From: Libin Yang <libin.y...@intel.com>

When modeset occurs and the TMDS frequency is set to some
speical value, the N/CTS need to be set manually if audio
is playing.

Signed-off-by: Libin Yang <libin.y...@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h    |  6 ++++++
 drivers/gpu/drm/i915/intel_audio.c | 42 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 48 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index da2d128..85f3beb 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7030,6 +7030,12 @@ enum skl_disp_power_wells {
                                        _HSW_AUD_DIG_CNVT_2)
 #define DIP_PORT_SEL_MASK              0x3
 
+#define _HSW_AUD_STR_DESC_1            0x65084
+#define _HSW_AUD_STR_DESC_2            0x65184
+#define AUD_STR_DESC(pipe)     _PIPE(pipe, \
+                                        _HSW_AUD_STR_DESC_1,   \
+                                        _HSW_AUD_STR_DESC_2)
+
 #define _HSW_AUD_EDID_DATA_A           0x65050
 #define _HSW_AUD_EDID_DATA_B           0x65150
 #define HSW_AUD_EDID_DATA(pipe) _PIPE(pipe, \
diff --git a/drivers/gpu/drm/i915/intel_audio.c 
b/drivers/gpu/drm/i915/intel_audio.c
index eddf37f..082f96d 100644
--- a/drivers/gpu/drm/i915/intel_audio.c
+++ b/drivers/gpu/drm/i915/intel_audio.c
@@ -235,6 +235,9 @@ static void hsw_audio_codec_enable(struct drm_connector 
*connector,
        const uint8_t *eld = connector->eld;
        uint32_t tmp;
        int len, i;
+       int cvt_idx;
+       int n_low, n_up, n;
+       int base_rate, mul, div, rate;
 
        DRM_DEBUG_KMS("Enable audio codec on pipe %c, %u bytes ELD\n",
                      pipe_name(pipe), drm_eld_size(eld));
@@ -267,6 +270,21 @@ static void hsw_audio_codec_enable(struct drm_connector 
*connector,
        tmp |= AUDIO_ELD_VALID(pipe);
        I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
 
+       if ((mode->clock == 297000) ||
+               (mode->clock == DIV_ROUND_UP(297000 * 1000, 1001))) {
+               tmp = I915_READ(HSW_AUD_PIPE_CONN_SEL_CTRL);
+               cvt_idx = (tmp >> pipe*8) & 0xff;
+               tmp = I915_READ(AUD_STR_DESC(cvt_idx));
+               base_rate = tmp & (1 << 14);
+               if (base_rate == 0)
+                       rate = 48000;
+               else
+                       rate = 44100;
+               mul = (tmp & (0x7 << 11)) + 1;
+               div = (tmp & (0x7 << 8)) + 1;
+               rate = rate * mul / div;
+       }
+
        /* Enable timestamps */
        tmp = I915_READ(HSW_AUD_CFG(pipe));
        tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
@@ -276,6 +294,30 @@ static void hsw_audio_codec_enable(struct drm_connector 
*connector,
                tmp |= AUD_CONFIG_N_VALUE_INDEX;
        else
                tmp |= audio_config_hdmi_pixel_clock(mode);
+
+       if ((mode->clock != 297000) &&
+               (mode->clock != DIV_ROUND_UP(297000 * 1000, 1001))) {
+               tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
+       } else {
+               for (i = 0; i < ARRAY_SIZE(aud_ncts); i++) {
+                       if ((rate == aud_ncts[i].sample_rate) &&
+                               (mode->clock == aud_ncts[i].clock)) {
+                               n = aud_ncts[i].n;
+                               break;
+                       }
+               }
+               if (n != 0) {
+                       tmp |= AUD_CONFIG_N_PROG_ENABLE;
+                       n_low = n & 0xfff;
+                       n_up = (n >> 12) & 0xff;
+                       tmp |= AUD_CONFIG_N_PROG_ENABLE;
+                       tmp &= ~AUD_CONFIG_UPPER_N_MASK;
+                       tmp |= (n_up << AUD_CONFIG_UPPER_N_SHIFT);
+                       tmp &= ~AUD_CONFIG_LOWER_N_MASK;
+                       tmp |= (n_low << AUD_CONFIG_LOWER_N_SHIFT);
+               }
+       }
+
        I915_WRITE(HSW_AUD_CFG(pipe), tmp);
 }
 
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to