On Tue, Jul 19, 2016 at 07:43:56PM +0100, Dave Gordon wrote: > On 14/07/16 15:15, Daniel Vetter wrote: > > I forgot to remove these when reworking the firmware loading sequence > > last year. The new sequence is that we load firmware, and if it's not > > there we entirely (and permanently) fail dmc setup. > > > > Reported-by: Dave Gordon <david.s.gor...@intel.com> > > Signed-off-by: Daniel Vetter <daniel.vet...@intel.com> > > --- > > drivers/gpu/drm/i915/intel_csr.c | 7 ------- > > 1 file changed, 7 deletions(-) > > > > diff --git a/drivers/gpu/drm/i915/intel_csr.c > > b/drivers/gpu/drm/i915/intel_csr.c > > index c3b33a10c15c..1ea0e1f43397 100644 > > --- a/drivers/gpu/drm/i915/intel_csr.c > > +++ b/drivers/gpu/drm/i915/intel_csr.c > > @@ -32,13 +32,6 @@ > > * onwards to drive newly added DMC (Display microcontroller) in display > > * engine to save and restore the state of display engine when it enter > > into > > * low-power state and comes back to normal. > > - * > > - * Firmware loading status will be one of the below states: > > FW_UNINITIALIZED, > > - * FW_LOADED, FW_FAILED. > > - * > > - * Once the firmware is written into the registers status will be moved > > from > > - * FW_UNINITIALIZED to FW_LOADED and for any erroneous condition status > > will > > - * be moved to FW_FAILED. > > */ > > > > #define I915_CSR_KBL "i915/kbl_dmc_ver1_01.bin" > > LGTM. > > Reviewed-by: Dave Gordon <david.s.gor...@intel.com>
Applied, thanks for the review. -Daniel -- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx
