On Fri, Apr 15, 2016 at 04:09:31PM +0300, Jani Nikula wrote:
> On Tue, 12 Apr 2016, ville.syrj...@linux.intel.com wrote:
> > From: Ville Syrjälä <ville.syrj...@linux.intel.com>
> >
> > Set up DPLL and DPLL_MD even when driving DSI output on VLV/CHV. While
> > the DPLL isn't used to provide the clock we still need the refclock, and
> > it appears that the pixel repeat factor also has an effect on DSI
> > output. So set up eveyrhing in DPLL and DPLL_MD as we would do for
> > DP/HDMI/VGA, but don't actually enable the DPLL or configure the
> > dividers via DPIO.
> >
> > Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
>
> Reviewed-by: Jani Nikula <jani.nik...@intel.com>
>
> I quickly glanced over 2-5 too, my earlier r-b on them still stand.
Thanks. Series pushed to dinq.
>
> > ---
> > drivers/gpu/drm/i915/intel_display.c | 120
> > +++++++++++++++++++++--------------
> > drivers/gpu/drm/i915/intel_dsi.c | 28 ++------
> > 2 files changed, 80 insertions(+), 68 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_display.c
> > b/drivers/gpu/drm/i915/intel_display.c
> > index 607dc41bcc68..7c74a930f45d 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -1530,45 +1530,47 @@ static void assert_pch_ports_disabled(struct
> > drm_i915_private *dev_priv,
> > assert_pch_hdmi_disabled(dev_priv, pipe, PCH_HDMID);
> > }
> >
> > +static void _vlv_enable_pll(struct intel_crtc *crtc,
> > + const struct intel_crtc_state *pipe_config)
> > +{
> > + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > + enum pipe pipe = crtc->pipe;
> > +
> > + I915_WRITE(DPLL(pipe), pipe_config->dpll_hw_state.dpll);
> > + POSTING_READ(DPLL(pipe));
> > + udelay(150);
> > +
> > + if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) ==
> > DPLL_LOCK_VLV), 1))
> > + DRM_ERROR("DPLL %d failed to lock\n", pipe);
> > +}
> > +
> > static void vlv_enable_pll(struct intel_crtc *crtc,
> > const struct intel_crtc_state *pipe_config)
> > {
> > - struct drm_device *dev = crtc->base.dev;
> > - struct drm_i915_private *dev_priv = dev->dev_private;
> > + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > enum pipe pipe = crtc->pipe;
> > - i915_reg_t reg = DPLL(pipe);
> > - u32 dpll = pipe_config->dpll_hw_state.dpll;
> >
> > assert_pipe_disabled(dev_priv, pipe);
> >
> > /* PLL is protected by panel, make sure we can write it */
> > assert_panel_unlocked(dev_priv, pipe);
> >
> > - I915_WRITE(reg, dpll);
> > - POSTING_READ(reg);
> > - udelay(150);
> > -
> > - if (wait_for(((I915_READ(reg) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
> > - DRM_ERROR("DPLL %d failed to lock\n", pipe);
> > + if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE)
> > + _vlv_enable_pll(crtc, pipe_config);
> >
> > I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
> > POSTING_READ(DPLL_MD(pipe));
> > }
> >
> > -static void chv_enable_pll(struct intel_crtc *crtc,
> > - const struct intel_crtc_state *pipe_config)
> > +
> > +static void _chv_enable_pll(struct intel_crtc *crtc,
> > + const struct intel_crtc_state *pipe_config)
> > {
> > - struct drm_device *dev = crtc->base.dev;
> > - struct drm_i915_private *dev_priv = dev->dev_private;
> > + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > enum pipe pipe = crtc->pipe;
> > enum dpio_channel port = vlv_pipe_to_channel(pipe);
> > u32 tmp;
> >
> > - assert_pipe_disabled(dev_priv, pipe);
> > -
> > - /* PLL is protected by panel, make sure we can write it */
> > - assert_panel_unlocked(dev_priv, pipe);
> > -
> > mutex_lock(&dev_priv->sb_lock);
> >
> > /* Enable back the 10bit clock to display controller */
> > @@ -1589,6 +1591,21 @@ static void chv_enable_pll(struct intel_crtc *crtc,
> > /* Check PLL is locked */
> > if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) ==
> > DPLL_LOCK_VLV), 1))
> > DRM_ERROR("PLL %d failed to lock\n", pipe);
> > +}
> > +
> > +static void chv_enable_pll(struct intel_crtc *crtc,
> > + const struct intel_crtc_state *pipe_config)
> > +{
> > + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > + enum pipe pipe = crtc->pipe;
> > +
> > + assert_pipe_disabled(dev_priv, pipe);
> > +
> > + /* PLL is protected by panel, make sure we can write it */
> > + assert_panel_unlocked(dev_priv, pipe);
> > +
> > + if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE)
> > + _chv_enable_pll(crtc, pipe_config);
> >
> > if (pipe != PIPE_A) {
> > /*
> > @@ -6073,14 +6090,12 @@ static void valleyview_crtc_enable(struct drm_crtc
> > *crtc)
> > if (encoder->pre_pll_enable)
> > encoder->pre_pll_enable(encoder);
> >
> > - if (!intel_crtc->config->has_dsi_encoder) {
> > - if (IS_CHERRYVIEW(dev)) {
> > - chv_prepare_pll(intel_crtc, intel_crtc->config);
> > - chv_enable_pll(intel_crtc, intel_crtc->config);
> > - } else {
> > - vlv_prepare_pll(intel_crtc, intel_crtc->config);
> > - vlv_enable_pll(intel_crtc, intel_crtc->config);
> > - }
> > + if (IS_CHERRYVIEW(dev)) {
> > + chv_prepare_pll(intel_crtc, intel_crtc->config);
> > + chv_enable_pll(intel_crtc, intel_crtc->config);
> > + } else {
> > + vlv_prepare_pll(intel_crtc, intel_crtc->config);
> > + vlv_enable_pll(intel_crtc, intel_crtc->config);
> > }
> >
> > for_each_encoder_on_crtc(dev, crtc, encoder)
> > @@ -6118,7 +6133,7 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
> > struct intel_encoder *encoder;
> > struct intel_crtc_state *pipe_config =
> > to_intel_crtc_state(crtc->state);
> > - int pipe = intel_crtc->pipe;
> > + enum pipe pipe = intel_crtc->pipe;
> >
> > if (WARN_ON(intel_crtc->active))
> > return;
> > @@ -7174,11 +7189,15 @@ static void vlv_compute_dpll(struct intel_crtc
> > *crtc,
> > struct intel_crtc_state *pipe_config)
> > {
> > pipe_config->dpll_hw_state.dpll = DPLL_INTEGRATED_REF_CLK_VLV |
> > - DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS |
> > - DPLL_VCO_ENABLE | DPLL_EXT_BUFFER_ENABLE_VLV;
> > + DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
> > if (crtc->pipe != PIPE_A)
> > pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
> >
> > + /* DPLL not used with DSI, but still need the rest set up */
> > + if (!intel_pipe_will_have_type(pipe_config, INTEL_OUTPUT_DSI))
> > + pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE |
> > + DPLL_EXT_BUFFER_ENABLE_VLV;
> > +
> > pipe_config->dpll_hw_state.dpll_md =
> > (pipe_config->pixel_multiplier - 1) <<
> > DPLL_MD_UDI_MULTIPLIER_SHIFT;
> > }
> > @@ -7187,11 +7206,14 @@ static void chv_compute_dpll(struct intel_crtc
> > *crtc,
> > struct intel_crtc_state *pipe_config)
> > {
> > pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV |
> > - DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS |
> > - DPLL_VCO_ENABLE;
> > + DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
> > if (crtc->pipe != PIPE_A)
> > pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
> >
> > + /* DPLL not used with DSI, but still need the rest set up */
> > + if (!intel_pipe_will_have_type(pipe_config, INTEL_OUTPUT_DSI))
> > + pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE;
> > +
> > pipe_config->dpll_hw_state.dpll_md =
> > (pipe_config->pixel_multiplier - 1) <<
> > DPLL_MD_UDI_MULTIPLIER_SHIFT;
> > }
> > @@ -7201,11 +7223,20 @@ static void vlv_prepare_pll(struct intel_crtc *crtc,
> > {
> > struct drm_device *dev = crtc->base.dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > - int pipe = crtc->pipe;
> > + enum pipe pipe = crtc->pipe;
> > u32 mdiv;
> > u32 bestn, bestm1, bestm2, bestp1, bestp2;
> > u32 coreclk, reg_val;
> >
> > + /* Enable Refclk */
> > + I915_WRITE(DPLL(pipe),
> > + pipe_config->dpll_hw_state.dpll &
> > + ~(DPLL_VCO_ENABLE | DPLL_EXT_BUFFER_ENABLE_VLV));
> > +
> > + /* No need to actually set up the DPLL with DSI */
> > + if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
> > + return;
> > +
> > mutex_lock(&dev_priv->sb_lock);
> >
> > bestn = pipe_config->dpll.n;
> > @@ -7292,14 +7323,21 @@ static void chv_prepare_pll(struct intel_crtc *crtc,
> > {
> > struct drm_device *dev = crtc->base.dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > - int pipe = crtc->pipe;
> > - i915_reg_t dpll_reg = DPLL(crtc->pipe);
> > + enum pipe pipe = crtc->pipe;
> > enum dpio_channel port = vlv_pipe_to_channel(pipe);
> > u32 loopfilter, tribuf_calcntr;
> > u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac;
> > u32 dpio_val;
> > int vco;
> >
> > + /* Enable Refclk and SSC */
> > + I915_WRITE(DPLL(pipe),
> > + pipe_config->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE);
> > +
> > + /* No need to actually set up the DPLL with DSI */
> > + if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
> > + return;
> > +
> > bestn = pipe_config->dpll.n;
> > bestm2_frac = pipe_config->dpll.m2 & 0x3fffff;
> > bestm1 = pipe_config->dpll.m1;
> > @@ -7310,12 +7348,6 @@ static void chv_prepare_pll(struct intel_crtc *crtc,
> > dpio_val = 0;
> > loopfilter = 0;
> >
> > - /*
> > - * Enable Refclk and SSC
> > - */
> > - I915_WRITE(dpll_reg,
> > - pipe_config->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE);
> > -
> > mutex_lock(&dev_priv->sb_lock);
> >
> > /* p1 and p2 divider */
> > @@ -7930,9 +7962,6 @@ static int chv_crtc_compute_clock(struct intel_crtc
> > *crtc,
> > memset(&crtc_state->dpll_hw_state, 0,
> > sizeof(crtc_state->dpll_hw_state));
> >
> > - if (crtc_state->has_dsi_encoder)
> > - return 0;
> > -
> > if (!crtc_state->clock_set &&
> > !chv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
> > refclk, NULL, &crtc_state->dpll)) {
> > @@ -7954,9 +7983,6 @@ static int vlv_crtc_compute_clock(struct intel_crtc
> > *crtc,
> > memset(&crtc_state->dpll_hw_state, 0,
> > sizeof(crtc_state->dpll_hw_state));
> >
> > - if (crtc_state->has_dsi_encoder)
> > - return 0;
> > -
> > if (!crtc_state->clock_set &&
> > !vlv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
> > refclk, NULL, &crtc_state->dpll)) {
> > diff --git a/drivers/gpu/drm/i915/intel_dsi.c
> > b/drivers/gpu/drm/i915/intel_dsi.c
> > index 9ff6435e7d38..22bd42a8aab0 100644
> > --- a/drivers/gpu/drm/i915/intel_dsi.c
> > +++ b/drivers/gpu/drm/i915/intel_dsi.c
> > @@ -311,6 +311,12 @@ static bool intel_dsi_compute_config(struct
> > intel_encoder *encoder,
> > pipe_config->cpu_transcoder = TRANSCODER_DSI_A;
> > }
> >
> > + /*
> > + * FIXME move the DSI PLL calc from vlv_enable_dsi_pll()
> > + * to .compute_config().
> > + */
> > + pipe_config->clock_set = true;
> > +
> > return true;
> > }
> >
> > @@ -498,8 +504,6 @@ static void intel_dsi_pre_enable(struct intel_encoder
> > *encoder)
> > struct drm_device *dev = encoder->base.dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> > - struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> > - enum pipe pipe = intel_crtc->pipe;
> > enum port port;
> > u32 tmp;
> >
> > @@ -521,19 +525,7 @@ static void intel_dsi_pre_enable(struct intel_encoder
> > *encoder)
> > msleep(intel_dsi->panel_on_delay);
> >
> > if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
> > - /*
> > - * Disable DPOunit clock gating, can stall pipe
> > - * and we need DPLL REFA always enabled
> > - */
> > - tmp = I915_READ(DPLL(pipe));
> > - tmp |= DPLL_REF_CLK_ENABLE_VLV;
> > - I915_WRITE(DPLL(pipe), tmp);
> > -
> > - /* update the hw state for DPLL */
> > - intel_crtc->config->dpll_hw_state.dpll =
> > - DPLL_INTEGRATED_REF_CLK_VLV |
> > - DPLL_REF_CLK_ENABLE_VLV |
> > DPLL_VGA_MODE_DIS;
> > -
> > + /* Disable DPOunit clock gating, can stall pipe */
> > tmp = I915_READ(DSPCLK_GATE_D);
> > tmp |= DPOUNIT_CLOCK_GATE_DISABLE;
> > I915_WRITE(DSPCLK_GATE_D, tmp);
> > @@ -832,12 +824,6 @@ static void intel_dsi_get_config(struct intel_encoder
> > *encoder,
> > if (IS_BROXTON(dev))
> > bxt_dsi_get_pipe_config(encoder, pipe_config);
> >
> > - /*
> > - * DPLL_MD is not used in case of DSI, reading will get some default
> > value
> > - * set dpll_md = 0
> > - */
> > - pipe_config->dpll_hw_state.dpll_md = 0;
> > -
> > pclk = intel_dsi_get_pclk(encoder, pipe_config->pipe_bpp);
> > if (!pclk)
> > return;
>
> --
> Jani Nikula, Intel Open Source Technology Center
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
