Not having much luck with the Distro forums on this issue so I thought I'd ask 
for advice here.

I've been running Ubuntu 14.04.4 for some time on Intel Core i5 GFX without any 
issues.  My display is HDMI from the PC to an Onkyo A/V receiver then to a Sony 
KDL-XBR6.

When I try a fresh install of 16.04.1, I get a display that blanks out for 3-5 
seconds at random times depending on what is being displayed at the time.  I 
also have small amouts of video noise that is random horizontal lines about 1 
pixel tall scattered through the page.

I noticed that 14.04.05 uses X server 1.17.2 and 16.04.1 uses 1.18.3.

When I do the command xrandr --verbose I see some small differences between 
14.04 and 16.04, but it's things like 2 digits displayed instead of 1.  i.e. 
60.0 vs. 60.00. I'm only concerned with 1080P HD.

I've tried this on different computers all with Intel GFX. same results.

This does not occur on other monitors or TVs.

I'd blame it on Sony and Onkyo if they didn't work so well with Windows, all 
versions, and Ubuntu all versions except 16.04.

It's almost like the auto detection software in the newest version of X is off 
just enough to make my display flaky.  Kind of like the old analog CRT TVs that 
were sensitive to small tweaks to the horizontal and vertical adjustments.

Any help would be appreciated.

                                          
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to