On Fri, Apr 26, 2024 at 4:30 PM Corinna Vinschen <vinsc...@redhat.com> wrote:
>
> Hi Eric,
>
> On Apr 23 16:10, Eric Dumazet wrote:
> > On Tue, Apr 23, 2024 at 3:47 PM Corinna Vinschen <vinsc...@redhat.com>
> > wrote:
> > >
> > > From: Paolo Abeni <pab...@redhat.com>
> > >
> > > Sabrina reports that the igb driver does not cope well with large
> > > MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload
> > > corruption on TX.
> > >
> > > An easy reproducer is to run ssh to connect to the machine. With
> > > MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails.
> > >
> > > The root cause of the issue is that the driver does not take into
> > > account properly the (possibly large) shared info size when selecting
> > > the ring layout, and will try to fit two packets inside the same 4K
> > > page even when the 1st fraglist will trump over the 2nd head.
> > >
> > > Address the issue forcing the driver to fit a single packet per page,
> > > leaving there enough room to store the (currently) largest possible
> > > skb_shared_info.
> > >
> > > Fixes: 3948b05950fd ("net: introduce a config option to tweak
> > > MAX_SKB_FRAG")
> > > Reported-by: Jan Tluka <jtl...@redhat.com>
> > > Reported-by: Jirka Hladky <jhla...@redhat.com>
> > > Reported-by: Sabrina Dubroca <s...@queasysnail.net>
> > > Tested-by: Sabrina Dubroca <s...@queasysnail.net>
> > > Tested-by: Corinna Vinschen <vinsc...@redhat.com>
> > > Signed-off-by: Paolo Abeni <pab...@redhat.com>
> > > ---
> > > v2: fix subject, add a simple reproducer
> > >
> > > drivers/net/ethernet/intel/igb/igb_main.c | 1 +
> > > 1 file changed, 1 insertion(+)
> > >
> > > diff --git a/drivers/net/ethernet/intel/igb/igb_main.c
> > > b/drivers/net/ethernet/intel/igb/igb_main.c
> > > index a3f100769e39..22fb2c322bca 100644
> > > --- a/drivers/net/ethernet/intel/igb/igb_main.c
> > > +++ b/drivers/net/ethernet/intel/igb/igb_main.c
> > > @@ -4833,6 +4833,7 @@ static void igb_set_rx_buffer_len(struct
> > > igb_adapter *adapter,
> > >
> > > #if (PAGE_SIZE < 8192)
> > > if (adapter->max_frame_size > IGB_MAX_FRAME_BUILD_SKB ||
> > > + SKB_HEAD_ALIGN(adapter->max_frame_size) > (PAGE_SIZE / 2) ||
> >
> > I wonder if adding IGB_SKB_PAD would be needed ?
> >
> > adapter->max_frame_size does not seem to include it.
> >
> > I would try using all mtus between 1200 and 1280 to make sure this works.
>
> Erm... did you mean between 1500 and 1580 by any chance? 1200 doesn't
> really seem to make sense...
No, I meant 1200 to 1280 . IPv4 should accept these MTU .
1200 + 768 = 1968
1280 + 768 = 2048 (2 KB)
I am worried of some padding that would cross 2048 bytes boundary,
while SKB_HEAD_ALIGN(adapter->max_frame_size) could still be < 2048
>
> I tested this patch now with mtu 1500, 1540 and 1580 successfully.
>
> Either way, I'm just heading into vacation, so I guess I'll pick this up
> again when I'm back, unless Paolo takes another look during my absence.
>
I guess your patch is better than nothing, this can be refined if
necessary later.
