On Tue, Aug 09, 2016 at 05:04:10PM +0200, Maarten Lankhorst wrote:
> Signed-off-by: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vet...@ffwll.ch>
> ---
> drivers/gpu/drm/i915/intel_sdvo.c | 27 +++++++++++----------------
> 1 file changed, 11 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_sdvo.c
> b/drivers/gpu/drm/i915/intel_sdvo.c
> index 7c08d555f35d..74a7c6c9b974 100644
> --- a/drivers/gpu/drm/i915/intel_sdvo.c
> +++ b/drivers/gpu/drm/i915/intel_sdvo.c
> @@ -1003,24 +1003,22 @@ static bool intel_sdvo_write_infoframe(struct
> intel_sdvo *intel_sdvo,
> }
>
> static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo,
> - const struct drm_display_mode
> *adjusted_mode)
> + struct intel_crtc_state *pipe_config)
> {
> uint8_t sdvo_data[HDMI_INFOFRAME_SIZE(AVI)];
> - struct drm_crtc *crtc = intel_sdvo->base.base.crtc;
> - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> union hdmi_infoframe frame;
> int ret;
> ssize_t len;
>
> ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi,
> - adjusted_mode);
> +
> &pipe_config->base.adjusted_mode);
> if (ret < 0) {
> DRM_ERROR("couldn't fill AVI infoframe\n");
> return false;
> }
>
> if (intel_sdvo->rgb_quant_range_selectable) {
> - if (intel_crtc->config->limited_color_range)
> + if (pipe_config->limited_color_range)
> frame.avi.quantization_range =
> HDMI_QUANTIZATION_RANGE_LIMITED;
> else
> @@ -1199,18 +1197,15 @@ static void intel_sdvo_pre_enable(struct
> intel_encoder *intel_encoder,
> {
> struct drm_device *dev = intel_encoder->base.dev;
> struct drm_i915_private *dev_priv = to_i915(dev);
> - struct intel_crtc *crtc = to_intel_crtc(intel_encoder->base.crtc);
> - const struct drm_display_mode *adjusted_mode =
> &crtc->config->base.adjusted_mode;
> - struct drm_display_mode *mode = &crtc->config->base.mode;
> + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> + const struct drm_display_mode *adjusted_mode =
> &crtc_state->base.adjusted_mode;
> + struct drm_display_mode *mode = &crtc_state->base.mode;
> struct intel_sdvo *intel_sdvo = to_sdvo(intel_encoder);
> u32 sdvox;
> struct intel_sdvo_in_out_map in_out;
> struct intel_sdvo_dtd input_dtd, output_dtd;
> int rate;
>
> - if (!mode)
> - return;
> -
> /* First, set the input mapping for the first input to our controlled
> * output. This is only correct if we're a single-input device, in
> * which case the first input is the output from the appropriate SDVO
> @@ -1243,11 +1238,11 @@ static void intel_sdvo_pre_enable(struct
> intel_encoder *intel_encoder,
> if (!intel_sdvo_set_target_input(intel_sdvo))
> return;
>
> - if (crtc->config->has_hdmi_sink) {
> + if (crtc_state->has_hdmi_sink) {
> intel_sdvo_set_encode(intel_sdvo, SDVO_ENCODE_HDMI);
> intel_sdvo_set_colorimetry(intel_sdvo,
> SDVO_COLORIMETRY_RGB256);
> - intel_sdvo_set_avi_infoframe(intel_sdvo, adjusted_mode);
> + intel_sdvo_set_avi_infoframe(intel_sdvo, crtc_state);
> } else
> intel_sdvo_set_encode(intel_sdvo, SDVO_ENCODE_DVI);
>
> @@ -1263,7 +1258,7 @@ static void intel_sdvo_pre_enable(struct intel_encoder
> *intel_encoder,
> DRM_INFO("Setting input timings on %s failed\n",
> SDVO_NAME(intel_sdvo));
>
> - switch (crtc->config->pixel_multiplier) {
> + switch (crtc_state->pixel_multiplier) {
> default:
> WARN(1, "unknown pixel multiplier specified\n");
> case 1: rate = SDVO_CLOCK_RATE_MULT_1X; break;
> @@ -1278,7 +1273,7 @@ static void intel_sdvo_pre_enable(struct intel_encoder
> *intel_encoder,
> /* The real mode polarity is set by the SDVO commands, using
> * struct intel_sdvo_dtd. */
> sdvox = SDVO_VSYNC_ACTIVE_HIGH | SDVO_HSYNC_ACTIVE_HIGH;
> - if (!HAS_PCH_SPLIT(dev) && crtc->config->limited_color_range)
> + if (!HAS_PCH_SPLIT(dev) && crtc_state->limited_color_range)
> sdvox |= HDMI_COLOR_RANGE_16_235;
> if (INTEL_INFO(dev)->gen < 5)
> sdvox |= SDVO_BORDER_ENABLE;
> @@ -1304,7 +1299,7 @@ static void intel_sdvo_pre_enable(struct intel_encoder
> *intel_encoder,
> } else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) {
> /* done in crtc_mode_set as it lives inside the dpll register */
> } else {
> - sdvox |= (crtc->config->pixel_multiplier - 1)
> + sdvox |= (crtc_state->pixel_multiplier - 1)
> << SDVO_PORT_MULTIPLY_SHIFT;
> }
>
> --
> 2.7.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
