HI Rob, Thanks for the feedback. Please find my comments inline.
Regards, Dhanya On 12/11/2015 9:05 PM, Rob Bradford wrote:
On Fri, 2015-12-11 at 16:01 +0530, Dhanya Pillai wrote:From: Dhanya <dhanya....@intel.com> This patch will verify color correction capability of a display driver. Gamma/CSC/De-gamma for SKL/BXT supported. Signed-off-by: Dhanya <dhanya....@intel.com> --- tests/.gitignore | 1 + tests/Makefile.sources | 1 + tests/kms_color.c | 684 +++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 686 insertions(+) create mode 100644 tests/kms_color.c diff --git a/tests/.gitignore b/tests/.gitignore index 80af9a7..58c79e2 100644 --- a/tests/.gitignore +++ b/tests/.gitignore @@ -127,6 +127,7 @@ gen7_forcewake_mt kms_3d kms_addfb_basic kms_atomic +kms_color kms_crtc_background_color kms_cursor_crc kms_draw_crc diff --git a/tests/Makefile.sources b/tests/Makefile.sources index 8fb2de8..906c14f 100644 --- a/tests/Makefile.sources +++ b/tests/Makefile.sources @@ -64,6 +64,7 @@ TESTS_progs_M = \ gem_write_read_ring_switch \ kms_addfb_basic \ kms_atomic \ + kms_color \ kms_cursor_crc \ kms_draw_crc \ kms_fbc_crc \ diff --git a/tests/kms_color.c b/tests/kms_color.c new file mode 100644 index 0000000..b5d199b --- /dev/null +++ b/tests/kms_color.c @@ -0,0 +1,684 @@ +/* + * Copyright © 2015 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + */ + +#include <math.h> +#include "drmtest.h" +#include "drm.h" +#include "igt_debugfs.h" +#include "igt_kms.h" +#include "igt_core.h" +#include "intel_io.h" +#include "intel_chipset.h" +#include "igt_aux.h" +#include<unistd.h> +#include<stdlib.h>There are quite a few coding style issues found by checkpatch: https:// patchwork.freedesktop.org/series/989/ perhaps you could run checkpatch.pl locally before sending the next version? nit: spacing & perhaps system headers should be ahead of igt headers (check other file coding style)
Will fix these.
+#include <sys/ioctl.h> +#include <linux/types.h> + + +IGT_TEST_DESCRIPTION("Test Color Features at Pipe level"); +/* +This tool tests the following color features: + 1.csc-red + 2.csc-green + 3.csc-blue + 4.gamma-legacy + 5.gamma-8bit + 6.gamma-10bit + 7.gamma-12bit + 8.gamma-split + +Verification is done by CRC checks. + +*/ + +#define CSC_MAX_VALS 9 +#define GEN9_SPLITGAMMA_MAX_VALS 512 +#define GEN9_8BIT_GAMMA_MAX_VALS 256 +#define GEN9_10BIT_GAMMA_MAX_VALS 1024 +#define GEN9_12BIT_GAMMA_MAX_VALS 513 +#define GEN9_MAX_GAMMA ((1 << 24) - 1) +#define GEN9_MIN_GAMMA 0GEN9? this functionality is currently enabled for BDW onwards (but I think in theory could be enabled for HSW)
Will change GEN9 -> BDW.
+#define RED_CSC 0 +#define GREEN_CSC 1 +#define BLUE_CSC 2 +#define RED_FB 0 +#define GREEN_FB 1 +#define BLUE_FB 2 + +struct _drm_r32g32b32 { + __u32 r32; + __u32 g32; + __u32 b32; + __u32 reserved; +}; + +struct _drm_palette { + struct _drm_r32g32b32 lut[0]; +}; + +struct _drm_ctm { + __s64 ctm_coeff[9]; +}; +Surround these structure definitions with #ifndefs so that this continues to work when librdrm gets updated.
Will fix this.
+float ctm_red[9] = {1, 1, 1, 0, 0, 0, 0, 0, 0}; +float ctm_green[9] = {0, 0, 0, 1, 1, 1, 0, 0, 0}; +float ctm_blue[9] = {0, 0, 0, 0, 0, 0, 1, 1, 1}; +float ctm_unity[9] = {1, 0, 0, 0, 1, 0, 0, 0, 1};These are only used in this file, and never changed: -> static const. s/unity/identity/ (I think unity is the wrong terminology here.) I'd like to see versions of the CTM tests that: a.) Test with negative coefficients b.) With fractional coeffecients (on BDW the the coefficients are stored in a funky pseudo fp format. Testing some of those are essential (testing all even better.) c.) Swapping red with green would be a good test too.
Will add these tests.
+struct framebuffer_color { + int red; + int green; + int blue; +}; +struct framebuffer_color fb_color = {0,0,0};Maybe name this fb_color_black ?
This is just the initialization of the fb.
+ +igt_crc_t crc_reference, crc_reference_black, crc_reference_white; +igt_crc_t crc_black, crc_white, crc_current;static ^
Will fix this.
+struct data_t { + int fb_initial; + int drm_fd; + int gen; + int w, h; + igt_display_t display; + struct igt_fb fb_prep; + struct igt_fb fb, fb1; + igt_pipe_crc_t *pipe_crc; + enum pipe pipe; + +}; + + +static int create_blob(int fd, uint64_t *data, int length) +{ + struct drm_mode_create_blob blob; + int ret = -1; + + blob.data = (uint64_t)data; + blob.length = length; + blob.blob_id = -1; + ret = ioctl(fd, DRM_IOCTL_MODE_CREATEPROPBLOB, &blob); + if (!ret) + return blob.blob_id; + igt_fail(IGT_EXIT_FAILURE); + return ret; +} + +static void prepare_crtc(struct data_t *data, igt_output_t *output, + enum pipe pipe1, igt_plane_t *plane, drmModeModeInfo *mode, + enum igt_commit_style s) +{ + igt_display_t *display = &data->display; + + igt_output_set_pipe(output, pipe1); + + igt_pipe_crc_free(data->pipe_crc); + data->pipe_crc = igt_pipe_crc_new(pipe1, INTEL_PIPE_CRC_SOURCE_AUTO); + + /* before allocating, free if any older fb */ + if (data->fb_initial) { + igt_remove_fb(data->drm_fd, &data->fb_prep); + data->fb_initial = 0; + } + + /* allocate fb for plane 1 */ + data->fb_initial = igt_create_color_fb(data->drm_fd, + mode->hdisplay, mode-vdisplay,+ DRM_FORMAT_XRGB8888, + LOCAL_I915_FORMAT_MOD _X_TILED, /* tiled */ + fb_color.red, fb_color.green, fb_color.blue, + &data->fb_prep); + igt_assert(data->fb_initial); + + igt_plane_set_fb(plane, &data->fb_prep); + + igt_display_commit2(display, s); +} + +static void cleanup_fb(struct data_t *data) +{ + + if (data->fb_initial) { + igt_remove_fb(data->drm_fd, &data->fb_prep); + data->fb_initial = 0; + } + if (data->fb.fb_id) + igt_remove_fb(data->drm_fd, &data->fb); + +} + +static void cleanup_crtc(struct data_t *data, igt_output_t *output, + igt_plane_t *plane) +{ + igt_display_t *display = &data->display; + + if (!plane->is_primary) { + igt_plane_t *primary; + + primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY); + igt_plane_set_fb(primary, NULL); + } + + igt_plane_set_fb(plane, NULL); + igt_output_set_pipe(output, PIPE_ANY); +> igt_display_commit2(display, COMMIT_UNIVERSAL); + +} + +static int get_color_property(int drm_fd, int id, int object,const char *prop_name, + int blob_id) +{ + int i = 0, ret = 0; + drmModeObjectPropertiesPtr props = NULL; + igt_fail_on_f(id < 0 || ((object != DRM_MODE_OBJECT_CRTC) && + (object != DRM_MODE_OBJECT_PLANE)), + "Invalid input to get color property %d", id); + + props = drmModeObjectGetProperties(drm_fd, id, object); + igt_fail_on_f(!props, + "\nNo property for object id=%d\n", id); + for (i = 0; i < props->count_props; i++) { + drmModePropertyPtr prop = drmModeGetProperty(drm_fd, + props-props[i]);+ if (strcmp(prop->name, prop_name) == 0) { + blob_id = props->prop_values[i]; + break; + } + drmModeFreeProperty(prop); + } + + ret = blob_id; + drmModeFreeObjectProperties(props); + igt_fail_on_f(i == props->count_props, + "%s No such property\n", prop_name); + return ret; +} + + +static int set_color_property(int drm_fd, int id, int object, const char *prop_name, int blob_id) +{ + int i = 0, res; + + drmModeObjectPropertiesPtr props = NULL; + igt_fail_on_f(id < 0 || ((object != DRM_MODE_OBJECT_CRTC) && + (object != DRM_MODE_OBJECT_PLANE)), + "Invalid input to get color property %d", id); + + + props = drmModeObjectGetProperties(drm_fd, id, object); + igt_fail_on_f(!props, + "\nNo property for object id=%d\n", id); + for (i = 0; i < props->count_props; i++) { + drmModePropertyPtr prop = drmModeGetProperty(drm_fd, + props-props[i]);+ if (strcmp(prop->name, prop_name) == 0) { + res = drmModeObjectSetProperty(drm_fd, id, object, + (uint32_t)pro p->prop_id, blob_id); + + if (res) { + drmModeFreeProperty(prop); + drmModeFreeObjectProperties(props); + } else { + drmModeFreeProperty(prop); + break; + } + } + + drmModeFreeProperty(prop); + } + drmModeFreeObjectProperties(props); + igt_fail_on_f(i == props->count_props, + "%s No such property\n", prop_name); + return 0; +} + +static int64_t convertFloatToBinary(double input) +{ + + int integer_part, count = 0; + uint32_t temp_ip, frac_val = 0x00000000; + uint64_t integer_val = 0x00000000; + int64_t value = 0x0000000000000000; + float fractional_part, ip; + integer_part = (int)input; + fractional_part = input - integer_part; + while (fractional_part != 0.000000) { + ip = fractional_part * 16; + temp_ip = (int)(fractional_part * 16); + frac_val = frac_val | (temp_ip << (28 - count * 4)); + count++; + fractional_part = ip - temp_ip; + } + integer_val = integer_part; + value = value | (integer_val << 32); + value = value | frac_val; + return value; +Given the truncation by the HW, I think you can replace this with input * (1ull << 32). (I think...)
Can you clarify more.
+ +} + +static void write_gamma_lut( uint32_t num_samples, struct _drm_r32g32b32 *gamma_ptr, int unit_gamma ) +{ + unsigned short Red, Green, Blue; + uint32_t r32, b32, g32; + uint64_t i, val; + + for (i = 0; i < num_samples; i++) { + if(unit_gamma == 0) { + Blue = GEN9_MAX_GAMMA; + Green = GEN9_MAX_GAMMA; + Red = GEN9_MAX_GAMMA; + } else { + Blue = GEN9_MIN_GAMMA; + Green = GEN9_MIN_GAMMA; + Red = GEN9_MIN_GAMMA; + } + r32 = Red; + g32 = Green; + b32 = Blue; + r32 <<=8; + g32 <<=8; + b32 <<=8; + gamma_ptr[i].r32 = r32; + gamma_ptr[i].g32 = g32; + gamma_ptr[i].b32 = b32; + } +} + +static uint64_t get_blob(int fd, int blob_id, int length) +{ + struct drm_mode_get_blob blob; + int ret = 0; + + blob.blob_id = blob_id; + blob.length = length; + blob.data = (uint64_t)malloc(blob.length); + ret = ioctl(fd, DRM_IOCTL_MODE_GETPROPBLOB, &blob); + + if (ret) + igt_info("GET BLOB Failed\n"); + + return blob.data; +} + +static void enable_plane(struct data_t *data, igt_display_t *display, igt_output_t *output , int pipe1) +{ + enum igt_commit_style commit; + enum pipe pipe2; + int width, height; + uint32_t pixelformat = DRM_FORMAT_XRGB8888; + + commit = COMMIT_UNIVERSAL; + for_each_connected_output(display, output) { + drmModeModeInfo *mode; + igt_plane_t *plane; + pipe2 = output->config.pipe; + + if (pipe2 != pipe1) + break; + igt_output_set_pipe(output, pipe2); + mode = igt_output_get_mode(output); + /*Draw the initial primary plane*/ + plane = igt_output_get_plane(output, IGT_PLANE_PRIMARY); + + prepare_crtc(data, output, pipe2, plane, mode, commit); + /*Random Size Buffer Creation */ + width = 600; + height = 600; + + plane = igt_output_get_plane(output, IGT_PLANE_2); + igt_create_color_fb(data->drm_fd, + width, height, + pixelformat, + LOCAL_DRM_FORMAT_MOD_NON E, + fb_color.red,fb_color.gr een,fb_color.blue, + &data->fb); + igt_plane_set_position(plane, 100, 100); + + igt_plane_set_fb(plane, &data->fb); + igt_display_commit2(display, commit); + } + +} +/* +This function verify csc feature using both CRC check. +Steps followed are: + 1.Enable plane for capturing reference CRC + 2.Capture Reference CRC + 3.Apply CSC on Pipe + 4.Enable Plane .CSC will be applied on this planes. + 5.Capture CRC and compare with reference CRC + 6. Register Validation for CRC +*/ +static void test_pipe_csc(struct data_t *data, igt_display_t *display, igt_output_t *output, + igt_plane_t *plane, bool enable, int value, int pipe1) +{ + + struct _drm_ctm *ctm_data = NULL; + bool ret = false; + int res, i, blob_id; + float *ctm; + uint64_t blob_address; + ctm_data = (struct _drm_ctm *) + malloc(sizeof(struct _drm_ctm)); + if (!enable) { + ctm = ctm_unity; + } else { + if (value == RED_CSC) { + ctm = ctm_red; + } else if (value == GREEN_CSC) { + ctm = ctm_green; + } else if (value == BLUE_CSC) { + ctm = ctm_blue; + } else{ + ctm = ctm_unity; + } } + if(value == RED_FB) { + fb_color.red = 1; + fb_color.green =0; + fb_color.blue = 0; + } else if(value == GREEN_FB) { + fb_color.red = 0; + fb_color.green = 1; + fb_color.blue = 0; + } else if(value == BLUE_FB) { + fb_color.red = 0; + fb_color.green = 0; + fb_color.blue = 1; + } else { + fb_color.red = 1; + fb_color.green = 1; + fb_color.blue = 1; + } + /*Enable planes and capture reference crc*/ + enable_plane(data, display, output, pipe1); + igt_pipe_crc_collect_crc(data->pipe_crc, &crc_reference); + + fb_color.red = 1; + fb_color.green = 1; + fb_color.blue = 1; + + enable_plane(data, display, output, pipe1); + + for (i = 0; i < CSC_MAX_VALS; i++) { + ctm_data->ctm_coeff[i] = convertFloatToBinary(*(ctm + i)); + } + + blob_id = create_blob(display->drm_fd, + (int *)(ctm_data), sizeof(struct _drm_ctm)); + igt_fail_on_f (blob_id < 0, "CTM:BLOB IOCTL Fail\n"); + res = set_color_property(display->drm_fd, output-config.crtc->crtc_id,+ DRM_MODE_OBJECT_CRTC, "CTM", blob_id); + igt_fail_on_f (res < 0, "CTM:Set Property Failed\n"); + res = get_color_property(display->drm_fd, output-config.crtc->crtc_id, DRM_MODE_OBJECT_CRTC, "CTM", blob_id);+ igt_fail_on_f (res < 0, "CTM:Get Property Failed\n"); + + blob_address = get_blob(display->drm_fd, res, sizeof(struct _drm_ctm)); + ctm_data = (struct _drm_ctm *) (intptr_t) blob_address; + + enable_plane(data, display, output, pipe1); + igt_pipe_crc_collect_crc(data->pipe_crc, &crc_current); + igt_assert_crc_equal(&crc_reference, &crc_current); + /*Restoring the Unit CSC*/ + ctm = ctm_unity; + for (i = 0; i < CSC_MAX_VALS; i++) { + ctm_data->ctm_coeff[i] = convertFloatToBinary(*(ctm + i)); + } + + blob_id = create_blob(display->drm_fd, + (int *)(ctm_data), sizeof(struct _drm_ctm)); + igt_fail_on_f (blob_id < 0, "CTM:BLOB IOCTL Fail\n"); + + res = set_color_property(display->drm_fd, output-config.crtc->crtc_id,+ DRM_MODE_OBJECT_CRTC, "CTM", blob_id); + igt_fail_on_f (res < 0, "CTM:Set Property Failed\n"); + + free(ctm_data); + +} + + +static void apply_gamma(struct data_t *data, igt_display_t *display, igt_output_t *output, int pipe1, uint32_t num_samples, int unit_gamma) +{ + struct _drm_palette *gamma_data = NULL; + int ret, res, blob_id, blob_length; + bool status = false; + + + if (num_samples == 0) + blob_length = 1; + else + blob_length = (sizeof(struct _drm_palette) + (num_samples * sizeof(struct _drm_r32g32b32))); + + gamma_data = malloc(blob_length); + write_gamma_lut(num_samples, gamma_data->lut, unit_gamma); + blob_id = create_blob(display->drm_fd, (uint64_t *)(gamma_data), blob_length); + if (blob_id < 0) + free(gamma_data); + + igt_fail_on_f (blob_id < 0, "GAMMA:BLOB IOCTL Fail\n"); + /*Disabling degamma*/ + if(unit_gamma == 2 ) { + res = set_color_property(display->drm_fd, output-config.crtc->crtc_id,+ DRM_MODE_OBJECT_CRTC, "PALETTE_BEFORE_CTM", blob_id); + ret = get_color_property(display->drm_fd, output-config.crtc->crtc_id,+ DRM_MODE_OBJECT_CRTC, "PALETTE_BEFORE_CTM", blob_id); + igt_fail_on_f (res < 0, "PALETTE_BEFORE_CTM:Set Property Failed\n"); + igt_fail_on_f (ret < 0, "PALETTE_BEFORE_CTM:Set Property Failed\n"); + + } + + if (num_samples == GEN9_SPLITGAMMA_MAX_VALS) { + res = set_color_property(display->drm_fd, output-config.crtc->crtc_id,+ DRM_MODE_OBJECT_CRTC, "PALETTE_BEFORE_CTM", blob_id); + ret = get_color_property(display->drm_fd, output-config.crtc->crtc_id,+ DRM_MODE_OBJECT_CRTC, "PALETTE_BEFORE_CTM", blob_id); + if (res < 0) + free(gamma_data); + igt_fail_on_f (res < 0, "PALETTE_BEFORE_CTM:Set Property Failed\n"); + igt_fail_on_f (ret < 0, "PALETTE_BEFORE_CTM:Set Property Failed\n"); + + } + + res = set_color_property(display->drm_fd, output-config.crtc->crtc_id,+ DRM_MODE_OBJECT_CRTC, "PALETTE_AFTER_CTM", blob_id); + if (res < 0) { + free(gamma_data); + } + igt_fail_on_f (res < 0, "PALETTE_AFTER_CTM:Set Property Failed\n"); + + ret = get_color_property(display->drm_fd, output-config.crtc->crtc_id,+ DRM_MODE_OBJECT_CRTC, "PALETTE_AFTER_CTM", blob_id); + if (ret < 0) { + free(gamma_data); + } + igt_fail_on_f (ret < 0, "PALETTE_BEFORE_CTM:Set Property Failed\n"); + + free(gamma_data); + + +} +/* +This function verify csc feature using both CRC check. +Steps followed are: + 1.Enable Black plane and capture CRC_REFERENCE_BLACK. + 2.Enable White plane and capture CRS_REFERENCE_WHITE + 3.Enable Red plane. + 4.Apply LOW Gamma. + 5.Capture CRC_Black. + 6.Apply High Gamma and capture CRC_White. + 7.CRC_Black should be equivalent to CRC_REFERENCE_BLACK + 8.CRC_White should be equivalent to CRC_REFERENCE_WHite. + + +*/ +static void test_pipe_gamma(struct data_t *data, igt_display_t *display, igt_output_t *output, + uint32_t num_samples, int values, int pipe1) +{ + int unit_gamma, disable_gamma; + igt_plane_t *plane; + + /*Enable black planes and capture reference crc*/ + + fb_color.red = 0; + fb_color.green =0; + fb_color.blue = 0; + enable_plane(data, display, output, pipe1); + igt_pipe_crc_collect_crc(data->pipe_crc, &crc_reference_black); + /*Enable white plane and capture refernce crc*/ + fb_color.red = 1; + fb_color.green =1; + fb_color.blue = 1; + enable_plane(data, display, output, pipe1); + igt_pipe_crc_collect_crc(data->pipe_crc, &crc_reference_white); + + /*Enable red planes and apply unit gamma*/ + fb_color.red = 1; + fb_color.green =0; + fb_color.blue = 0; + unit_gamma = 0; /*0 -> white 1->black*/Take the CRC here too, as reference_red and check that crc_white != reference_red. (i.e. check its changed)
As suggested by Daniel , not adding this check here.
+ apply_gamma(data, display, output, pipe1, num_samples, unit_gamma); + enable_plane(data, display, output, pipe1); + igt_pipe_crc_collect_crc(data->pipe_crc, &crc_white); + + /* Apply 0x0 gamma */ + unit_gamma = 1; + + apply_gamma(data, display, output, pipe1, num_samples, unit_gamma); + enable_plane(data, display, output, pipe1); + igt_pipe_crc_collect_crc(data->pipe_crc, &crc_black); + igt_assert_crc_equal(&crc_reference_black, &crc_black); + igt_assert_crc_equal(&crc_reference_white, &crc_white); + + /*Disabling gamma*/ + if( num_samples == GEN9_SPLITGAMMA_MAX_VALS) { + disable_gamma = 2; + apply_gamma(data, display, output, pipe1, 0, disable_gamma); + } else { + apply_gamma(data, display, output, pipe1, 0, unit_gamma); + } + + + + +} + +static void test_legacy_gamma (struct data_t *data, igt_display_t *display, igt_output_t *output, int pipe1) +{ + int fd,ret,i; + + uint32_t crtc; + uint16_t *val = malloc(sizeof(uint16_t) * 256); + igt_plane_t *plane; + + fb_color.red = 1; + fb_color.green =1; + fb_color.blue = 1; + enable_plane(data, display, output, pipe1);nit: coding style (spacing)
Will fix this.
+ float gamma1 = 1.0;Need to do more that test with a linear gamma, as that is default initialised in the kernel.
We are doing only negative testing for legacy gamma.This patch is only meant for Color Manager 3.0 . If required , will add another patch which
does testing for legacy.
+ for(i = 0; i < 256 ; i++) { + val[i] = 0xffff * pow((i/255), gamma1); + + } + for_each_connected_output (display, output) { + ret = drmModeCrtcSetGamma (display->drm_fd, output-config.crtc->crtc_id, 256, val, val, val);+ igt_assert_lte(0, ret);Also, need to do more that check return value. I recommend taking the CRC with 0xff red FB. Then mapping 0xff red (last entry) to 0xf0 and then comparing. And the same with other channels and more colours.+ } +} + +static void test_pipe_color(struct data_t *data, const char *prop_name, int enable, int value)Replace prop_name with an enum. Then you can replace all the strcmp()s with a switch!
Will add this.
+{ + igt_display_t *display = &data->display; + igt_output_t *output; + igt_plane_t *plane; + enum pipe pipe1; + + for_each_connected_output(display, output) { + pipe1 = output->config.pipe; + igt_output_set_pipe(output,pipe1); + if ((strcmp(prop_name, "gamma_property_8bit") == 0) && + enable == true){ + test_pipe_gamma(data, display, output, + GEN9_8BIT_GAMMA_MAX_VALS, value, pipe1); + } else if ((strcmp(prop_name, "legacy_gamma") == 0)){ + test_legacy_gamma(data, display, output, pipe1); + } else if ((strcmp(prop_name, "gamma_property_10bit") == 0) && + enable == true) { + test_pipe_gamma(data, display, output, GEN9_10BIT_GAMMA_MAX_VALS, value, pipe1); + } else if ((strcmp(prop_name, "csc_property") == 0)) { + test_pipe_csc(data, display, output, plane, enable, value, pipe1); + } else if ((strcmp(prop_name, "gamma_property_split") == 0) && + enable == true) { + test_pipe_gamma(data, display, output, + GEN9_SPLITGAMMA_MAX_VALS, value, pipe1); + } else if ((strcmp(prop_name, "gamma_property_12bit") == 0) && enable == true) { + test_pipe_gamma(data, display, output, + GEN9_12BIT_GAMMA_MAX_VALS, value, pipe1); + } else { + igt_info("Invalid Test\n"); + } + cleanup_fb(data); + plane = igt_output_get_plane(output, IGT_PLANE_2); + cleanup_crtc(data, output, plane); + } +} + +igt_main +{ + struct data_t data = {}; + int values = 1; + igt_skip_on_simulation(); + igt_fixture{ + // data.drm_fd = drm_open_driver_master(DRIVER_INTEL);Left over debugging comment?
My bad. WIll remove.
+ data.drm_fd = drm_open_any_master(); + kmstest_set_vt_graphics_mode(); + igt_display_init(&data.display, data.drm_fd); + data.gen = intel_gen(intel_get_drm_devid(data.drm_fd)); + igt_require(data.gen >= 9);9? This feature is enabled from BDW onwards atm, but is possible on HSW. Can we instead check for the CTM property?
Will remove this check and add for CTM property.
+ } + igt_subtest_f("csc-red") + test_pipe_color(&data, "csc_property", true, RED_CSC); + igt_subtest_f("csc-green") + test_pipe_color(&data, "csc_property", true, GREEN_CSC); + igt_subtest_f("csc-blue") + test_pipe_color(&data, "csc_property", true, BLUE_CSC); + igt_subtest_f("gamma-legacy") + test_pipe_color(&data, "legacy_gamma", true, values); + + igt_subtest_f("gamma-8bit") + test_pipe_color(&data, "gamma_property_8bit", true, values); + igt_subtest_f("gamma-10bit") + test_pipe_color(&data, "gamma_property_10bit", true, values); + igt_subtest_f("gamma-12bit") + test_pipe_color(&data, "gamma_property_12bit", true, values); + igt_subtest_f("gamma-split") + test_pipe_color(&data, "gamma_property_split", true, values); + + igt_fixture{ + igt_display_fini(&data.display); + } +} + _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/intel-gfx
