The same logic is used for DP and HDMI so move it to intel_dpio_phy.c.
Signed-off-by: Ander Conselvan de Oliveira
<ander.conselvan.de.olive...@intel.com>
---
drivers/gpu/drm/i915/i915_drv.h | 1 +
drivers/gpu/drm/i915/intel_dp.c | 83 +----------------------------------
drivers/gpu/drm/i915/intel_dpio_phy.c | 81 ++++++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_drv.h | 5 +++
drivers/gpu/drm/i915/intel_hdmi.c | 74 +------------------------------
5 files changed, 89 insertions(+), 155 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 52e5e88..7b2f453 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -3510,6 +3510,7 @@ void chv_set_phy_signal_level(struct intel_encoder
*encoder,
bool uniq_trans_scale);
void chv_data_lane_soft_reset(struct intel_encoder *encoder,
bool reset);
+void chv_phy_pre_pll_enable(struct intel_encoder *encoder);
int intel_gpu_freq(struct drm_i915_private *dev_priv, int val);
int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 4d15166..fb0c9c5 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -131,11 +131,6 @@ static void vlv_steal_power_sequencer(struct drm_device
*dev,
enum pipe pipe);
static void intel_dp_unset_edid(struct intel_dp *intel_dp);
-static unsigned int intel_dp_unused_lane_mask(int lane_count)
-{
- return ~((1 << lane_count) - 1) & 0xf;
-}
-
static int
intel_dp_max_link_bw(struct intel_dp *intel_dp)
{
@@ -2945,85 +2940,9 @@ static void chv_pre_enable_dp(struct intel_encoder
*encoder)
static void chv_dp_pre_pll_enable(struct intel_encoder *encoder)
{
- struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
- struct drm_device *dev = encoder->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc =
- to_intel_crtc(encoder->base.crtc);
- enum dpio_channel ch = vlv_dport_to_channel(dport);
- enum pipe pipe = intel_crtc->pipe;
- unsigned int lane_mask =
- intel_dp_unused_lane_mask(intel_crtc->config->lane_count);
- u32 val;
-
intel_dp_prepare(encoder);
- /*
- * Must trick the second common lane into life.
- * Otherwise we can't even access the PLL.
- */
- if (ch == DPIO_CH0 && pipe == PIPE_B)
- dport->release_cl2_override =
- !chv_phy_powergate_ch(dev_priv, DPIO_PHY0, DPIO_CH1,
true);
-
- chv_phy_powergate_lanes(encoder, true, lane_mask);
-
- mutex_lock(&dev_priv->sb_lock);
-
- /* Assert data lane reset */
- chv_data_lane_soft_reset(encoder, true);
-
- /* program left/right clock distribution */
- if (pipe != PIPE_B) {
- val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0);
- val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK);
- if (ch == DPIO_CH0)
- val |= CHV_BUFLEFTENA1_FORCE;
- if (ch == DPIO_CH1)
- val |= CHV_BUFRIGHTENA1_FORCE;
- vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val);
- } else {
- val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1);
- val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK);
- if (ch == DPIO_CH0)
- val |= CHV_BUFLEFTENA2_FORCE;
- if (ch == DPIO_CH1)
- val |= CHV_BUFRIGHTENA2_FORCE;
- vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val);
- }
-
- /* program clock channel usage */
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(ch));
- val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
- if (pipe != PIPE_B)
- val &= ~CHV_PCS_USEDCLKCHANNEL;
- else
- val |= CHV_PCS_USEDCLKCHANNEL;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW8(ch), val);
-
- if (intel_crtc->config->lane_count > 2) {
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW8(ch));
- val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
- if (pipe != PIPE_B)
- val &= ~CHV_PCS_USEDCLKCHANNEL;
- else
- val |= CHV_PCS_USEDCLKCHANNEL;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW8(ch), val);
- }
-
- /*
- * This a a bit weird since generally CL
- * matches the pipe, but here we need to
- * pick the CL based on the port.
- */
- val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW19(ch));
- if (pipe != PIPE_B)
- val &= ~CHV_CMN_USEDCLKCHANNEL;
- else
- val |= CHV_CMN_USEDCLKCHANNEL;
- vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW19(ch), val);
-
- mutex_unlock(&dev_priv->sb_lock);
+ chv_phy_pre_pll_enable(encoder);
}
static void chv_dp_post_pll_disable(struct intel_encoder *encoder)
diff --git a/drivers/gpu/drm/i915/intel_dpio_phy.c
b/drivers/gpu/drm/i915/intel_dpio_phy.c
index 9854c93..b4ca3ff 100644
--- a/drivers/gpu/drm/i915/intel_dpio_phy.c
+++ b/drivers/gpu/drm/i915/intel_dpio_phy.c
@@ -163,3 +163,84 @@ void chv_data_lane_soft_reset(struct intel_encoder
*encoder,
vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW1(ch), val);
}
}
+
+void chv_phy_pre_pll_enable(struct intel_encoder *encoder)
+{
+ struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
+ struct drm_device *dev = encoder->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc =
+ to_intel_crtc(encoder->base.crtc);
+ enum dpio_channel ch = vlv_dport_to_channel(dport);
+ enum pipe pipe = intel_crtc->pipe;
+ unsigned int lane_mask =
+ intel_dp_unused_lane_mask(intel_crtc->config->lane_count);
+ u32 val;
+
+ /*
+ * Must trick the second common lane into life.
+ * Otherwise we can't even access the PLL.
+ */
+ if (ch == DPIO_CH0 && pipe == PIPE_B)
+ dport->release_cl2_override =
+ !chv_phy_powergate_ch(dev_priv, DPIO_PHY0, DPIO_CH1,
true);
+
+ chv_phy_powergate_lanes(encoder, true, lane_mask);
+
+ mutex_lock(&dev_priv->sb_lock);
+
+ /* Assert data lane reset */
+ chv_data_lane_soft_reset(encoder, true);
+
+ /* program left/right clock distribution */
+ if (pipe != PIPE_B) {
+ val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0);
+ val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK);
+ if (ch == DPIO_CH0)
+ val |= CHV_BUFLEFTENA1_FORCE;
+ if (ch == DPIO_CH1)
+ val |= CHV_BUFRIGHTENA1_FORCE;
+ vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val);
+ } else {
+ val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1);
+ val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK);
+ if (ch == DPIO_CH0)
+ val |= CHV_BUFLEFTENA2_FORCE;
+ if (ch == DPIO_CH1)
+ val |= CHV_BUFRIGHTENA2_FORCE;
+ vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val);
+ }
+
+ /* program clock channel usage */
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(ch));
+ val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
+ if (pipe != PIPE_B)
+ val &= ~CHV_PCS_USEDCLKCHANNEL;
+ else
+ val |= CHV_PCS_USEDCLKCHANNEL;
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW8(ch), val);
+
+ if (intel_crtc->config->lane_count > 2) {
+ val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW8(ch));
+ val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
+ if (pipe != PIPE_B)
+ val &= ~CHV_PCS_USEDCLKCHANNEL;
+ else
+ val |= CHV_PCS_USEDCLKCHANNEL;
+ vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW8(ch), val);
+ }
+
+ /*
+ * This a a bit weird since generally CL
+ * matches the pipe, but here we need to
+ * pick the CL based on the port.
+ */
+ val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW19(ch));
+ if (pipe != PIPE_B)
+ val &= ~CHV_CMN_USEDCLKCHANNEL;
+ else
+ val |= CHV_CMN_USEDCLKCHANNEL;
+ vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW19(ch), val);
+
+ mutex_unlock(&dev_priv->sb_lock);
+}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index e0fcfa1..ad11313 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1323,6 +1323,11 @@ bool intel_dp_source_supports_hbr2(struct intel_dp
*intel_dp);
bool
intel_dp_get_link_status(struct intel_dp *intel_dp, uint8_t
link_status[DP_LINK_STATUS_SIZE]);
+static inline unsigned int intel_dp_unused_lane_mask(int lane_count)
+{
+ return ~((1 << lane_count) - 1) & 0xf;
+}
+
/* intel_dp_mst.c */
int intel_dp_mst_encoder_init(struct intel_digital_port *intel_dig_port, int
conn_id);
void intel_dp_mst_encoder_cleanup(struct intel_digital_port *intel_dig_port);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c
b/drivers/gpu/drm/i915/intel_hdmi.c
index c2d6139..4501906 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1658,81 +1658,9 @@ static void vlv_hdmi_pre_pll_enable(struct intel_encoder
*encoder)
static void chv_hdmi_pre_pll_enable(struct intel_encoder *encoder)
{
- struct intel_digital_port *dport = enc_to_dig_port(&encoder->base);
- struct drm_device *dev = encoder->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc =
- to_intel_crtc(encoder->base.crtc);
- enum dpio_channel ch = vlv_dport_to_channel(dport);
- enum pipe pipe = intel_crtc->pipe;
- u32 val;
-
intel_hdmi_prepare(encoder);
- /*
- * Must trick the second common lane into life.
- * Otherwise we can't even access the PLL.
- */
- if (ch == DPIO_CH0 && pipe == PIPE_B)
- dport->release_cl2_override =
- !chv_phy_powergate_ch(dev_priv, DPIO_PHY0, DPIO_CH1,
true);
-
- chv_phy_powergate_lanes(encoder, true, 0x0);
-
- mutex_lock(&dev_priv->sb_lock);
-
- /* Assert data lane reset */
- chv_data_lane_soft_reset(encoder, true);
-
- /* program left/right clock distribution */
- if (pipe != PIPE_B) {
- val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW5_CH0);
- val &= ~(CHV_BUFLEFTENA1_MASK | CHV_BUFRIGHTENA1_MASK);
- if (ch == DPIO_CH0)
- val |= CHV_BUFLEFTENA1_FORCE;
- if (ch == DPIO_CH1)
- val |= CHV_BUFRIGHTENA1_FORCE;
- vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW5_CH0, val);
- } else {
- val = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW1_CH1);
- val &= ~(CHV_BUFLEFTENA2_MASK | CHV_BUFRIGHTENA2_MASK);
- if (ch == DPIO_CH0)
- val |= CHV_BUFLEFTENA2_FORCE;
- if (ch == DPIO_CH1)
- val |= CHV_BUFRIGHTENA2_FORCE;
- vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val);
- }
-
- /* program clock channel usage */
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(ch));
- val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
- if (pipe != PIPE_B)
- val &= ~CHV_PCS_USEDCLKCHANNEL;
- else
- val |= CHV_PCS_USEDCLKCHANNEL;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW8(ch), val);
-
- val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW8(ch));
- val |= CHV_PCS_USEDCLKCHANNEL_OVRRIDE;
- if (pipe != PIPE_B)
- val &= ~CHV_PCS_USEDCLKCHANNEL;
- else
- val |= CHV_PCS_USEDCLKCHANNEL;
- vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW8(ch), val);
-
- /*
- * This a a bit weird since generally CL
- * matches the pipe, but here we need to
- * pick the CL based on the port.
- */
- val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW19(ch));
- if (pipe != PIPE_B)
- val &= ~CHV_CMN_USEDCLKCHANNEL;
- else
- val |= CHV_CMN_USEDCLKCHANNEL;
- vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW19(ch), val);
-
- mutex_unlock(&dev_priv->sb_lock);
+ chv_phy_pre_pll_enable(encoder);
}
static void chv_hdmi_post_pll_disable(struct intel_encoder *encoder)
--
2.4.11
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
