2015-8-10 上午11:15於 "Yang, Libin" <libin.y...@intel.com>寫道：
>
> Hi Raymond,
>
> >
> > > > }
> > > >
> > > > + if (is_haswell_plus(codec)) {
> > > > + if (acomp && acomp->ops && acomp->ops->set_ncts)
> > > > + acomp->ops->set_ncts(acomp->dev, per_pin-
> > > >pin_nid - 4,
> > >
> > > Please describe more how "pin_nid - 4" is supposed to work. Also...
> >
> > OK, I see.
> >
> > >
> > > > + 0, runtime->rate);
> > >
> > > ... this implies that no MST support included?
> >
> > We will support MST later. Currently I just add the
> > interface to support MST, but not implementing it.
> Refer to DCN HDA040-A
> Multi-stream over Single Display Port
> Can the driver use subdevices for those display port support multi
streaming ?
>
> [Libin] What do you mean subdevice here,
> using a struct device to represent a dev_entry or an int type?
http://git.kernel.org/cgit/linux/kernel/git/tiwai/hda-emu.git/tree/codecs/stac9227-intel-d946gzis-mobo?id=HEAD
When HDA codecs have three Audio Input widgets, the driver create three
subdevices for those desktop which have three or more input sources in the
past
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 3/3
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
With the auto generic parser , the driver create one subdevice for Analog
two subdevices for Alt Analog
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 2: STAC92xx Alt Analog [STAC92xx Alt
Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
>
> The specification allow up to 64 device entries
> This mean the number of subdevices is equal to the device list length
> More than one audio output /converters can be connected to the multi
stream displayport pin widget but different device entry while only one
audio output can be dynamically allocated to other HDMI pin widget
>
> [Libin] Yes, Pin widget can have multiple device entry and connecting
different converters. The audio output will be based on device entry.
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
