On Thu, Nov 26, 2015 at 09:41:36AM +0100, Daniel Vetter wrote:
> On Wed, Nov 25, 2015 at 04:35:31PM +0200, ville.syrj...@linux.intel.com wrote:
> > From: Ville Syrjälä <ville.syrj...@linux.intel.com>
> >
> > DPLL_SDVO_HIGH_SPEED must be set for SDVO/HDMI/DP, but nowhere is it
> > forbidden to set it for LVDS/CRT as well. So let's move it out of the
> > ironlake_compute_dpll() and just do it on demand in the pll enable hook.
> > This allows the PLL to be shared in more cases when dealing with
> > different output types.
>
> Nowhere is it forbidden feels a bit weak ... what's the benefits? Do we
> really care?
We get to share the PLL eg. between HDMI and VGA. We already do that
anyway if we clone HDMI+VGA. Othwerwise we always run out of PLLs when
trying to do three pipes with something like VGA+HDMI+DP.
> -Daniel
>
> >
> > Note that we must now call the pll enable hook regarless of the current
> > pll state, so that DPLL_SDVO_HIGH_SPEED gets updated appropriately.
> >
> > FIXME: maybe better to add a separate hook for the "pll already enabled"
> > case?
> >
> > Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_display.c | 29 +++++++++++++++++++++--------
> > 1 file changed, 21 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_display.c
> > b/drivers/gpu/drm/i915/intel_display.c
> > index 26cafeea2845..ae58f1105458 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -1908,6 +1908,8 @@ static void intel_enable_shared_dpll(struct
> > intel_crtc *crtc)
> > if (pll->active++) {
> > WARN_ON(!pll->on);
> > assert_shared_dpll_enabled(dev_priv, pll);
> > + /* to update high speed IO clock state */
> > + pll->enable(dev_priv, pll);
> > return;
> > }
> > WARN_ON(pll->on);
> > @@ -8942,11 +8944,6 @@ static uint32_t ironlake_compute_dpll(struct
> > intel_crtc *intel_crtc,
> > dpll |= (crtc_state->pixel_multiplier - 1)
> > << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
> >
> > - if (is_sdvo)
> > - dpll |= DPLL_SDVO_HIGH_SPEED;
> > - if (crtc_state->has_dp_encoder)
> > - dpll |= DPLL_SDVO_HIGH_SPEED;
> > -
> > /* compute bitmask from p1 value */
> > dpll |= (1 << (crtc_state->dpll.p1 - 1)) <<
> > DPLL_FPA01_P1_POST_DIV_SHIFT;
> > /* also FPA1 */
> > @@ -13626,7 +13623,7 @@ static bool ibx_pch_dpll_get_hw_state(struct
> > drm_i915_private *dev_priv,
> > return false;
> >
> > val = I915_READ(PCH_DPLL(pll->id));
> > - hw_state->dpll = val;
> > + hw_state->dpll = val & ~DPLL_SDVO_HIGH_SPEED;
> > hw_state->fp0 = I915_READ(PCH_FP0(pll->id));
> > hw_state->fp1 = I915_READ(PCH_FP1(pll->id));
> >
> > @@ -13643,10 +13640,26 @@ static void ibx_pch_dpll_mode_set(struct
> > drm_i915_private *dev_priv,
> > static void ibx_pch_dpll_enable(struct drm_i915_private *dev_priv,
> > struct intel_shared_dpll *pll)
> > {
> > + struct drm_device *dev = dev_priv->dev;
> > + struct intel_crtc *crtc;
> > + u32 dpll = pll->config.hw_state.dpll;
> > +
> > + /* Configure high speed IO clock as needed */
> > + for_each_intel_crtc(dev, crtc) {
> > + if (intel_crtc_to_shared_dpll(crtc) == pll &&
> > + crtc->config->base.active &&
> > + (crtc->config->has_dp_encoder ||
> > + intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ||
> > + intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))) {
> > + dpll |= DPLL_SDVO_HIGH_SPEED;
> > + break;
> > + }
> > + }
> > +
> > /* PCH refclock must be enabled first */
> > ibx_assert_pch_refclk_enabled(dev_priv);
> >
> > - I915_WRITE(PCH_DPLL(pll->id), pll->config.hw_state.dpll);
> > + I915_WRITE(PCH_DPLL(pll->id), dpll);
> >
> > /* Wait for the clocks to stabilize. */
> > POSTING_READ(PCH_DPLL(pll->id));
> > @@ -13657,7 +13670,7 @@ static void ibx_pch_dpll_enable(struct
> > drm_i915_private *dev_priv,
> > *
> > * So write it again.
> > */
> > - I915_WRITE(PCH_DPLL(pll->id), pll->config.hw_state.dpll);
> > + I915_WRITE(PCH_DPLL(pll->id), dpll);
> > POSTING_READ(PCH_DPLL(pll->id));
> > udelay(200);
> > }
> > --
> > 2.4.10
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
