On Thu, Jan 14, 2016 at 05:32:43PM +0530, Shobhit Kumar wrote:
> From: "Kumar, Mahesh" <mahesh1.ku...@intel.com>
>
> Use FB size for relative data rate calculation. don't always use
Minor wording nitpick: it's not really the FB size you're using here
but rather the plane size. The FB itself may be larger than the plane
and largely offscreen.
> pipe source width & height.
> adjust height & width according to rotation.
>
> Signed-off-by: Kumar, Mahesh <mahesh1.ku...@intel.com>
> ---
> drivers/gpu/drm/i915/intel_pm.c | 42
> ++++++++++++++++++++++++++++++++---------
> 1 file changed, 33 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 68f21b9..d33c4ff 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -2928,24 +2928,33 @@ skl_plane_relative_data_rate(const struct
> intel_crtc_state *cstate,
> int y)
> {
> struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
> + struct intel_plane_state *intel_pstate = to_intel_plane_state(pstate);
> struct drm_framebuffer *fb = pstate->fb;
> + uint32_t width = 0, height = 0;
> +
> + if (drm_rect_width(&intel_pstate->src)) {
> + width = drm_rect_width(&intel_pstate->src) >> 16;
> + height = drm_rect_height(&intel_pstate->src) >> 16;
> + } else {
> + width = intel_crtc->config->pipe_src_w;
> + height = intel_crtc->config->pipe_src_h;
The else block would mean the plane is invisible (either off or fully
clipped), right? Shouldn't our relative data rate be 0 in that case
(instead of max possible)?
> + }
> +
> + if (intel_rotation_90_or_270(pstate->rotation))
> + swap(width, height);
>
> /* for planar format */
> if (fb->pixel_format == DRM_FORMAT_NV12) {
> if (y) /* y-plane data rate */
> - return intel_crtc->config->pipe_src_w *
> - intel_crtc->config->pipe_src_h *
> + return width * height *
> drm_format_plane_cpp(fb->pixel_format, 0);
> else /* uv-plane data rate */
> - return (intel_crtc->config->pipe_src_w/2) *
> - (intel_crtc->config->pipe_src_h/2) *
> + return (width / 2) * (height / 2) *
> drm_format_plane_cpp(fb->pixel_format, 1);
> }
>
> /* for packed formats */
> - return intel_crtc->config->pipe_src_w *
> - intel_crtc->config->pipe_src_h *
> - drm_format_plane_cpp(fb->pixel_format, 0);
> + return width * height * drm_format_plane_cpp(fb->pixel_format, 0);
> }
>
> /*
> @@ -3181,10 +3190,25 @@ static bool skl_compute_plane_wm(const struct
> drm_i915_private *dev_priv,
> uint32_t res_blocks, res_lines;
> uint32_t selected_result;
> uint8_t bytes_per_pixel;
> + struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
> + struct intel_plane_state *intel_pstate =
> to_intel_plane_state(plane->state);
> + uint32_t width = 0, height = 0;
>
> if (latency == 0 || !cstate->base.active || !fb)
> return false;
>
> + if (drm_rect_width(&intel_pstate->src)) {
> + width = drm_rect_width(&intel_pstate->src) >> 16;
> + height = drm_rect_height(&intel_pstate->src) >> 16;
> + } else {
> + width = intel_crtc->config->pipe_src_w;
> + height = intel_crtc->config->pipe_src_h;
> + }
We're already bailing above this on !fb; shouldn't we do the same on a
plane that has a valid fb but is disabled due to being fully clipped
(which I think is the only thing that will trigger the else block here)?
Matt
> +
> + if (intel_rotation_90_or_270(plane->state->rotation))
> + swap(width, height);
> +
> + /* for planar format */
> bytes_per_pixel = (fb->pixel_format == DRM_FORMAT_NV12) ?
> drm_format_plane_cpp(fb->pixel_format, 1) :
> drm_format_plane_cpp(fb->pixel_format, 0);
> @@ -3193,12 +3217,12 @@ static bool skl_compute_plane_wm(const struct
> drm_i915_private *dev_priv,
> latency);
> method2 = skl_wm_method2(skl_pipe_pixel_rate(cstate),
> cstate->base.adjusted_mode.crtc_htotal,
> - cstate->pipe_src_w,
> + width,
> bytes_per_pixel,
> fb->modifier[0],
> latency);
>
> - plane_bytes_per_line = cstate->pipe_src_w * bytes_per_pixel;
> + plane_bytes_per_line = width * bytes_per_pixel;
> plane_blocks_per_line = DIV_ROUND_UP(plane_bytes_per_line, 512);
>
> if (fb->modifier[0] == I915_FORMAT_MOD_Y_TILED ||
> --
> 2.4.3
>
--
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
