From: Ville Syrjälä <ville.syrj...@linux.intel.com>
Store the DVO SRCDIM register offset alongside the DVO control register
offset in intel_dvo_device. This gets rid of the switch statement whose
case values are the DVO control register offsets. Such a construct would
cause problems for register type safety.
Signed-off-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
---
drivers/gpu/drm/i915/dvo.h | 1 +
drivers/gpu/drm/i915/intel_dvo.c | 23 +++++++++--------------
2 files changed, 10 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/i915/dvo.h b/drivers/gpu/drm/i915/dvo.h
index 0e2c1b9..20873d6 100644
--- a/drivers/gpu/drm/i915/dvo.h
+++ b/drivers/gpu/drm/i915/dvo.h
@@ -33,6 +33,7 @@ struct intel_dvo_device {
int type;
/* DVOA/B/C output register */
u32 dvo_reg;
+ u32 dvo_srcdim_reg;
/* GPIO register used for i2c bus to control this device */
u32 gpio;
int slave_addr;
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 8492053..3d31d84 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -44,6 +44,7 @@ static const struct intel_dvo_device intel_dvo_devices[] = {
.type = INTEL_DVO_CHIP_TMDS,
.name = "sil164",
.dvo_reg = DVOC,
+ .dvo_srcdim_reg = DVOC_SRCDIM,
.slave_addr = SIL164_ADDR,
.dev_ops = &sil164_ops,
},
@@ -51,6 +52,7 @@ static const struct intel_dvo_device intel_dvo_devices[] = {
.type = INTEL_DVO_CHIP_TMDS,
.name = "ch7xxx",
.dvo_reg = DVOC,
+ .dvo_srcdim_reg = DVOC_SRCDIM,
.slave_addr = CH7xxx_ADDR,
.dev_ops = &ch7xxx_ops,
},
@@ -58,6 +60,7 @@ static const struct intel_dvo_device intel_dvo_devices[] = {
.type = INTEL_DVO_CHIP_TMDS,
.name = "ch7xxx",
.dvo_reg = DVOC,
+ .dvo_srcdim_reg = DVOC_SRCDIM,
.slave_addr = 0x75, /* For some ch7010 */
.dev_ops = &ch7xxx_ops,
},
@@ -65,6 +68,7 @@ static const struct intel_dvo_device intel_dvo_devices[] = {
.type = INTEL_DVO_CHIP_LVDS,
.name = "ivch",
.dvo_reg = DVOA,
+ .dvo_srcdim_reg = DVOA_SRCDIM,
.slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */
.dev_ops = &ivch_ops,
},
@@ -72,6 +76,7 @@ static const struct intel_dvo_device intel_dvo_devices[] = {
.type = INTEL_DVO_CHIP_TMDS,
.name = "tfp410",
.dvo_reg = DVOC,
+ .dvo_srcdim_reg = DVOC_SRCDIM,
.slave_addr = TFP410_ADDR,
.dev_ops = &tfp410_ops,
},
@@ -79,6 +84,7 @@ static const struct intel_dvo_device intel_dvo_devices[] = {
.type = INTEL_DVO_CHIP_LVDS,
.name = "ch7017",
.dvo_reg = DVOC,
+ .dvo_srcdim_reg = DVOC_SRCDIM,
.slave_addr = 0x75,
.gpio = GMBUS_PIN_DPB,
.dev_ops = &ch7017_ops,
@@ -87,6 +93,7 @@ static const struct intel_dvo_device intel_dvo_devices[] = {
.type = INTEL_DVO_CHIP_TMDS,
.name = "ns2501",
.dvo_reg = DVOB,
+ .dvo_srcdim_reg = DVOB_SRCDIM,
.slave_addr = NS2501_ADDR,
.dev_ops = &ns2501_ops,
}
@@ -255,20 +262,8 @@ static void intel_dvo_pre_enable(struct intel_encoder
*encoder)
struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
int pipe = crtc->pipe;
u32 dvo_val;
- u32 dvo_reg = intel_dvo->dev.dvo_reg, dvo_srcdim_reg;
-
- switch (dvo_reg) {
- case DVOA:
- default:
- dvo_srcdim_reg = DVOA_SRCDIM;
- break;
- case DVOB:
- dvo_srcdim_reg = DVOB_SRCDIM;
- break;
- case DVOC:
- dvo_srcdim_reg = DVOC_SRCDIM;
- break;
- }
+ u32 dvo_reg = intel_dvo->dev.dvo_reg;
+ u32 dvo_srcdim_reg = intel_dvo->dev.dvo_srcdim_reg;
/* Save the data order, since I don't know what it should be set to. */
dvo_val = I915_READ(dvo_reg) &
--
2.4.10
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
