On 12/6/2023 16:07, Kurt Kanzenbach wrote:
Currently the driver accepts VLAN EtherType steering rules regardless of the configured mask. And things might fail silently or with confusing error messages to the user. The VLAN EtherType can only be matched by full mask. Therefore, add a check for that.For instance the following rule is invalid, but the driver accepts it and ignores the user specified mask: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \ | m 0x00ff action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | VLAN EtherType: 0x8100 mask: 0x0 | VLAN: 0x0 mask: 0xffff | User-defined: 0x0 mask: 0xffffffffffffffff | Action: Direct to queue 0 After: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \ | m 0x00ff action 0 |rmgr: Cannot insert RX class rule: Operation not supported Fixes: 2b477d057e33 ("igc: Integrate flex filter into ethtool ops") Suggested-by: Suman Ghosh <sum...@marvell.com> Signed-off-by: Kurt Kanzenbach <k...@linutronix.de> --- Note: This is a follow up of https://lore.kernel.org/netdev/20231201075043.7822-1-k...@linutronix.de/ and should apply to net-queue tree. drivers/net/ethernet/intel/igc/igc_ethtool.c | 8 ++++++++ 1 file changed, 8 insertions(+)
Tested-by: Naama Meir <naamax.m...@linux.intel.com>
