DDI-A and DDI-E shares the 4 lanes. So when DDI-E is present
we need to configure lane count propperly for both.
This was based on Sonika's
[PATCH] drm/i915/skl: Select DDIA lane capability based upon vbt
Credits-to: Sonika Jindal <sonika.jin...@intel.com>
Cc: Xiong Zhang <xiong.y.zh...@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.v...@intel.com>
---
drivers/gpu/drm/i915/intel_ddi.c | 12 ++++++++++--
drivers/gpu/drm/i915/intel_dp.c | 8 +++++---
2 files changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 110d546..557cecf 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -3178,7 +3178,15 @@ void intel_ddi_init(struct drm_device *dev, enum port
port)
struct intel_digital_port *intel_dig_port;
struct intel_encoder *intel_encoder;
struct drm_encoder *encoder;
- bool init_hdmi, init_dp;
+ bool init_hdmi, init_dp, ddi_e_present;
+
+ /*
+ * On SKL we don't have a way to detect DDI-E so we rely on VBT.
+ */
+ ddie_present = IS_SKYLAKE(dev) &&
+ (dev_priv->vbt.ddi_port_info[PORT_E].supports_dp ||
+ dev_priv->vbt.ddi_port_info[PORT_E].supports_dvi ||
+ dev_priv->vbt.ddi_port_info[PORT_E].supports_hdmi);
init_hdmi = (dev_priv->vbt.ddi_port_info[port].supports_dvi ||
dev_priv->vbt.ddi_port_info[port].supports_hdmi);
@@ -3210,7 +3218,7 @@ void intel_ddi_init(struct drm_device *dev, enum port
port)
intel_dig_port->port = port;
intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) &
(DDI_BUF_PORT_REVERSAL |
- DDI_A_4_LANES);
+ ddi_e_present ? 0 : DDI_A_4_LANES);
intel_encoder->type = INTEL_OUTPUT_UNKNOWN;
intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 3ff2080..7ada79e 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -159,9 +159,11 @@ static u8 intel_dp_max_lane_count(struct intel_dp
*intel_dp)
u8 source_max, sink_max;
source_max = 4;
- if (HAS_DDI(dev) && intel_dig_port->port == PORT_A &&
- (intel_dig_port->saved_port_bits & DDI_A_4_LANES) == 0)
- source_max = 2;
+ if (HAS_DDI(dev) && (intel_dig_port->port == PORT_E ||
+ (intel_dig_port->port == PORT_A &&
+ (intel_dig_port->saved_port_bits &
+ DDI_A_4_LANES) == 0))
+ source_max = 2;
sink_max = drm_dp_max_lane_count(intel_dp->dpcd);
--
2.4.3
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
