On Tue, 15 Mar 2016, ville.syrj...@linux.intel.com wrote:
> [ text/plain ]
> From: Ville Syrjälä <ville.syrj...@linux.intel.com>
>
> On VLV at least, the BIOS may leave the DSI PLL enabled in some wonky
> state where it just refuses to lock. Simply disabling the PLL before
> reconfiguring it is not enough to fix it, but power gating the PLL
> prior to reconfiguring does work.
>
> This happens on BYT FFRD8 when booting with HDMI connected so the DSI
> display will not be lit up by the BIOS.
>
> Also we can remove the code for BXT that disables the PLL before
> enabling it again.
>
> v2: s/vlv/intel/ since BXT made thing generic
> v3: Remove the BXT disable PLL before enable trick
>
> Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
Acked-by: Jani Nikula <jani.nik...@intel.com>
> ---
> drivers/gpu/drm/i915/intel_dsi.c | 6 ++++++
> drivers/gpu/drm/i915/intel_dsi_pll.c | 8 --------
> 2 files changed, 6 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dsi.c
> b/drivers/gpu/drm/i915/intel_dsi.c
> index 4023b6bffa47..787411e1c36f 100644
> --- a/drivers/gpu/drm/i915/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/intel_dsi.c
> @@ -482,7 +482,13 @@ static void intel_dsi_pre_enable(struct intel_encoder
> *encoder)
>
> DRM_DEBUG_KMS("\n");
>
> + /*
> + * The BIOS may leave the PLL in a wonky state where it doesn't
> + * lock. It needs to be fully powered down to fix it.
> + */
> + intel_disable_dsi_pll(encoder);
> intel_enable_dsi_pll(encoder);
> +
> intel_dsi_prepare(encoder);
>
> /* Panel Enable over CRC PMIC */
> diff --git a/drivers/gpu/drm/i915/intel_dsi_pll.c
> b/drivers/gpu/drm/i915/intel_dsi_pll.c
> index 916cc92c1400..978cc2668a3d 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_pll.c
> +++ b/drivers/gpu/drm/i915/intel_dsi_pll.c
> @@ -474,14 +474,6 @@ static void bxt_enable_dsi_pll(struct intel_encoder
> *encoder)
>
> DRM_DEBUG_KMS("\n");
>
> - val = I915_READ(BXT_DSI_PLL_ENABLE);
> -
> - if (val & BXT_DSI_PLL_DO_ENABLE) {
> - WARN(1, "DSI PLL already enabled. Disabling it.\n");
> - val &= ~BXT_DSI_PLL_DO_ENABLE;
> - I915_WRITE(BXT_DSI_PLL_ENABLE, val);
> - }
> -
> /* Configure PLL vales */
> if (!bxt_configure_dsi_pll(encoder)) {
> DRM_ERROR("Configure DSI PLL failed, abort PLL enable\n");
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
