On Fri, Jan 15, 2016 at 11:51:31AM +0200, Jani Nikula wrote:
> On Thu, 14 Jan 2016, Ville Syrjälä <ville.syrj...@linux.intel.com> wrote:
> > On Thu, Jan 14, 2016 at 05:12:07PM +0200, Jani Nikula wrote:
> >> Two errors in a single line. The size was read from the wrong offset,
> >> and the end index didn't take the five bytes for sequence byte and size
> >> of sequence into account. Fix it all, and break up the calculations a
> >> bit to make it clearer.
> >>
> >> Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
> >> Reported-by: Mika Kahola <mika.kah...@intel.com>
> >> Fixes: 2a33d93486f2 ("drm/i915/bios: add support for MIPI sequence block
> >> v3")
> >> Signed-off-by: Jani Nikula <jani.nik...@intel.com>
> >> ---
> >> drivers/gpu/drm/i915/intel_bios.c | 17 ++++++++++++++---
> >> 1 file changed, 14 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/i915/intel_bios.c
> >> b/drivers/gpu/drm/i915/intel_bios.c
> >> index 12e2f8b8bf9c..bf62a19c8f69 100644
> >> --- a/drivers/gpu/drm/i915/intel_bios.c
> >> +++ b/drivers/gpu/drm/i915/intel_bios.c
> >> @@ -842,6 +842,7 @@ static int goto_next_sequence_v3(const u8 *data, int
> >> index, int total)
> >> {
> >> int seq_end;
> >> u16 len;
> >> + u32 size_of_sequence;
> >>
> >> /*
> >> * Could skip sequence based on Size of Sequence alone, but also do some
> >> @@ -852,14 +853,24 @@ static int goto_next_sequence_v3(const u8 *data, int
> >> index, int total)
> >> return 0;
> >> }
> >>
> >> - seq_end = index + *((const u32 *)(data + 1));
> >> + /* Skip Sequence Byte. */
> >> + index++;
> >> +
> >> + /*
> >> + * Size of Sequence. Excludes the Sequence Byte and the size itself,
> >> + * includes MIPI_SEQ_ELEM_END byte, excludes the final MIPI_SEQ_END
> >> + * byte.
> >> + */
> >> + size_of_sequence = *((const uint32_t *)(data + index));
> >
> > Hmm. So it was reading from 'data+1' and now it's basically 'data+index+1'.
> > So it was correct for the first sequence, and busted for later ones I
> > suppose.
> >
> >> + index += 4;
> >> +
> >> + seq_end = index + size_of_sequence;
> >
> > And now we count the size of the sequence starting from the operation
> > byte, before we counted it from the sequence byte. "Fortunately" the spec
> > doesn't even tell us which is correct. If it works, it works.
> >
> > Reviewed-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
>
> Pushed to drm-intel-next-queued, thanks for the review and testing.
You failed bat CI. Please make that the failure really is pre-existing and
if so dig out the bugzilla for it. If that's not the case please revert.
I'll paste you the link to the internal wiki in private.
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
