On Thu, Aug 27, 2015 at 03:44:05PM +0200, Maarten Lankhorst wrote:
> Instead of doing a hack during primary plane commit the state
> is updated during atomic evasion. It handles differences in
> pipe size and the panel fitter.
>
> This is continuing on top of Daniel's work to make faster
> modesets atomic, and not yet enabled by default.
>
> Signed-off-by: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
> ---
> drivers/gpu/drm/i915/intel_atomic.c | 2 +-
> drivers/gpu/drm/i915/intel_display.c | 110
> ++++++++++++++++++++++-------------
> drivers/gpu/drm/i915/intel_drv.h | 2 +
> 3 files changed, 72 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_atomic.c
> b/drivers/gpu/drm/i915/intel_atomic.c
> index 9336e8030980..8287b81287a0 100644
> --- a/drivers/gpu/drm/i915/intel_atomic.c
> +++ b/drivers/gpu/drm/i915/intel_atomic.c
> @@ -98,8 +98,8 @@ intel_crtc_duplicate_state(struct drm_crtc *crtc)
> return NULL;
>
> __drm_atomic_helper_crtc_duplicate_state(crtc, &crtc_state->base);
> -
> crtc_state->base.crtc = crtc;
> + crtc_state->update_pipe = false;
>
> return &crtc_state->base;
> }
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index 7b5dfe2f7b2d..d3874a68cdb9 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -108,6 +108,9 @@ static void skl_init_scalers(struct drm_device *dev,
> struct intel_crtc *intel_cr
> struct intel_crtc_state *crtc_state);
> static int i9xx_get_refclk(const struct intel_crtc_state *crtc_state,
> int num_connectors);
> +static void skylake_pfit_enable(struct intel_crtc *crtc);
> +static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force);
> +static void ironlake_pfit_enable(struct intel_crtc *crtc);
> static void intel_modeset_setup_hw_state(struct drm_device *dev);
>
> typedef struct {
> @@ -3305,14 +3308,20 @@ static bool intel_crtc_has_pending_flip(struct
> drm_crtc *crtc)
> return pending;
> }
>
> -static void intel_update_pipe_size(struct intel_crtc *crtc)
> +static void intel_update_pipe_config(struct intel_crtc *crtc,
> + struct intel_crtc_state *old_crtc_state)
> {
> struct drm_device *dev = crtc->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> - const struct drm_display_mode *adjusted_mode;
> + struct intel_crtc_state *pipe_config =
> + to_intel_crtc_state(crtc->base.state);
>
> - if (!i915.fastboot)
> - return;
> + /* drm_atomic_helper_update_legacy_modeset_state might not be called. */
> + crtc->base.mode = crtc->base.state->mode;
> +
> + DRM_DEBUG_KMS("Updating pipe size %ix%i -> %ix%i\n",
> + old_crtc_state->pipe_src_w, old_crtc_state->pipe_src_h,
> + pipe_config->pipe_src_w, pipe_config->pipe_src_h);
>
> if (HAS_DDI(dev))
> intel_set_pipe_csc(&crtc->base);
> @@ -3324,27 +3333,26 @@ static void intel_update_pipe_size(struct intel_crtc
> *crtc)
> * fastboot case, we'll flip, but if we don't update the pipesrc and
> * pfit state, we'll end up with a big fb scanned out into the wrong
> * sized surface.
> - *
> - * To fix this properly, we need to hoist the checks up into
> - * compute_mode_changes (or above), check the actual pfit state and
> - * whether the platform allows pfit disable with pipe active, and only
> - * then update the pipesrc and pfit state, even on the flip path.
> */
>
> - adjusted_mode = &crtc->config->base.adjusted_mode;
> -
> I915_WRITE(PIPESRC(crtc->pipe),
> - ((adjusted_mode->crtc_hdisplay - 1) << 16) |
> - (adjusted_mode->crtc_vdisplay - 1));
> - if (!crtc->config->pch_pfit.enabled &&
> - (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) ||
> - intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
> - I915_WRITE(PF_CTL(crtc->pipe), 0);
> - I915_WRITE(PF_WIN_POS(crtc->pipe), 0);
> - I915_WRITE(PF_WIN_SZ(crtc->pipe), 0);
> + ((pipe_config->pipe_src_w - 1) << 16) |
> + (pipe_config->pipe_src_h - 1));
> +
> + /* on skylake this is done by detaching scalers */
> + if (INTEL_INFO(dev)->gen == 9) {
> + skl_detach_scalers(crtc);
> +
> + if (pipe_config->pch_pfit.enabled)
> + skylake_pfit_enable(crtc);
> + }
> + else if (INTEL_INFO(dev)->gen < 9 &&
> + HAS_PCH_SPLIT(dev)) {
> + if (pipe_config->pch_pfit.enabled)
> + ironlake_pfit_enable(crtc);
> + else if (old_crtc_state->pch_pfit.enabled)
> + ironlake_pfit_disable(crtc, true);
> }
> - crtc->config->pipe_src_w = adjusted_mode->crtc_hdisplay;
> - crtc->config->pipe_src_h = adjusted_mode->crtc_vdisplay;
> }
>
> static void intel_fdi_normal_train(struct drm_crtc *crtc)
> @@ -5003,7 +5011,7 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
> }
> }
>
> -static void ironlake_pfit_disable(struct intel_crtc *crtc)
> +static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force)
> {
> struct drm_device *dev = crtc->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -5011,7 +5019,7 @@ static void ironlake_pfit_disable(struct intel_crtc
> *crtc)
>
> /* To avoid upsetting the power well on haswell only disable the pfit if
> * it's in use. The hw state code will make sure we get this right. */
> - if (crtc->config->pch_pfit.enabled) {
> + if (force || crtc->config->pch_pfit.enabled) {
> I915_WRITE(PF_CTL(pipe), 0);
> I915_WRITE(PF_WIN_POS(pipe), 0);
> I915_WRITE(PF_WIN_SZ(pipe), 0);
> @@ -5038,7 +5046,7 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
>
> intel_disable_pipe(intel_crtc);
>
> - ironlake_pfit_disable(intel_crtc);
> + ironlake_pfit_disable(intel_crtc, false);
>
> if (intel_crtc->config->has_pch_encoder)
> ironlake_fdi_disable(crtc);
> @@ -5101,7 +5109,7 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
> if (INTEL_INFO(dev)->gen == 9)
> skylake_scaler_disable(intel_crtc);
> else if (INTEL_INFO(dev)->gen < 9)
> - ironlake_pfit_disable(intel_crtc);
> + ironlake_pfit_disable(intel_crtc, false);
> else
> MISSING_CASE(INTEL_INFO(dev)->gen);
>
> @@ -12246,7 +12254,6 @@ static bool intel_fuzzy_clock_check(int clock1, int
> clock2)
> base.head) \
> if (mask & (1 <<(intel_crtc)->pipe))
>
> -
> static bool
> intel_compare_m_n(unsigned int m, unsigned int n,
> unsigned int m2, unsigned int n2,
> @@ -12467,8 +12474,16 @@ intel_pipe_config_compare(struct drm_device *dev,
> DRM_MODE_FLAG_NVSYNC);
> }
>
> - PIPE_CONF_CHECK_I(pipe_src_w);
> - PIPE_CONF_CHECK_I(pipe_src_h);
> + if (!adjust) {
> + PIPE_CONF_CHECK_I(pipe_src_w);
> + PIPE_CONF_CHECK_I(pipe_src_h);
> +
> + PIPE_CONF_CHECK_I(pch_pfit.enabled);
> + if (current_config->pch_pfit.enabled) {
> + PIPE_CONF_CHECK_I(pch_pfit.pos);
> + PIPE_CONF_CHECK_I(pch_pfit.size);
> + }
> + }
What's this hack now? Aren't you computing the correct config or why do
you need to skip the state check?
>
> PIPE_CONF_CHECK_I(gmch_pfit.control);
> /* pfit ratios are autocomputed by the hw on gen4+ */
> @@ -12476,12 +12491,6 @@ intel_pipe_config_compare(struct drm_device *dev,
> PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios);
> PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits);
>
> - PIPE_CONF_CHECK_I(pch_pfit.enabled);
> - if (current_config->pch_pfit.enabled) {
> - PIPE_CONF_CHECK_I(pch_pfit.pos);
> - PIPE_CONF_CHECK_I(pch_pfit.size);
> - }
> -
> PIPE_CONF_CHECK_I(scaler_state.scaler_id);
>
> /* BDW+ don't expose a synchronous way to read the state */
> @@ -12644,7 +12653,8 @@ check_crtc_state(struct drm_device *dev, struct
> drm_atomic_state *old_state)
> struct intel_crtc_state *pipe_config, *sw_config;
> bool active;
>
> - if (!needs_modeset(crtc->state))
> + if (!needs_modeset(crtc->state) &&
> + !to_intel_crtc_state(crtc->state)->update_pipe)
> continue;
>
> __drm_atomic_helper_crtc_destroy_state(crtc, old_crtc_state);
> @@ -12940,7 +12950,6 @@ static int intel_modeset_all_pipes(struct
> drm_atomic_state *state)
> return ret;
> }
>
> -
> static int intel_modeset_checks(struct drm_atomic_state *state)
> {
> struct drm_device *dev = state->dev;
> @@ -13031,6 +13040,7 @@ static int intel_atomic_check(struct drm_device *dev,
> to_intel_crtc_state(crtc->state),
> pipe_config, true)) {
> crtc_state->mode_changed = false;
> + to_intel_crtc_state(crtc_state)->update_pipe = true;
> }
>
> if (needs_modeset(crtc_state)) {
> @@ -13128,16 +13138,30 @@ static int intel_atomic_commit(struct drm_device
> *dev,
> for_each_crtc_in_state(state, crtc, crtc_state, i) {
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> bool modeset = needs_modeset(crtc->state);
> + bool update_pipe = !modeset &&
> + to_intel_crtc_state(crtc->state)->update_pipe;
> + unsigned long put_domains = 0;
>
> if (modeset && crtc->state->active) {
> update_scanline_offset(to_intel_crtc(crtc));
> dev_priv->display.crtc_enable(crtc);
> }
>
> + if (update_pipe) {
> + put_domains = modeset_get_crtc_power_domains(crtc);
> +
> + /* make sure intel_modeset_check_state runs */
> + any_ms = true;
> + }
> +
> if (!modeset)
> intel_pre_plane_update(intel_crtc);
>
> drm_atomic_helper_commit_planes_on_crtc(crtc_state);
> +
> + if (put_domains)
> + modeset_put_power_domains(dev_priv, put_domains);
> +
> intel_post_plane_update(intel_crtc);
> }
>
> @@ -13454,10 +13478,6 @@ intel_commit_primary_plane(struct drm_plane *plane,
> if (!crtc->state->active)
> return;
>
> - if (state->visible)
> - /* FIXME: kill this fastboot hack */
> - intel_update_pipe_size(intel_crtc);
> -
> dev_priv->display.update_primary_plane(crtc, fb, crtc->x, crtc->y);
> }
>
> @@ -13476,6 +13496,9 @@ static void intel_begin_crtc_commit(struct drm_crtc
> *crtc,
> {
> struct drm_device *dev = crtc->dev;
> struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> + struct intel_crtc_state *old_intel_state =
> + to_intel_crtc_state(old_crtc_state);
> + bool modeset = needs_modeset(crtc->state);
>
> if (intel_crtc->atomic.update_wm_pre)
> intel_update_watermarks(crtc);
> @@ -13484,7 +13507,12 @@ static void intel_begin_crtc_commit(struct drm_crtc
> *crtc,
> if (crtc->state->active)
> intel_pipe_update_start(intel_crtc,
> &intel_crtc->start_vbl_count);
>
> - if (!needs_modeset(crtc->state) && INTEL_INFO(dev)->gen >= 9)
> + if (modeset)
> + return;
> +
> + if (to_intel_crtc_state(crtc->state)->update_pipe)
> + intel_update_pipe_config(intel_crtc, old_intel_state);
> + else if (INTEL_INFO(dev)->gen >= 9)
> skl_detach_scalers(intel_crtc);
> }
>
> diff --git a/drivers/gpu/drm/i915/intel_drv.h
> b/drivers/gpu/drm/i915/intel_drv.h
> index 22dc8b6b4198..73b254bcd451 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -337,6 +337,8 @@ struct intel_crtc_state {
> #define PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS (1<<0) /* unreliable sync
> mode.flags */
> unsigned long quirks;
>
> + bool update_pipe;
> +
> /* Pipe source size (ie. panel fitter input size)
> * All planes will be positioned inside this space,
> * and get clipped at the edges. */
> --
> 2.1.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
