On Tue, May 17, 2016 at 03:07:57PM +0200, Maarten Lankhorst wrote:
> With the removal of cs support this is no longer reachable.
> Can be revived if needed.
>
> Signed-off-by: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
Reviewed-by: Patrik Jakobsson <patrik.jakobs...@linux.intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.h | 5 -
> drivers/gpu/drm/i915/intel_display.c | 259
> -----------------------------------
> 2 files changed, 264 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 26c0525fc546..ea35a432bb68 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -618,11 +618,6 @@ struct drm_i915_display_funcs {
> void (*audio_codec_disable)(struct intel_encoder *encoder);
> void (*fdi_link_train)(struct drm_crtc *crtc);
> void (*init_clock_gating)(struct drm_device *dev);
> - int (*queue_flip)(struct drm_device *dev, struct drm_crtc *crtc,
> - struct drm_framebuffer *fb,
> - struct drm_i915_gem_object *obj,
> - struct drm_i915_gem_request *req,
> - uint64_t gtt_offset);
> void (*hpd_irq_setup)(struct drm_i915_private *dev_priv);
> /* clock updates for mode set */
> /* cursor updates */
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index 19a382445306..d96f6a86d6f6 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -10964,237 +10964,6 @@ void intel_finish_page_flip_mmio(struct
> drm_i915_private *dev_priv, int pipe)
> spin_unlock_irqrestore(&dev->event_lock, flags);
> }
>
> -static int intel_gen2_queue_flip(struct drm_device *dev,
> - struct drm_crtc *crtc,
> - struct drm_framebuffer *fb,
> - struct drm_i915_gem_object *obj,
> - struct drm_i915_gem_request *req,
> - uint64_t gtt_offset)
> -{
> - struct intel_engine_cs *engine = req->engine;
> - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> - u32 flip_mask;
> - int ret;
> -
> - ret = intel_ring_begin(req, 6);
> - if (ret)
> - return ret;
> -
> - /* Can't queue multiple flips, so wait for the previous
> - * one to finish before executing the next.
> - */
> - if (intel_crtc->plane)
> - flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
> - else
> - flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
> - intel_ring_emit(engine, MI_WAIT_FOR_EVENT | flip_mask);
> - intel_ring_emit(engine, MI_NOOP);
> - intel_ring_emit(engine, MI_DISPLAY_FLIP |
> - MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
> - intel_ring_emit(engine, fb->pitches[0]);
> - intel_ring_emit(engine, gtt_offset);
> - intel_ring_emit(engine, 0); /* aux display base address, unused */
> -
> - return 0;
> -}
> -
> -static int intel_gen3_queue_flip(struct drm_device *dev,
> - struct drm_crtc *crtc,
> - struct drm_framebuffer *fb,
> - struct drm_i915_gem_object *obj,
> - struct drm_i915_gem_request *req,
> - uint64_t gtt_offset)
> -{
> - struct intel_engine_cs *engine = req->engine;
> - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> - u32 flip_mask;
> - int ret;
> -
> - ret = intel_ring_begin(req, 6);
> - if (ret)
> - return ret;
> -
> - if (intel_crtc->plane)
> - flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
> - else
> - flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
> - intel_ring_emit(engine, MI_WAIT_FOR_EVENT | flip_mask);
> - intel_ring_emit(engine, MI_NOOP);
> - intel_ring_emit(engine, MI_DISPLAY_FLIP_I915 |
> - MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
> - intel_ring_emit(engine, fb->pitches[0]);
> - intel_ring_emit(engine, gtt_offset);
> - intel_ring_emit(engine, MI_NOOP);
> -
> - return 0;
> -}
> -
> -static int intel_gen4_queue_flip(struct drm_device *dev,
> - struct drm_crtc *crtc,
> - struct drm_framebuffer *fb,
> - struct drm_i915_gem_object *obj,
> - struct drm_i915_gem_request *req,
> - uint64_t gtt_offset)
> -{
> - struct intel_engine_cs *engine = req->engine;
> - struct drm_i915_private *dev_priv = dev->dev_private;
> - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> - uint32_t pf, pipesrc;
> - int ret;
> -
> - ret = intel_ring_begin(req, 4);
> - if (ret)
> - return ret;
> -
> - /* i965+ uses the linear or tiled offsets from the
> - * Display Registers (which do not change across a page-flip)
> - * so we need only reprogram the base address.
> - */
> - intel_ring_emit(engine, MI_DISPLAY_FLIP |
> - MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
> - intel_ring_emit(engine, fb->pitches[0]);
> - intel_ring_emit(engine, gtt_offset | obj->tiling_mode);
> -
> - /* XXX Enabling the panel-fitter across page-flip is so far
> - * untested on non-native modes, so ignore it for now.
> - * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
> - */
> - pf = 0;
> - pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
> - intel_ring_emit(engine, pf | pipesrc);
> -
> - return 0;
> -}
> -
> -static int intel_gen6_queue_flip(struct drm_device *dev,
> - struct drm_crtc *crtc,
> - struct drm_framebuffer *fb,
> - struct drm_i915_gem_object *obj,
> - struct drm_i915_gem_request *req,
> - uint64_t gtt_offset)
> -{
> - struct intel_engine_cs *engine = req->engine;
> - struct drm_i915_private *dev_priv = dev->dev_private;
> - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> - uint32_t pf, pipesrc;
> - int ret;
> -
> - ret = intel_ring_begin(req, 4);
> - if (ret)
> - return ret;
> -
> - intel_ring_emit(engine, MI_DISPLAY_FLIP |
> - MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
> - intel_ring_emit(engine, fb->pitches[0] | obj->tiling_mode);
> - intel_ring_emit(engine, gtt_offset);
> -
> - /* Contrary to the suggestions in the documentation,
> - * "Enable Panel Fitter" does not seem to be required when page
> - * flipping with a non-native mode, and worse causes a normal
> - * modeset to fail.
> - * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
> - */
> - pf = 0;
> - pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
> - intel_ring_emit(engine, pf | pipesrc);
> -
> - return 0;
> -}
> -
> -static int intel_gen7_queue_flip(struct drm_device *dev,
> - struct drm_crtc *crtc,
> - struct drm_framebuffer *fb,
> - struct drm_i915_gem_object *obj,
> - struct drm_i915_gem_request *req,
> - uint64_t gtt_offset)
> -{
> - struct intel_engine_cs *engine = req->engine;
> - struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> - uint32_t plane_bit = 0;
> - int len, ret;
> -
> - switch (intel_crtc->plane) {
> - case PLANE_A:
> - plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
> - break;
> - case PLANE_B:
> - plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
> - break;
> - case PLANE_C:
> - plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
> - break;
> - default:
> - WARN_ONCE(1, "unknown plane in flip command\n");
> - return -ENODEV;
> - }
> -
> - len = 4;
> - if (engine->id == RCS) {
> - len += 6;
> - /*
> - * On Gen 8, SRM is now taking an extra dword to accommodate
> - * 48bits addresses, and we need a NOOP for the batch size to
> - * stay even.
> - */
> - if (IS_GEN8(dev))
> - len += 2;
> - }
> -
> - /*
> - * BSpec MI_DISPLAY_FLIP for IVB:
> - * "The full packet must be contained within the same cache line."
> - *
> - * Currently the LRI+SRM+MI_DISPLAY_FLIP all fit within the same
> - * cacheline, if we ever start emitting more commands before
> - * the MI_DISPLAY_FLIP we may need to first emit everything else,
> - * then do the cacheline alignment, and finally emit the
> - * MI_DISPLAY_FLIP.
> - */
> - ret = intel_ring_cacheline_align(req);
> - if (ret)
> - return ret;
> -
> - ret = intel_ring_begin(req, len);
> - if (ret)
> - return ret;
> -
> - /* Unmask the flip-done completion message. Note that the bspec says
> that
> - * we should do this for both the BCS and RCS, and that we must not
> unmask
> - * more than one flip event at any time (or ensure that one flip message
> - * can be sent by waiting for flip-done prior to queueing new flips).
> - * Experimentation says that BCS works despite DERRMR masking all
> - * flip-done completion events and that unmasking all planes at once
> - * for the RCS also doesn't appear to drop events. Setting the DERRMR
> - * to zero does lead to lockups within MI_DISPLAY_FLIP.
> - */
> - if (engine->id == RCS) {
> - intel_ring_emit(engine, MI_LOAD_REGISTER_IMM(1));
> - intel_ring_emit_reg(engine, DERRMR);
> - intel_ring_emit(engine, ~(DERRMR_PIPEA_PRI_FLIP_DONE |
> - DERRMR_PIPEB_PRI_FLIP_DONE |
> - DERRMR_PIPEC_PRI_FLIP_DONE));
> - if (IS_GEN8(dev))
> - intel_ring_emit(engine, MI_STORE_REGISTER_MEM_GEN8 |
> - MI_SRM_LRM_GLOBAL_GTT);
> - else
> - intel_ring_emit(engine, MI_STORE_REGISTER_MEM |
> - MI_SRM_LRM_GLOBAL_GTT);
> - intel_ring_emit_reg(engine, DERRMR);
> - intel_ring_emit(engine, engine->scratch.gtt_offset + 256);
> - if (IS_GEN8(dev)) {
> - intel_ring_emit(engine, 0);
> - intel_ring_emit(engine, MI_NOOP);
> - }
> - }
> -
> - intel_ring_emit(engine, MI_DISPLAY_FLIP_I915 | plane_bit);
> - intel_ring_emit(engine, (fb->pitches[0] | obj->tiling_mode));
> - intel_ring_emit(engine, gtt_offset);
> - intel_ring_emit(engine, (MI_NOOP));
> -
> - return 0;
> -}
> -
> static void intel_mmio_flip_work_func(struct work_struct *w)
> {
> struct intel_flip_work *work =
> @@ -14753,34 +14522,6 @@ void intel_init_display_hooks(struct
> drm_i915_private *dev_priv)
> dev_priv->display.modeset_calc_cdclk =
> broxton_modeset_calc_cdclk;
> }
> -
> - switch (INTEL_INFO(dev_priv)->gen) {
> - case 2:
> - dev_priv->display.queue_flip = intel_gen2_queue_flip;
> - break;
> -
> - case 3:
> - dev_priv->display.queue_flip = intel_gen3_queue_flip;
> - break;
> -
> - case 4:
> - case 5:
> - dev_priv->display.queue_flip = intel_gen4_queue_flip;
> - break;
> -
> - case 6:
> - dev_priv->display.queue_flip = intel_gen6_queue_flip;
> - break;
> - case 7:
> - case 8: /* FIXME(BDW): Check that the gen8 RCS flip works. */
> - dev_priv->display.queue_flip = intel_gen7_queue_flip;
> - break;
> - case 9:
> - /* Drop through - unsupported since execlist only. */
> - default:
> - /* Default just returns -ENODEV to indicate unsupported */
> - break;
> - }
> }
>
> /*
> --
> 2.5.5
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Intel Sweden AB Registered Office: Knarrarnasgatan 15, 164 40 Kista, Stockholm,
Sweden Registration Number: 556189-6027
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
