On Wed, Dec 09, 2015 at 03:54:33PM +0200, Ville Syrjälä wrote:
> On Wed, Dec 09, 2015 at 08:14:04PM +0530, Deepak M wrote:
> > Pipe is assigned based on the port, but it should be
> > based on current crtc. Correcting the same in this patch.
> >
> > v2: Use macro BXT_PIPE_SELECT(pipe) (Daniel)
> >
> > Signed-off-by: Deepak M <m.dee...@intel.com>
> > ---
> > drivers/gpu/drm/i915/i915_reg.h | 4 +---
> > drivers/gpu/drm/i915/intel_dsi.c | 15 +++------------
> > 2 files changed, 4 insertions(+), 15 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > b/drivers/gpu/drm/i915/i915_reg.h
> > index fa72be9..91dbb32 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -8103,9 +8103,7 @@ enum skl_disp_power_wells {
> > #define RGB_FLIP_TO_BGR (1 << 2)
> >
> > #define BXT_PIPE_SELECT_MASK (7 << 7)
> > -#define BXT_PIPE_SELECT_C (2 << 7)
> > -#define BXT_PIPE_SELECT_B (1 << 7)
> > -#define BXT_PIPE_SELECT_A (0 << 7)
> > +#define BXT_PIPE_SELECT(pipe) ((pipe) << 7)
> >
> > /* BXT has dual link Z inversion overlap field */
> > #define BXT_PIXEL_OVERLAP_CNT_MASK (0xf << 10)
> > diff --git a/drivers/gpu/drm/i915/intel_dsi.c
> > b/drivers/gpu/drm/i915/intel_dsi.c
> > index f5df49b..12cfcf5 100644
> > --- a/drivers/gpu/drm/i915/intel_dsi.c
> > +++ b/drivers/gpu/drm/i915/intel_dsi.c
> > @@ -898,21 +898,12 @@ static void intel_dsi_prepare(struct intel_encoder
> > *intel_encoder)
> > I915_WRITE(MIPI_CTRL(port), tmp |
> > READ_REQUEST_PRIORITY_HIGH);
> > } else if (IS_BROXTON(dev)) {
> > - /*
> > - * FIXME:
> > - * BXT can connect any PIPE to any MIPI port.
> > - * Select the pipe based on the MIPI port read from
> > - * VBT for now. Pick PIPE A for MIPI port A and C
> > - * for port C.
> > - */
> > + enum pipe pipe = intel_crtc->pipe;
> > +
> > tmp = I915_READ(MIPI_CTRL(port));
> > tmp &= ~BXT_PIPE_SELECT_MASK;
> >
> > - if (port == PORT_A)
> > - tmp |= BXT_PIPE_SELECT_A;
> > - else if (port == PORT_C)
> > - tmp |= BXT_PIPE_SELECT_C;
> > -
> > + tmp |= BXT_PIPE_SELECT(pipe);
> > I915_WRITE(MIPI_CTRL(port), tmp);
>
> Reviewed-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
>
> There's way too much RMW going on in the DSI code though. Someone should
> probably do something about it.
Yeah that'd be nice.
Queued for -next, thanks for the patch.
-Daniel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
