Try to print something useful and helpful for the user.
Signed-off-by: Jani Nikula <jani.nik...@intel.com>
---
tools/intel_bios_reader.c | 43 ++++++++++++++++++++++++-------------------
1 file changed, 24 insertions(+), 19 deletions(-)
diff --git a/tools/intel_bios_reader.c b/tools/intel_bios_reader.c
index 1b1cb6bc8ebf..7c3e1bcaa387 100644
--- a/tools/intel_bios_reader.c
+++ b/tools/intel_bios_reader.c
@@ -851,41 +851,46 @@ static void dump_mipi_config(const struct bdb_block
*block)
static const uint8_t *mipi_dump_send_packet(const uint8_t *data)
{
- uint8_t type, byte, count;
- uint16_t len;
+ uint8_t flags, type;
+ uint16_t len, i;
- byte = *data++;
- /* get packet type and increment the pointer */
+ flags = *data++;
type = *data++;
-
len = *((uint16_t *) data);
data += 2;
- printf("\t\t SEND COMMAND: ");
- printf("0x%x 0x%x 0x%x", byte, type, len);
- for (count = 0; count < len; count++)
- printf(" 0x%x",*(data+count));
+
+ printf("\t\tSend DCS: Port %s, VC %d, %s, Type %02x, Length %u, Data",
+ (flags >> 3) & 1 ? "C" : "A",
+ (flags >> 1) & 3,
+ flags & 1 ? "HS" : "LP",
+ type,
+ len);
+ for (i = 0; i < len; i++)
+ printf(" %02x", *data++);
printf("\n");
- data += len;
+
return data;
}
static const uint8_t *mipi_dump_delay(const uint8_t *data)
{
- printf("\t\t Delay : 0x%x 0x%x 0x%x 0x%x\n", data[0], data[1], data[2],
data[3]);
- data += 4;
- return data;
+ printf("\t\tDelay: %u us\n", *((const uint32_t *)data));
+
+ return data + 4;
}
static const uint8_t *mipi_dump_gpio(const uint8_t *data)
{
- uint8_t gpio, action;
+ uint8_t index, flags;
+
+ index = *data++;
+ flags = *data++;
- printf("\t\t GPIO value:");
- gpio = *data++;
+ printf("\t\tGPIO index %u, source %d, set %d\n",
+ index,
+ (flags >> 1) & 3,
+ flags & 1);
- /* pull up/down */
- action = *data++;
- printf(" 0x%x 0x%x\n", gpio, action);
return data;
}
--
2.1.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
