According to the new init phases scheme we should have a definite step
in the init sequence where MMIO access is setup, so move the
corresponding code to a separate function. This also has the benefit of
making the error path cleaner both in the new function and in
i915_driver_load()/unload().
No functional change.
Suggested by Chris.
Cc: Chris Wilson <ch...@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.d...@intel.com>
---
drivers/gpu/drm/i915/i915_dma.c | 69 +++++++++++++++++++++++++++++------------
1 file changed, 50 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 93e7951..ab97404 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1051,6 +1051,50 @@ static void i915_mmio_cleanup(struct drm_device *dev)
}
/**
+ * i915_driver_init_mmio - setup device MMIO
+ * @dev_priv: device private
+ *
+ * Setup minimal device state necessary for MMIO accesses later in the
+ * initialization sequence. The setup here should avoid any other device-wide
+ * side effects or exposing the driver via kernel internal or user space
+ * interfaces.
+ */
+static int i915_driver_init_mmio(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+ int ret;
+
+ if (i915_get_bridge_dev(dev))
+ return -EIO;
+
+ ret = i915_mmio_setup(dev);
+ if (ret < 0)
+ goto put_bridge;
+
+ intel_uncore_init(dev);
+
+ return 0;
+
+put_bridge:
+ pci_dev_put(dev_priv->bridge_dev);
+
+ return ret;
+}
+
+/**
+ * i915_driver_cleanup_mmio - cleanup the setup done in i915_driver_init_mmio()
+ * @dev_priv: device private
+ */
+static void i915_driver_cleanup_mmio(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+
+ intel_uncore_fini(dev);
+ i915_mmio_cleanup(dev);
+ pci_dev_put(dev_priv->bridge_dev);
+}
+
+/**
* i915_driver_load - setup chip and create an initial config
* @dev: DRM device
* @flags: startup flags
@@ -1081,22 +1125,15 @@ int i915_driver_load(struct drm_device *dev, unsigned
long flags)
intel_runtime_pm_get(dev_priv);
- if (i915_get_bridge_dev(dev)) {
- ret = -EIO;
- goto out_runtime_pm_put;
- }
-
- ret = i915_mmio_setup(dev);
+ ret = i915_driver_init_mmio(dev_priv);
if (ret < 0)
- goto put_bridge;
-
- intel_uncore_init(dev);
+ goto out_runtime_pm_put;
intel_device_info_runtime_init(dev);
ret = i915_gem_gtt_init(dev);
if (ret)
- goto out_uncore_fini;
+ goto out_cleanup_mmio;
/* WARNING: Apparently we must kick fbdev drivers before vgacon,
* otherwise the vga fbdev driver falls over. */
@@ -1219,11 +1256,8 @@ out_disable_msi:
io_mapping_free(dev_priv->gtt.mappable);
out_gtt:
i915_global_gtt_cleanup(dev);
-out_uncore_fini:
- intel_uncore_fini(dev);
- i915_mmio_cleanup(dev);
-put_bridge:
- pci_dev_put(dev_priv->bridge_dev);
+out_cleanup_mmio:
+ i915_driver_cleanup_mmio(dev_priv);
out_runtime_pm_put:
intel_runtime_pm_put(dev_priv);
i915_driver_cleanup_early(dev_priv);
@@ -1304,10 +1338,7 @@ int i915_driver_unload(struct drm_device *dev)
io_mapping_free(dev_priv->gtt.mappable);
i915_global_gtt_cleanup(dev);
- intel_uncore_fini(dev);
- i915_mmio_cleanup(dev);
-
- pci_dev_put(dev_priv->bridge_dev);
+ i915_driver_cleanup_mmio(dev_priv);
intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
--
2.5.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
