531250, /* 644.53125 MHz Reed Solomon gearbox */
+ 390625000, /* 390.625 MHz Reed Solomon gearbox */
/* rx_desk_rsgb_pcs */
- 644531250, /* 644.53125 MHz Reed Solomon gearbox */
+ 390625000, /* 390.625 MHz Reed Solomon gearbox */
/* tx_fixed_delay */
1620,
/* pmd_adj_divisor */
base-commit: 6ef5f61a4aa7d4df94a855a44f996bff08b0be83
--
2.31.1
