From: Tvrtko Ursulin <tvrtko.ursu...@intel.com>

usleep_range is not recommended for waits shorten than 10us.

Make the wait_for_us use the atomic variant for such waits.

To do so we need to reimplement the _wait_for_atomic macro to
be safe with regards to preemption and interrupts.

v2: Reimplement _wait_for_atomic to be irq and preemption safe.
    (Chris Wilson and Imre Deak)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursu...@intel.com>
Cc: Chris Wilson <ch...@chris-wilson.co.uk>
Cc: Imre Deak <imre.d...@intel.com>
Cc: Mika Kuoppala <mika.kuopp...@intel.com>
---
 drivers/gpu/drm/i915/intel_drv.h | 46 ++++++++++++++++++++++++++++------------
 1 file changed, 32 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 3156d8df7921..a200fd2be908 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -69,7 +69,6 @@
 })
 
 #define wait_for(COND, MS)             _wait_for((COND), (MS) * 1000, 1000)
-#define wait_for_us(COND, US)          _wait_for((COND), (US), 1)
 
 /* If CONFIG_PREEMPT_COUNT is disabled, in_atomic() always reports false. */
 #if defined(CONFIG_DRM_I915_DEBUG) && defined(CONFIG_PREEMPT_COUNT)
@@ -78,25 +77,44 @@
 # define _WAIT_FOR_ATOMIC_CHECK do { } while (0)
 #endif
 
-#define _wait_for_atomic(COND, US) ({ \
-       unsigned long end__; \
-       int ret__ = 0; \
+#define _wait_for_atomic(COND, US) \
+({ \
+       int cpu, ret, timeout = (US) * 1000; \
+       u64 base; \
        _WAIT_FOR_ATOMIC_CHECK; \
        BUILD_BUG_ON((US) > 50000); \
-       end__ = (local_clock() >> 10) + (US) + 1; \
-       while (!(COND)) { \
-               if (time_after((unsigned long)(local_clock() >> 10), end__)) { \
-                       /* Unlike the regular wait_for(), this atomic variant \
-                        * cannot be preempted (and we'll just ignore the issue\
-                        * of irq interruptions) and so we know that no time \
-                        * has passed since the last check of COND and can \
-                        * immediately report the timeout. \
-                        */ \
-                       ret__ = -ETIMEDOUT; \
+       preempt_disable(); \
+       cpu = smp_processor_id(); \
+       base = local_clock(); \
+       for (;;) { \
+               u64 now = local_clock(); \
+               preempt_enable(); \
+               if (COND) { \
+                       ret = 0; \
+                       break; \
+               } \
+               if (now - base >= timeout) { \
+                       ret = -ETIMEDOUT; \
                        break; \
                } \
                cpu_relax(); \
+               preempt_disable(); \
+               if (unlikely(cpu != smp_processor_id())) { \
+                       timeout -= now - base; \
+                       cpu = smp_processor_id(); \
+                       base = local_clock(); \
+               } \
        } \
+       ret; \
+})
+
+#define wait_for_us(COND, US) \
+({ \
+       int ret__; \
+       if ((US) > 10) \
+               ret__ = _wait_for((COND), (US), 10); \
+       else \
+               ret__ = _wait_for_atomic((COND), (US)); \
        ret__; \
 })
 
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to