On Tue, Mar 15, 2016 at 06:43:54PM +0530, Shubhangi Shrivastava wrote:
> This patch sets the invert bit for hpd detection for each port
> based on VBT configuration. Since each AOB can be designed to
> depend on invert bit or not, it is expected if an AOB requires
> invert bit, the user will set respective bit in VBT.
>
> v2: Separated VBT parsing from the rest of the logic. (Jani)
>
> v3: Moved setting invert bit logic to bxt_hpd_irq_setup()
> and changed its logic to avoid looping twice. (Ville)
>
> v4: Changed the logic to mask out the bits first and then
> set them to remove need of temporary variable. (Ville)
>
> Signed-off-by: Sivakumar Thulasimani <sivakumar.thulasim...@intel.com>
> Signed-off-by: Durgadoss R <durgados...@intel.com>
> Signed-off-by: Shubhangi Shrivastava <shubhangi.shrivast...@intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.h | 2 ++
> drivers/gpu/drm/i915/i915_irq.c | 20 ++++++++++++++++++++
> drivers/gpu/drm/i915/i915_reg.h | 8 ++++++++
> drivers/gpu/drm/i915/intel_bios.c | 35 +++++++++++++++++++++++++++++++++++
> 4 files changed, 65 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 1557d65..7a00966 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -3334,6 +3334,8 @@ extern void intel_i2c_reset(struct drm_device *dev);
> /* intel_bios.c */
> int intel_bios_init(struct drm_i915_private *dev_priv);
> bool intel_bios_is_valid_vbt(const void *buf, size_t size);
> +bool intel_bios_is_port_hpd_inverted(struct drm_i915_private *dev_priv,
> + enum port port);
>
> /* intel_opregion.c */
> #ifdef CONFIG_ACPI
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index 53e5104..0a1e378 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -3503,6 +3503,26 @@ static void bxt_hpd_irq_setup(struct drm_device *dev)
> hotplug = I915_READ(PCH_PORT_HOTPLUG);
> hotplug |= PORTC_HOTPLUG_ENABLE | PORTB_HOTPLUG_ENABLE |
> PORTA_HOTPLUG_ENABLE;
> +
> + DRM_DEBUG_KMS("Invert bit setting: hp_ctl:%x hp_port:%x\n",
> + hotplug, enabled_irqs);
> + hotplug &= ~BXT_DDI_HPD_INVERT_MASK;
> +
> + /*
> + * For BXT invert bit has to be set based on AOB design
> + * for HPD detection logic, update it based on VBT fields.
> + */
> +
> + if ((enabled_irqs & BXT_DE_PORT_HP_DDIA) &&
> + intel_bios_is_port_hpd_inverted(dev_priv, PORT_A))
> + hotplug |= BXT_DDIA_HPD_INVERT;
> + if ((enabled_irqs & BXT_DE_PORT_HP_DDIB) &&
> + intel_bios_is_port_hpd_inverted(dev_priv, PORT_B))
> + hotplug |= BXT_DDIB_HPD_INVERT;
> + if ((enabled_irqs & BXT_DE_PORT_HP_DDIC) &&
> + intel_bios_is_port_hpd_inverted(dev_priv, PORT_C))
> + hotplug |= BXT_DDIC_HPD_INVERT;
> +
> I915_WRITE(PCH_PORT_HOTPLUG, hotplug);
> }
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 7dfc400..f80b870 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6213,6 +6213,14 @@ enum skl_disp_power_wells {
> #define PORTB_HOTPLUG_SHORT_DETECT (1 << 0)
> #define PORTB_HOTPLUG_LONG_DETECT (2 << 0)
>
> +/* BXT hotplug control */
> +#define BXT_DDIA_HPD_INVERT (1 << 27)
> +#define BXT_DDIC_HPD_INVERT (1 << 11)
> +#define BXT_DDIB_HPD_INVERT (1 << 3)
> +#define BXT_DDI_HPD_INVERT_MASK (BXT_DDIA_HPD_INVERT | \
> + BXT_DDIB_HPD_INVERT | \
> + BXT_DDIC_HPD_INVERT)
The bits defines should be inserted to the proper place in the already
existing set of defines for this register.
> +
> #define PCH_PORT_HOTPLUG2 _MMIO(0xc403C) /* SHOTPLUG_CTL2 SPT+ */
> #define PORTE_HOTPLUG_ENABLE (1 << 4)
> #define PORTE_HOTPLUG_STATUS_MASK (3 << 0)
> diff --git a/drivers/gpu/drm/i915/intel_bios.c
> b/drivers/gpu/drm/i915/intel_bios.c
> index a26d4b4..71d62f8 100644
> --- a/drivers/gpu/drm/i915/intel_bios.c
> +++ b/drivers/gpu/drm/i915/intel_bios.c
> @@ -105,6 +105,41 @@ find_section(const void *_bdb, int section_id)
> return NULL;
> }
>
> +bool
> +intel_bios_is_port_hpd_inverted(struct drm_i915_private *dev_priv,
> + enum port port)
> +{
> + int i;
> +
> + if (WARN_ON_ONCE(!IS_BROXTON(dev_priv)))
> + return false;
> +
> + for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
> +
> + if (!dev_priv->vbt.child_dev[i].common.hpd_invert)
> + continue;
> +
> + switch (dev_priv->vbt.child_dev[i].common.dvo_port) {
> + case DVO_PORT_DPA:
> + case DVO_PORT_HDMIA:
> + if (port == PORT_A)
> + return true;
break;
> + case DVO_PORT_DPB:
> + case DVO_PORT_HDMIB:
> + if (port == PORT_B)
> + return true;
break;
> + case DVO_PORT_DPC:
> + case DVO_PORT_HDMIC:
> + if (port == PORT_C)
> + return true;
break;
With the missing breaks added and the defines moved to the right
place this is
Reviewed-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> + default:
> + break;
> + }
> + }
> +
> + return false;
> +}
> +
> static void
> fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
> const struct lvds_dvo_timing *dvo_timing)
> --
> 2.6.1
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
