From: Tim Gore <tim.g...@intel.com>
This patch applies WaMediaPoolStateCmdInWABB which fixes
a problem with the restoration of thread counts on resuming
from RC6.
Signed-off-by: Tim Gore <tim.g...@intel.com>
---
drivers/gpu/drm/i915/intel_lrc.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
index 676b532..017b25c 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -1296,6 +1296,31 @@ static int gen9_init_indirectctx_bb(struct
intel_engine_cs *engine,
wa_ctx_emit(batch, index, 0);
wa_ctx_emit(batch, index, 0);
}
+
+ /* WaMediaPoolStateCmdInWABB:bxt */
+ if (HAS_POOLED_EU(engine->i915)) {
+ /*
+ * EU pool configuration is setup along with golden context
+ * during context initialization. This value depends on
+ * device type (2x6 or 3x6) and needs to be updated based
+ * on which subslice is disabled especially for 2x6
+ * devices, however it is safe to load default
+ * configuration of 3x6 device instead of masking off
+ * corresponding bits because HW ignores bits of a disabled
+ * subslice and drops down to appropriate config. Please
+ * see render_state_setup() in i915_gem_render_state.c for
+ * possible configurations, to avoid duplication they are
+ * not shown here again.
+ */
+ u32 eu_pool_config = 0x00777000;
+ wa_ctx_emit(batch, index, GEN9_MEDIA_POOL_STATE);
+ wa_ctx_emit(batch, index, GEN9_MEDIA_POOL_ENABLE);
+ wa_ctx_emit(batch, index, eu_pool_config);
+ wa_ctx_emit(batch, index, 0);
+ wa_ctx_emit(batch, index, 0);
+ wa_ctx_emit(batch, index, 0);
+ }
+
/* Pad to end of cacheline */
while (index % CACHELINE_DWORDS)
wa_ctx_emit(batch, index, MI_NOOP);
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
