From: Yogesh Mohan Marimuthu <yogesh.mohan.marimu...@intel.com>

The GPIO configuration and register offsets are different from
baytrail for cherrytrail. Port the gpio programming accordingly
for cherrytrail in this patch.

v2: Removing the duplication of parsing

Cc: Jani Nikula <jani.nik...@intel.com>
Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohan.marimu...@intel.com>
Signed-off-by: Deepak M <m.dee...@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h            |  20 ++++++
 drivers/gpu/drm/i915/intel_dsi_panel_vbt.c | 107 ++++++++++++++++++++++-------
 2 files changed, 102 insertions(+), 25 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 606dc71..fc57477 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -615,6 +615,16 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define   IOSF_PORT_NC                         0x11
 #define   IOSF_PORT_DPIO                       0x12
 #define   IOSF_PORT_GPIO_NC                    0x13
+#define   CHV_IOSF_PORT_GPIO_N                 0x13
+#define   CHV_IOSF_PORT_GPIO_SE                        0x48
+#define   CHV_IOSF_PORT_GPIO_SW                        0xB2
+#define   CHV_IOSF_PORT_GPIO_E                 0xA8
+#define   CHV_MAX_GPIO_NUM_N                   72
+#define   CHV_MAX_GPIO_NUM_SE                  99
+#define   CHV_MAX_GPIO_NUM_SW                  197
+#define   CHV_MIN_GPIO_NUM_SE                  73
+#define   CHV_MIN_GPIO_NUM_SW                  100
+#define   CHV_MIN_GPIO_NUM_E                   198
 #define   IOSF_PORT_CCK                                0x14
 #define   IOSF_PORT_DPIO_2                     0x1a
 #define   IOSF_PORT_FLISDSI                    0x1b
@@ -630,6 +640,16 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
 #define VLV_GPIO_CFG                           0x2000CC00
 #define VLV_GPIO_INPUT_DIS                     0x04
 
+#define CHV_PAD_FMLY_BASE                      0x4400
+#define CHV_PAD_FMLY_SIZE                      0x400
+#define CHV_PAD_CFG_0_1_REG_SIZE               0x8
+#define CHV_PAD_CFG_REG_SIZE                   0x4
+#define CHV_VBT_MAX_PINS_PER_FMLY              15
+
+#define CHV_GPIO_CFG_UNLOCK                    0x00000000
+#define CHV_GPIO_CFG_HIZ                       0x00008100
+#define CHV_GPIO_CFG_TX_STATE_SHIFT            1
+
 /* See configdb bunit SB addr map */
 #define BUNIT_REG_BISOC                                0x11
 
diff --git a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c 
b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
index 794bd1f..4849515 100644
--- a/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_panel_vbt.c
@@ -685,34 +685,13 @@ static const u8 *mipi_exec_delay(struct intel_dsi 
*intel_dsi, const u8 *data)
        return data;
 }
 
-static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
+void vlv_program_gpio(struct intel_dsi *intel_dsi, u8 gpio, u8 action)
 {
-       u8 gpio, action;
+       struct drm_device *dev = intel_dsi->base.base.dev;
+       struct drm_i915_private *dev_priv = dev->dev_private;
        u16 function, pad;
        u32 val;
        u8 port;
-       struct drm_device *dev = intel_dsi->base.base.dev;
-       struct drm_i915_private *dev_priv = dev->dev_private;
-
-       DRM_DEBUG_DRIVER("MIPI: executing gpio element\n");
-
-       if (dev_priv->vbt.dsi.seq_version >= 3)
-               data++;
-
-       gpio = *data++;
-
-       /* pull up/down */
-       action = *data++ & 1;
-
-       if (gpio >= ARRAY_SIZE(gtable)) {
-               DRM_DEBUG_KMS("unknown gpio %u\n", gpio);
-               goto out;
-       }
-
-       if (!IS_VALLEYVIEW(dev_priv)) {
-               DRM_DEBUG_KMS("GPIO element not supported on this platform\n");
-               goto out;
-       }
 
        if (dev_priv->vbt.dsi.seq_version >= 3) {
                if (gpio <= IOSF_MAX_GPIO_NUM_NC) {
@@ -728,7 +707,7 @@ static const u8 *mipi_exec_gpio(struct intel_dsi 
*intel_dsi, const u8 *data)
                        port = IOSF_PORT_GPIO_SUS;
                } else {
                        DRM_ERROR("GPIO number is not present in the table\n");
-                       goto out;
+                       return;
                }
        } else {
                port = IOSF_PORT_GPIO_NC;
@@ -750,11 +729,89 @@ static const u8 *mipi_exec_gpio(struct intel_dsi 
*intel_dsi, const u8 *data)
        /* pull up/down */
        vlv_iosf_sb_write(dev_priv, port, pad, val);
        mutex_unlock(&dev_priv->sb_lock);
+}
+
+void chv_program_gpio(struct intel_dsi *intel_dsi, u8 gpio, u8 action)
+{
+       struct drm_device *dev = intel_dsi->base.base.dev;
+       struct drm_i915_private *dev_priv = dev->dev_private;
+       u16 function, pad;
+       u16 family_num;
+       u8 block;
+
+       if (dev_priv->vbt.dsi.seq_version >= 3) {
+               if (gpio <= CHV_MAX_GPIO_NUM_N) {
+                       block = CHV_IOSF_PORT_GPIO_N;
+                       DRM_DEBUG_DRIVER("GPIO is in the north Block\n");
+               } else if (gpio <= CHV_MAX_GPIO_NUM_SE) {
+                       block = CHV_IOSF_PORT_GPIO_SE;
+                       gpio = gpio - CHV_MIN_GPIO_NUM_SE;
+                       DRM_DEBUG_DRIVER("GPIO is in the south east Block\n");
+               } else if (gpio <= CHV_MAX_GPIO_NUM_SW) {
+                       block = CHV_IOSF_PORT_GPIO_SW;
+                       gpio = gpio - CHV_MIN_GPIO_NUM_SW;
+                       DRM_DEBUG_DRIVER("GPIO is in the south west Block\n");
+               } else {
+                       block = CHV_IOSF_PORT_GPIO_E;
+                       gpio = gpio - CHV_MIN_GPIO_NUM_E;
+                       DRM_DEBUG_DRIVER("GPIO is in the east Block\n");
+               }
+       } else
+               block = IOSF_PORT_GPIO_NC;
+
+       family_num =  gpio / CHV_VBT_MAX_PINS_PER_FMLY;
+       gpio = gpio - (family_num * CHV_VBT_MAX_PINS_PER_FMLY);
+       pad = CHV_PAD_FMLY_BASE + (family_num * CHV_PAD_FMLY_SIZE) +
+               (((u16)gpio) * CHV_PAD_CFG_0_1_REG_SIZE);
+       function = pad + CHV_PAD_CFG_REG_SIZE;
+
+       mutex_lock(&dev_priv->sb_lock);
+       vlv_iosf_sb_write(dev_priv, block, function,
+                       CHV_GPIO_CFG_UNLOCK);
+       vlv_iosf_sb_write(dev_priv, block, pad, CHV_GPIO_CFG_HIZ |
+                       (action << CHV_GPIO_CFG_TX_STATE_SHIFT));
+       mutex_unlock(&dev_priv->sb_lock);
+
+}
+
+static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
+{
+       u8 gpio, action;
+       struct drm_device *dev = intel_dsi->base.base.dev;
+       struct drm_i915_private *dev_priv = dev->dev_private;
+
+       DRM_DEBUG_DRIVER("MIPI: executing gpio element\n");
+
+       if (dev_priv->vbt.dsi.seq_version >= 3)
+               data++;
+
+       gpio = *data++;
+
+       /* pull up/down */
+       action = *data++ & 1;
+
+       if (gpio >= ARRAY_SIZE(gtable)) {
+               DRM_DEBUG_KMS("unknown gpio %u\n", gpio);
+               goto out;
+       }
+
+       if (!IS_VALLEYVIEW(dev_priv)) {
+               DRM_DEBUG_KMS("GPIO element not supported on this platform\n");
+               goto out;
+       }
+
+       if (IS_VALLEYVIEW(dev))
+               vlv_program_gpio(intel_dsi, gpio, action);
+       else if (IS_CHERRYVIEW(dev))
+               chv_program_gpio(intel_dsi, gpio, action);
+       else
+               DRM_ERROR("GPIO programming missing for this platform.\n");
 
 out:
        return data;
 }
 
+
 static const u8 *mipi_exec_i2c_skip(struct intel_dsi *intel_dsi, const u8 
*data)
 {
        return data + *(data + 6) + 7;
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to