i915 validates that requested offset is in canonical form, so tests need
to convert the offsets as required.
Also add test to verify non-canonical 48-bit address will be rejected.
v2: Use sign_extend64 for converting to canonical form (Tvrtko)
Cc: Vinay Belgaumkar <vinay.belgaum...@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursu...@linux.intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaum...@intel.com> (v1)
Signed-off-by: Michel Thierry <michel.thie...@intel.com>
---
tests/gem_softpin.c | 69 +++++++++++++++++++++++++++++++++++++----------------
1 file changed, 49 insertions(+), 20 deletions(-)
diff --git a/tests/gem_softpin.c b/tests/gem_softpin.c
index 0919716..1cbde4e 100644
--- a/tests/gem_softpin.c
+++ b/tests/gem_softpin.c
@@ -67,7 +67,7 @@ static void *create_mem_buffer(uint64_t size);
static int gem_call_userptr_ioctl(int fd, i915_gem_userptr *userptr);
static void gem_pin_userptr_test(void);
static void gem_pin_bo_test(void);
-static void gem_pin_invalid_vma_test(bool test_decouple_flags);
+static void gem_pin_invalid_vma_test(bool test_decouple_flags, bool
test_canonical_offset);
static void gem_pin_overlap_test(void);
static void gem_pin_high_address_test(void);
@@ -198,6 +198,18 @@ static void setup_exec_obj(struct
drm_i915_gem_exec_object2 *exec,
exec->offset = offset;
}
+/* gen8_canonical_addr
+ * Used to convert any address into canonical form, i.e. [63:48] == [47].
+ * Based on kernel's sign_extend64 implementation.
+ * @address - a virtual address
+*/
+#define GEN8_HIGH_ADDRESS_BIT 47
+static uint64_t gen8_canonical_addr(uint64_t address)
+{
+ __u8 shift = 63 - GEN8_HIGH_ADDRESS_BIT;
+ return (__s64)(address << shift) >> shift;
+}
+
/* gem_store_data_svm
* populate batch buffer with MI_STORE_DWORD_IMM command
* @fd: drm file descriptor
@@ -630,6 +642,7 @@ static void gem_pin_overlap_test(void)
* Share with GPU using userptr ioctl
* Create batch buffer to write DATA in first element of each buffer
* Pin each buffer to varying addresses starting from 0x800000000000 going
below
+ * (requires offsets in canonical form)
* Execute Batch Buffer on Blit ring STRESS_NUM_LOOPS times
* Validate every buffer has DATA in first element
* Rinse and Repeat on Render ring
@@ -637,7 +650,7 @@ static void gem_pin_overlap_test(void)
#define STRESS_NUM_BUFFERS 100000
#define STRESS_NUM_LOOPS 100
#define STRESS_STORE_COMMANDS 4 * STRESS_NUM_BUFFERS
-
+#define STRESS_START_ADDRESS 0x800000000000
static void gem_softpin_stress_test(void)
{
i915_gem_userptr userptr;
@@ -650,7 +663,7 @@ static void gem_softpin_stress_test(void)
uint32_t batch_buf_handle;
int ring, len;
int buf, loop;
- uint64_t pinning_offset = 0x800000000000;
+ uint64_t pinning_offset = STRESS_START_ADDRESS;
fd = drm_open_driver(DRIVER_INTEL);
igt_require(uses_full_ppgtt(fd, FULL_48_BIT_PPGTT));
@@ -680,10 +693,10 @@ static void gem_softpin_stress_test(void)
setup_exec_obj(&exec_object2[buf], shared_handle[buf],
EXEC_OBJECT_PINNED |
EXEC_OBJECT_SUPPORTS_48B_ADDRESS,
- pinning_offset);
+ gen8_canonical_addr(pinning_offset));
len += gem_store_data_svm(fd, batch_buffer + (len/4),
- pinning_offset, buf,
- (buf == STRESS_NUM_BUFFERS-1)? \
+ gen8_canonical_addr(pinning_offset),
+ buf, (buf == STRESS_NUM_BUFFERS-1)? \
true:false);
/* decremental 4K aligned address */
@@ -705,10 +718,11 @@ static void gem_softpin_stress_test(void)
for (loop = 0; loop < STRESS_NUM_LOOPS; loop++) {
submit_and_sync(fd, &execbuf, batch_buf_handle);
/* Set pinning offset back to original value */
- pinning_offset = 0x800000000000;
+ pinning_offset = STRESS_START_ADDRESS;
for(buf = 0; buf < STRESS_NUM_BUFFERS; buf++) {
gem_userptr_sync(fd, shared_handle[buf]);
- igt_assert(exec_object2[buf].offset ==
pinning_offset);
+ igt_assert(exec_object2[buf].offset ==
+ gen8_canonical_addr(pinning_offset));
igt_fail_on_f(*shared_buffer[buf] != buf, \
"Mismatch in buffer %d, iteration %d:
0x%08X\n", \
buf, loop, *shared_buffer[buf]);
@@ -727,10 +741,11 @@ static void gem_softpin_stress_test(void)
STRESS_NUM_BUFFERS + 1, len);
for (loop = 0; loop < STRESS_NUM_LOOPS; loop++) {
submit_and_sync(fd, &execbuf, batch_buf_handle);
- pinning_offset = 0x800000000000;
+ pinning_offset = STRESS_START_ADDRESS;
for(buf = 0; buf < STRESS_NUM_BUFFERS; buf++) {
gem_userptr_sync(fd, shared_handle[buf]);
- igt_assert(exec_object2[buf].offset == pinning_offset);
+ igt_assert(exec_object2[buf].offset ==
+ gen8_canonical_addr(pinning_offset));
igt_fail_on_f(*shared_buffer[buf] != buf, \
"Mismatch in buffer %d, \
iteration %d: 0x%08X\n", buf, loop,
*shared_buffer[buf]);
@@ -837,12 +852,14 @@ static void gem_write_multipage_buffer_test(void)
* This test will request to pin a shared buffer to an invalid
* VMA > 48-bit address if system supports 48B PPGTT; it also
* will test that any attempt of using a 48-bit address requires
- * the SUPPORTS_48B_ADDRESS flag.
+ * the SUPPORTS_48B_ADDRESS flag, and that 48-bit address need to be
+ * in canonical form (bits [63:48] == [47]).
* If system supports 32B PPGTT, it will test the equivalent invalid VMA
* Create shared buffer of size 4K
* Try and Pin object to invalid address
*/
-static void gem_pin_invalid_vma_test(bool test_decouple_flags)
+static void gem_pin_invalid_vma_test(bool test_decouple_flags,
+ bool test_canonical_offset)
{
i915_gem_userptr userptr;
int fd, ret;
@@ -852,6 +869,7 @@ static void gem_pin_invalid_vma_test(bool
test_decouple_flags)
uint32_t shared_buf_handle;
int ring;
uint64_t invalid_address_for_48b = 0x9000000000000; /* 52 bit address */
+ uint64_t noncanonical_address_for_48b = 0xFF0000000000; /* 48 bit
address in noncanonical form */
uint64_t invalid_address_for_32b = 0x900000000; /* 36 bit address */
fd = drm_open_driver(DRIVER_INTEL);
@@ -865,7 +883,11 @@ static void gem_pin_invalid_vma_test(bool
test_decouple_flags)
/* share with GPU */
shared_buf_handle = init_userptr(fd, &userptr, shared_buffer, BO_SIZE);
- if (uses_full_ppgtt(fd, FULL_48_BIT_PPGTT) && !test_decouple_flags) {
+ if (uses_full_ppgtt(fd, FULL_48_BIT_PPGTT) && test_canonical_offset) {
+ setup_exec_obj(&exec_object2[0], shared_buf_handle,
+ EXEC_OBJECT_PINNED |
EXEC_OBJECT_SUPPORTS_48B_ADDRESS,
+ noncanonical_address_for_48b);
+ } else if (uses_full_ppgtt(fd, FULL_48_BIT_PPGTT) &&
!test_decouple_flags) {
setup_exec_obj(&exec_object2[0], shared_buf_handle,
EXEC_OBJECT_PINNED |
EXEC_OBJECT_SUPPORTS_48B_ADDRESS,
invalid_address_for_48b);
@@ -965,7 +987,10 @@ static void gem_pin_high_address_test(void)
* This test will create a shared buffer,
* and create a command for GPU to write data in it. It will attempt
* to pin the buffer at address > 47 bits <= 48-bit.
- * CPU will read and make sure expected value is obtained
+ * CPU will read and make sure expected value is obtained.
+ * Note that we must submit addresses in canonical form, not only
+ * because the addresss will be validated, but also the returned offset
+ * will be in this format.
* Malloc a 4K buffer
* Share buffer with with GPU by using userptr ioctl
@@ -990,7 +1015,7 @@ static void gem_pin_near_48Bit_test(void)
uint32_t batch_buf_handle, shared_buf_handle;
int ring, len;
const uint32_t data = 0x12345678;
- uint64_t high_address;
+ uint64_t high_address, can_high_address;
fd = drm_open_driver(DRIVER_INTEL);
igt_require(uses_full_ppgtt(fd, FULL_48_BIT_PPGTT));
@@ -1007,14 +1032,15 @@ static void gem_pin_near_48Bit_test(void)
for (high_address = BEGIN_HIGH_ADDRESS; high_address <=
END_HIGH_ADDRESS;
high_address+=ADDRESS_INCREMENT) {
+ can_high_address = gen8_canonical_addr(high_address);
/* create command buffer with write command */
- len = gem_store_data_svm(fd, batch_buffer, high_address,
+ len = gem_store_data_svm(fd, batch_buffer, can_high_address,
data, true);
gem_write(fd, batch_buf_handle, 0, batch_buffer, len);
/* submit command buffer */
setup_exec_obj(&exec_object2[0], shared_buf_handle,
EXEC_OBJECT_PINNED |
EXEC_OBJECT_SUPPORTS_48B_ADDRESS,
- high_address);
+ can_high_address);
setup_exec_obj(&exec_object2[1], batch_buf_handle, 0, 0);
ring = I915_EXEC_RENDER;
@@ -1022,7 +1048,7 @@ static void gem_pin_near_48Bit_test(void)
submit_and_sync(fd, &execbuf, batch_buf_handle);
gem_userptr_sync(fd, shared_buf_handle);
- igt_assert(exec_object2[0].offset == high_address);
+ igt_assert(exec_object2[0].offset == can_high_address);
/* check on CPU to see if value changes */
igt_fail_on_f(shared_buffer[0] != data,
"\nCPU read does not match GPU write, expected: 0x%x, \
@@ -1063,12 +1089,15 @@ int main(int argc, char* argv[])
/* Following tests need 32/48 Bit PPGTT support */
igt_subtest("gem_pin_invalid_vma") {
- gem_pin_invalid_vma_test(false);
+ gem_pin_invalid_vma_test(false, false);
}
/* Following tests need 48 Bit PPGTT support */
+ igt_subtest("gen_pin_noncanonical_high_address") {
+ gem_pin_invalid_vma_test(false, true);
+ }
igt_subtest("gem_pin_high_address_without_correct_flag") {
- gem_pin_invalid_vma_test(true);
+ gem_pin_invalid_vma_test(true, false);
}
igt_subtest("gem_softpin_stress") {
gem_softpin_stress_test();
--
2.5.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
