[Intel-gfx] [PATCH 2/8] drm/i915/dsi: add support for DSI sequence block v2 gpio element

[Jani Nikula]

In sequence block v2, and only in v2, the gpio source (i.e. IOSF port)
is specified separately.

Signed-off-by: Jani Nikula <jani.nik...@intel.com>
---
 drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c 
b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
index f687b2e9d8ca..765dd5cd23ac 100644
--- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
@@ -198,7 +198,7 @@ static const u8 *mipi_exec_delay(struct intel_dsi 
*intel_dsi, const u8 *data)
 
 static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
 {
-       u8 gpio_index, action;
+       u8 gpio_source, gpio_index, action, port;
        u16 function, pad;
        u32 val;
        struct drm_device *dev = intel_dsi->base.base.dev;
@@ -209,6 +209,9 @@ static const u8 *mipi_exec_gpio(struct intel_dsi 
*intel_dsi, const u8 *data)
 
        gpio_index = *data++;
 
+       /* gpio source in sequence v2 only */
+       gpio_source = (*data >> 1) & 3;
+
        /* pull up/down */
        action = *data++ & 1;
 
@@ -225,6 +228,17 @@ static const u8 *mipi_exec_gpio(struct intel_dsi 
*intel_dsi, const u8 *data)
        if (dev_priv->vbt.dsi.seq_version >= 3) {
                DRM_DEBUG_KMS("GPIO element v3 not supported\n");
                goto out;
+       } else if (dev_priv->vbt.dsi.seq_version == 2) {
+               if (gpio_source == 0) {
+                       port = IOSF_PORT_GPIO_NC;
+               } else if (gpio_source == 1) {
+                       port = IOSF_PORT_GPIO_SC;
+               } else {
+                       DRM_DEBUG_KMS("unknown gpio source %u\n", gpio_source);
+                       goto out;
+               }
+       } else {
+               port = IOSF_PORT_GPIO_NC;
        }
 
        function = gtable[gpio_index].function_reg;
@@ -234,15 +248,14 @@ static const u8 *mipi_exec_gpio(struct intel_dsi 
*intel_dsi, const u8 *data)
        if (!gtable[gpio_index].init) {
                /* program the function */
                /* FIXME: remove constant below */
-               vlv_iosf_sb_write(dev_priv, IOSF_PORT_GPIO_NC, function,
-                                 0x2000CC00);
+               vlv_iosf_sb_write(dev_priv, port, function, 0x2000CC00);
                gtable[gpio_index].init = 1;
        }
 
        val = 0x4 | action;
 
        /* pull up/down */
-       vlv_iosf_sb_write(dev_priv, IOSF_PORT_GPIO_NC, pad, val);
+       vlv_iosf_sb_write(dev_priv, port, pad, val);
        mutex_unlock(&dev_priv->sb_lock);
 
 out:
-- 
2.1.4

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx